Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 27 for “"Finite element approaches"”.
-
Finite element approaches to phase change problems with application to casting processes
An overview of two categories of numerical approaches to phase change problems, front tracking and fixed domain methods, is given. A further comparison of several fixed domain methods is made with some benchmark test problems. The approximation of the latent heat for isothermal phase change is a …
-
Behavior and Flexure Analysis of Balsa Wood Core Sandwich Composites: Experimental, Analytical and Finite Element Approaches
… with respect to the span is also investigated. A finite element model is developed to study the flexural and stress analysis. Based on the results, this thesis proposes a desirable analytical approach that correlates theory with experiment as defined below.
-
Microstructural-Based Modeling Framework for High Temperature Behavior of Ferritic-Martensitic Steels Using Crystal Plasticity and Grain Boundary Finite Element Approaches
… gradient field across the domain in linear elements. A Lie-group to Lie-algebra mapping was used to preserve orthogonality when projecting the rotation tensor from the elements’ Gauss points to the nodes.A statistically-stored dislocation density model was investigated to span the regimes of …
-
Numerical quantum modeling of field-effect-transistor with sub-10nm thin film semiconductor layer as active channel : physical limits and engineering challenges
… Green function, scattering matrix, finite difference versus finite element approaches. We compute the ballistic limits of these devices.
-
Gravity Induced Stresses in a Shrink-Fit Disk.
… of more complex problems, among them being finite difference techniques and finite element approaches.
-
Analysis of form errors in rings of non-uniform cross section due to workholding and machining loads
… recovery to final PTV surface profile variation. Finite element method is used to supplement the analytical model, and experiments are conducted to validate both the analytical and finite element approaches. Analytical and finite element results correspond well with experimental observations, with …
-
Convergence Acceleration in Numerical Methods
… sequences. Several hybrid methods, combining the finite difference and finite element approaches, are proposed. The methods have been tested either by test examples or by practical solutions to field problems.</p>
-
Dynamic analysis of highly deformable bodies undergoing large rotations
A new approach in which element reference frames are placed at each element and deformed with the elements at all times is introduced with the purpose of computing large deformations in the dynamic analysis of highly deformable bodies. Since the deformation rate of a deformable body is generally …
-
Higher order finite element modeling of acoustic propagation in a moving medium
"This research considers the finite. element modeling of the convective potential formulation of acoustic propagation and radiation. Higher order elements have been used to increase the computational efficiency of duct and turbofan models. Cubic serendipity elements have been implemented in a …
-
Computational Gradient Elasticity and Gradient Plasticity with Adaptive Splines
… requirement difficult to meet using traditional finite elements. Hermitian finite elements, mixed methods and meshless methods have been developed to meet this requirement, however these methods have their drawbacks in terms of efficiency, robustness or implementational convenience. Isogeometric …
-
Hydraulic Performance of Geosynthetic Clay Liners (GCLs) in Containment of Brine and Landfill Applications
… containment facility using semi-analytical and finite element approaches was conducted. The results highlighted the effect of interaction between interface transmissivity (θ) and hydraulic conductivity (k) on the estimated leakage (Q), hence the contaminant concentration (cp) at the aquifer …
-
Finite element approximation of elliptic homogenization problems in nondivergence-form
<p>This thesis focuses on the construction of finite element numerical homogenization schemes for both linear and selected fully-nonlinear elliptic partial differential equations in nondivergence-form.</p> <p>In the first part of the thesis, we study periodic homogenization problems of the form …
-
Transient analyses of viscoelastic materials with applications to numerical models
… three parts. In the first part, the time-domain finite element approach used by commercial tools like ABAQUS and ANSYS is reformulated in a general expression of viscoelasticity that does not require a constitutive relation. An alternative interpolation scheme for the relaxation function and the …
-
Smoothed Particle Hydrodynamic Modeling of Solid State Additively Manufactured Aluminum Alloys
… AFS-D is challenging because traditional finite element approaches fail to accommodate severe deformation. One solution is to use a meshfree framework, such as smoothed particle hydrodynamics (SPH), which better handles large deformation processes. This work aims to create a meshfree …
-
Adaptive finite element method for multiphase flow and poroelasticity
… To address this issue, we introduce adaptive finite element approaches guided by a posteriori error estimators to improve computational efficiency. A space-time discretization scheme with temporal and spatial mesh adaptivity is formulated for multiphase flow system. The solution algorithm …
-
Efficient and High-fidelity Finite Element Models for Fibre Composites
… the mechanical performance. The conventional finite element approaches assume that the curved fibres are locally straight, and many small elements are needed to model the curved fibres accurately. This increases the computational expense of gradient-based fibre angle optimization as it …
-
Influences of surface quality on the rolling contact fatique behaviour of ceramics
… stresses on the rolling tracks were measured. Finite Element Approaches were also employed to describe the contact stress status. Failure modes in relation to surface quality were discussed. The research has provided an understanding of the finishing process, surface quality and rolling contact …
-
An Efficient Computational Frameworks for Design and Analysis of Metamaterials
… for those structures heavily relied on the finite element approach, making the analysis quite computationally inefficient. This dissertation attempts to address these challenges with a novel Complementary Energy (CE) based analysis method and tiling-based structure generation technique. This …
-
Finite element modeling of martensitic phase transformation
Two finite element approaches are suggested for the modeling of multi-variant martensitic phase transitions in elastic materials at different length scales. The first one is designed for the modeling of phase transformation at a large length scale including meso-scale. It is based on the …
-
A STUDY OF THE TWO-DIMENSIONAL IMPACT RESPONSE OF CRUSHABLE FOAM
… mass approach and is formulated in terms of finite deformation. Appropriate equations of motion, stress strain relations, a material failure model and contact algorithms are developed. Results generated by this model exhibit good correlation with experiments, thus substantiating its validity. …
Page 1 of 2