Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 28 for “"Finite element method (FEM) model"”.

  1. DYNAMIC FEED RATE SCHEDULING IN MESO-SCALE MILLING PROCESSES

    This study aims to establish an intellectual method of selecting feed rate in meso-scale rough milling processes. This process requires appreciations of two fundamental sub-topics: investigation of the cutting mechanics through modelling of meso-scale milling process, and stress analysis and …

    nus Repository record for DYNAMIC FEED RATE SCHEDULING IN MESO-SCALE MILLING PROCESSES (opens in a new tab) Download file for DYNAMIC FEED RATE SCHEDULING IN MESO-SCALE MILLING PROCESSES (opens in a new tab)

  2. MACHINABILITY ANALYSIS OF ALUMINUM-CAST IRON (AlSi-GCI) BIMETALLIC COMPONENTS THROUGH EXPERIMENTAL AND NUMERICAL STUDIES

    … on the cutting tool. In addition, a numerical finite element method (FEM) model was also developed to investigate the thermo-mechanical behaviour of the CBN cutting tool and simulate the bimetal turning process under different cutting conditions. Finally, a study to reduce the cutting forces …

    mcmaster Repository record for MACHINABILITY ANALYSIS OF ALUMINUM-CAST IRON (AlSi-GCI) BIMETALLIC COMPONENTS THROUGH EXPERIMENTAL AND NUMERICAL STUDIES (opens in a new tab)

  3. Modeling the low-frequency response of seagrass in a resonator tube

    … seagrass tissue itself. Previous mathematical models that treat the seagrass tissue as a fluid have not sufficiently explained acoustic propagation through seagrass. In the present work, a Finite Element Method (FEM) model was used alongside data from the literature to determine if an elastic …

    texas Repository record for Modeling the low-frequency response of seagrass in a resonator tube (opens in a new tab)

  4. Deflection Based Design Method for CRCP Whitetopping and Unbonded Overlays

    Existing design methodologies for concrete overlays often rely on outdated empirical approaches or complex mechanistic models that lack adequate field validation. This has resulted in a significant gap in practice, particularly for the design of Continuously Reinforced Concrete Pavement (CRCP) …

    ttu Repository record for Deflection Based Design Method for CRCP Whitetopping and Unbonded Overlays (opens in a new tab)

  5. 3D Finite Element Analysis and Experimental Study of Stability of Slotted Liners

    … failure are reviewed, and a comprehensive FEM analysis of various slotted liner failure mechanisms, including axial compression, bending, and collapse is studied. Experiments are carried out to compare with simulation. Experiments were designed to select the grades of materials, …

    tamu Repository record for 3D Finite Element Analysis and Experimental Study of Stability of Slotted Liners (opens in a new tab)

  6. All-Electrical Oxygen Doping in Perovskite Oxides

    … using simple electrical controls. The model material employed to this end is YBa2 Cu3 O7−δ (YBCO) but results in ferroic manganites indicate that the behavior might be general to the material family. We have unambiguously demonstrated that oxygen vacancies located in the CuO chains in …

    liege Repository record for All-Electrical Oxygen Doping in Perovskite Oxides (opens in a new tab) Download PDF for All-Electrical Oxygen Doping in Perovskite Oxides (opens in a new tab)

  7. Finite Element Model-based Assessment of the Female Cervical Spine in a Rear-End Impact Simulation

    … However, there are few similar studies for female subjects. It is important to study the female cervical spine in whiplash simulations because more women than men suffer whiplash injury with a 1.5 to 2 times higher risk with women more frequently suffering long-term effects. The objective of …

    ttu Repository record for Finite Element Model-based Assessment of the Female Cervical Spine in a Rear-End Impact Simulation (opens in a new tab)

  8. On modelling of the structural integrity of rails and crossings

    … and increase the reliability of crossings. A finite element method (FEM) model of the wheel-crossing dynamic contact interaction has been successfully developed and utilised to investigate the impact of crossing material behaviour, wheel speed, and crossing angle on the vertical impact force …

    birmingham Download PDF for On modelling of the structural integrity of rails and crossings (opens in a new tab)

  9. Numerical Model of Magnetostriction and Lorentz Force Mechanisms in Electromagnetic Acoustic Transducers

    … thesis, a successful development of a numerical model of magnetostriction and Lorentz force mechanisms in Electromagnetic Acoustic Transducers (EMATs) for nondestructive evaluation of steel components is presented. A Periodic Permanent Magnet Electromagnetic Acoustic Transducer (PPM-EMAT) scanner …

    toronto-retro Repository record for Numerical Model of Magnetostriction and Lorentz Force Mechanisms in Electromagnetic Acoustic Transducers (opens in a new tab)

  10. Modeling and fabrication of prosthetic sockets using selective laser sintering

    … the development of a computer-aided design model of the socket with compliant features to enhance comfort, structural analysis using a Finite Element Method (FEM) model, fabrication of a functional prototype using SLS, and experimental validation of the FEM analysis. The validation involved …

    texas Repository record for Modeling and fabrication of prosthetic sockets using selective laser sintering (opens in a new tab)

  11. Estimating Primary Consolidation Settlement in a Clay Till Foundation Below an Earthen Embankment

    … then used to define the foundation soils in a finite element method (FEM) model, developed to simulate embankment construction and perform deformation analyses. The hydraulic conductivity of the clay till, as determined by laboratory and in-situ tests, was estimated to range from 1x10-10 m/s to …

    sask Repository record for Estimating Primary Consolidation Settlement in a Clay Till Foundation Below an Earthen Embankment (opens in a new tab)

  12. Generating and Simulating CANDU® Fuel Channel Eddy Current Data to Demonstrate Multi-Parameter Extraction Capabilities

    … of interest. This thesis presents an analytical model of the eddy current gap probe response with the addition of a copper plate. This analytical model was shown to have excellent agreement with simulation data from a validated Finite Element Method (FEM) model. Efforts made to detect …

    queens Repository record for Generating and Simulating CANDU® Fuel Channel Eddy Current Data to Demonstrate Multi-Parameter Extraction Capabilities (opens in a new tab)

  13. Computational modeling of electro-elasto-capillary phenomena in dielectric elastomers

    … on DEs. Furthermore, all available computational models for DEs are monolithically coupled, which are extremely computationally inefficient, and place stringent limits on the DE system sizes that can be modeled. In this thesis, a finite element method (FEM) model is developed to capture surface …

    bu Repository record for Computational modeling of electro-elasto-capillary phenomena in dielectric elastomers (opens in a new tab)

  14. Thermo-poromechanical modeling of saturated clay soils considering bound water dehydration.

    … To address these gaps, a novel constitutive model is proposed for describing the thermo-elastoplastic behaviors of water-saturated clayey soils. The model incorporates the effects of temperature variation and mechanical loading on elastoplastic strains and dehydration behavior. The …

    concordia Download PDF for Thermo-poromechanical modeling of saturated clay soils considering bound water dehydration. (opens in a new tab)

  15. Modeling and control of drillstring dynamics for vibration suppression

    … the drill-string dynamics through accurately modeling of the drill-string and bottom-hole assembly (BHA) dynamics, and then develop controllers to suppress the vibrations. Modeling drill-string dynamics for directional drilling operation is highly challenging because the drill-string and BHA …

    texas Repository record for Modeling and control of drillstring dynamics for vibration suppression (opens in a new tab)

  16. Numerical study on the seismic behavior of inclined piles in liquefiable soils

    … Firstly, a comprehensive three-dimensional (3D) Finite Element Method (FEM) model of the soil-pile interaction system is established in OpenSees. Special attentions have been given to the liquefaction behavior of soil, pile geometry simulation, and the slippage and separation mechanisms at the …

    auckland-ms Repository record for Numerical study on the seismic behavior of inclined piles in liquefiable soils (opens in a new tab)

  17. Acoustic-structural interaction: understanding and application in sensor development and metamaterials

    … and noise reduction metamaterials. First, a finite element method (FEM) model and large-scale device are developed to understand how the interaction between the diaphragm and its backing air cavity affects the equivalent mass, stiffness, and damping of air-backed diaphragms. The numerical and …

    temple Repository record for Acoustic-structural interaction: understanding and application in sensor development and metamaterials (opens in a new tab)

  18. Multi-Angle Beam Generation and Steering via Meander-Line-Coil EMATs

    … on their theoretical foundations, simulated modelling, and experimental validations. Whilst the detection of defects was not investigated, this work thoroughly examines the EMAT’s capability as a conventional transducer to steer the angle of its oblique ultrasonic waves. This culminates in …

    uwtsd Repository record for Multi-Angle Beam Generation and Steering via Meander-Line-Coil EMATs (opens in a new tab) Download PDF for Multi-Angle Beam Generation and Steering via Meander-Line-Coil EMATs (opens in a new tab)

  19. Numerical and Analytical Modeling of Piezoelectric Transduction in Biomedical Applications

    This thesis investigates numerical and analytical modeling of two main applications of piezoelectric materials in sensing and actuation. For the first application, we look at a conformable piezoelectric sensor for decoding facial strains. The sensor has a multi-layer structure composed of four …

    buffalo Repository record for Numerical and Analytical Modeling of Piezoelectric Transduction in Biomedical Applications (opens in a new tab)

  20. Vibro-acoustical analysis and design of a multiple-layer constrained viscoelastic damping structure

    … to the following four mainstream approaches: modeling techniques of damping treatments/materials; control through the electrical-mechanical effect using the piezoelectric layer; optimization by adjusting the parameters of the structure to meet the design requirements; and identification of the …

    mtu Repository record for Vibro-acoustical analysis and design of a multiple-layer constrained viscoelastic damping structure (opens in a new tab)

Page 1 of 2