Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 31 for “"Finite elements analysis"”.

  1. Finite elements analysis of pipe deformation in oil wells

    Includes bibliographical references (pages 55-58).

    colo-mines Repository record for Finite elements analysis of pipe deformation in oil wells (opens in a new tab)

  2. Compliant Prosthetic Knee Extension Aid: A Finite Elements Analysis Investigation of Proprioceptive Feedback During the Swing Phase of Ambulation

    … on the inner part of a prosthetic socket. A finite elements model was created with ANSYS to design the prosthetic knee compliant add-on and used to select the geometry to meet prosthetic-swing criteria. Data collected from the knee FEA model was used to apply correct loading at the knee in a …

    usf Repository record for Compliant Prosthetic Knee Extension Aid: A Finite Elements Analysis Investigation of Proprioceptive Feedback During the Swing Phase of Ambulation (opens in a new tab)

  3. Studies in the photoelectrochemistry of bismuth vanadate using scanning electrochemical microscopy

    … Photoelectrochemical measurements and material analysis were done to discuss the factors that affect performance of BiVO₄. Finite elements analysis was also performed to explain the electron-hole transport and electrochemical reactions at W/Mo-BiVO₄ electrodes in solutions. Addition of …

    texas Repository record for Studies in the photoelectrochemistry of bismuth vanadate using scanning electrochemical microscopy (opens in a new tab)

  4. Χρήση μοντέλων στερεολιθογραφίας για τη διερεύνηση της λειτουργικής/μηχανικής συμπεριφοράς προϊόντων κατά τα διάφορα στάδια ανάπτυξης

    … δεδομένα που αποκομίσθηκαν από τη μέθοδο Finite Elements Analysis (FEA). Τα αποτελέσματα συμφωνούνε σε μεγάλο βαθμό. Επίσης μελετήθηκε η δυνατότητα μοντελοποίησης υπό κλίμακα με τη μέθοδο της στερεολιθογραφίας, για ένα απλό μοντέλο. Η πρόβλεψη της συμπεριφοράς του μοντέλου από αλουμίνιο σε …

    greece Repository record for Χρήση μοντέλων στερεολιθογραφίας για τη διερεύνηση της λειτουργικής/μηχανικής συμπεριφοράς προϊόντων κατά τα διάφορα στάδια ανάπτυξης (opens in a new tab)

  5. Design and implementation of a biomimetic serpentine robotic mechanism

    … The DBD joint is analyzed using geometrical and Finite Elements Analysis (FEA) and is the fundamental element of the ERMIS mechanism. The construction process of the manipulator is presented and the key issues addressed during development is described. Of particular inter- est are the innovative …

    greece Repository record for Design and implementation of a biomimetic serpentine robotic mechanism (opens in a new tab)

  6. Πειραματική και αναλυτική διερεύνηση της συμπεριφοράς διεπιφανειών υδραυλικών ενεμάτων υψηλής διεισδυτικότητας και λίθινων ή πλίνθινων υπόβαθρων

    … material interfaces are simulated by means of Finite Elements Analysis using a 2D model. Two different models are applied for the description of mechanical characteristics of the interfaces. Both models are applied, after calibration, to reproduce the experimental results. In general, the …

    greece Repository record for Πειραματική και αναλυτική διερεύνηση της συμπεριφοράς διεπιφανειών υδραυλικών ενεμάτων υψηλής διεισδυτικότητας και λίθινων ή πλίνθινων υπόβαθρων (opens in a new tab)

  7. Designing and constructing a prototype standalone bioreactor using 3D printing and finite element analysis : a tool to define osteogenic differentiation in a 3D mechanical environment

    … were used in test experiments. Additionally, a finite elements analysis was carried out on the bioreactor chamber to quantify the compression and perfusion speed necessary for viability of mesenchymal stem cells inside the bioreactor system. A flow analysis of culture media was also analyzed for …

    reykjavik Repository record for Designing and constructing a prototype standalone bioreactor using 3D printing and finite element analysis : a tool to define osteogenic differentiation in a 3D mechanical environment (opens in a new tab)

  8. Reinforcement of fibrous laminated composite structures using graphene nanoplatelets

    … and processes, the computational methods (finite elements analysis, analytical, statistics, etc.), as well as the most important results. All the above is presented analytically in the main body of the Thesis.

    greece Repository record for Reinforcement of fibrous laminated composite structures using graphene nanoplatelets (opens in a new tab)

  9. Nonlinear modelling and analysis of reinforced thermoplastic pipes for offshore applications

    … subjected to various loads are conducted using Finite Elements Analysis (FEA). The RTP is modelled using shell elements available in Abaqus/Standard with both geometric and material nonlinearities considered. In order to model the material nonlinearity, equations describing the nonlinear …

    unsw Repository record for Nonlinear modelling and analysis of reinforced thermoplastic pipes for offshore applications (opens in a new tab)

  10. Application of Euler-Bernoulli finite element methods for torque and drag model verification

    … on torque and drag calculations. Additionally, finite elements analysis (FEA) has been implemented to validate torque and drag calculations throughout the industry. However, the application of FEA often includes mesh generations which creates a 3D model of the drill pipe and subdivides the …

    texas Repository record for Application of Euler-Bernoulli finite element methods for torque and drag model verification (opens in a new tab)

  11. Investigation of the Mechanical Behavior of Carbon Fiber- Carbon Nanofiber Composite for Energy Storage Application in Flywheel

    … the last objective was mostly carried out via finite elements analysis based on input from the prior objectives. Our studies pointed to an increase of at most 25% in the interlaminar fracture toughness of the carbon fiber composite laminate due to the introduction of CNFs mat interleafs. The …

    tamu Repository record for Investigation of the Mechanical Behavior of Carbon Fiber- Carbon Nanofiber Composite for Energy Storage Application in Flywheel (opens in a new tab)

  12. Fault mitigation in permanent magnet synchronous motors under an internal turn-to-turn failure

    … combination. Through experimental and finite elements analysis this dissertation demonstrates the effectiveness of the proposed fault mitigation technique in regulating the fault current during a turn-to-turn fault.

    msu Repository record for Fault mitigation in permanent magnet synchronous motors under an internal turn-to-turn failure (opens in a new tab)

  13. Neural network based simulation of sea-state sequences

    … and the pile sleeve shims were modeled using the finite elements analysis facilities within ABAQUS. Dynamic analyses of the system for a sea-state characterized by Hs and and modeled as a combination of several wave components were performed. A table of safe and unsafe sea-states was generated by …

    brunel Repository record for Neural network based simulation of sea-state sequences (opens in a new tab)

  14. Automatic assembly-model synthesis in mechanical design using simulated dynamic finite-element experiments

    … they could perform simulated experiments using Finite Elements Analysis models instead of using full scale prototypes. A major concern about using FE simulated experiments is the validation of the FE models in terms of their accuracy. FE model validation is even more complicated to be achieved …

    greece Repository record for Automatic assembly-model synthesis in mechanical design using simulated dynamic finite-element experiments (opens in a new tab)

  15. Κατεργασιμότητα λίαν υψηλής ακρίβειας βιολογικών εμφυτευμάτων τεχνητού ισχίου

    … calculating models, and also with the results of finite elements analysis. Furthermore it is presented the designing and manufacturing of a die for the construction of a stem. Afterwards, there are presented the methods of checking the accuracy of the implants. In the first part investigated the …

    greece Repository record for Κατεργασιμότητα λίαν υψηλής ακρίβειας βιολογικών εμφυτευμάτων τεχνητού ισχίου (opens in a new tab)

  16. Computer simulations of realistic three-dimensional microstructures

    … microstructures have been implemented in the 3D finite-elements (FE)-based framework for simulations of micro-mechanical response and stress-strain curves. Finally, a new unbiased and assumption free dual-scale virtual cycloids probe for estimating surface area of 3D objects constructed by 2D …

    gatech Repository record for Computer simulations of realistic three-dimensional microstructures (opens in a new tab)

  17. Advancing flavour/fragrance oils microencapsulation: exploring the impact of core oil on microcapsule characteristics

    … modulus of microcapsules shell was determined by finite elements analysis (6.2 ± 1.0 GPa). Both the EE and mechanical properties were significantly higher than those of chitosan/gum arabic or commercially formaldehyde-based microcapsules, suggesting the feasibility of gelatine/gum arabic to be …

    birmingham Download PDF for Advancing flavour/fragrance oils microencapsulation: exploring the impact of core oil on microcapsule characteristics (opens in a new tab)

  18. Optimizing the Centering Behavior of an External Magnet Assembly for Use with Percutaneous Ultrasound Gastrostomy (PUG) Procedures

    … force requirements at either tissue depth, but finite element analysis of a double-sized PMA suggests that it will meet the minimum thick tissue force requirement. These innovations mitigate concerns with lifting the IBC to the center of the ultrasound transducer’s viewing window at the …

    jhu Repository record for Optimizing the Centering Behavior of an External Magnet Assembly for Use with Percutaneous Ultrasound Gastrostomy (PUG) Procedures (opens in a new tab)

  19. MECHANICAL ANALYSIS OF THE BACTERIAL CELL ENVELOPE

    … envelope using extrusion loading and inverse finite elements Analysis.Physical forces are experienced by bacteria in many situations including rapid changes in osmolality, adhesion to surfaces and forces generated by growth in confined spaces and biofilms. Furthermore, the primary goal of …

    cornell Repository record for MECHANICAL ANALYSIS OF THE BACTERIAL CELL ENVELOPE (opens in a new tab)

  20. Lineární analýza ztráty stability spalinového potrubí

    Diplomová práce se věnuje problematice ztráty stability tenkostěnného spalinového potrubí v uhelné elektrárně. Problémem tenkostěnných konstrukcí je jejich náchylnost ke ztrátě stability vlivem mimořádných podmínek, jako je například podtlak, působení větru, sněhu a zemětřesení. Cílem je provést …

    brno-tech Repository record for Lineární analýza ztráty stability spalinového potrubí (opens in a new tab)

Page 1 of 2