Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 24 for “"Fire-resistant materials"”.

  1. Experimental and Computational Evaluation of a Summed Cavity Nomex Honeycomb Helmholtz Resonator Acoustic Absorber

    … the aerospace requirements of minimal mass and fire safety led to the consideration of Nomex honeycomb Helmholtz resonator acoustic panels. Their sub-wavelength attenuation, tunability, light weight and fire resistance make them an optimal fit for this application. A novel phenomenon was …

    queens Repository record for Experimental and Computational Evaluation of a Summed Cavity Nomex Honeycomb Helmholtz Resonator Acoustic Absorber (opens in a new tab)

  2. Building Resilience

    As wildfires grow in frequency and severity, many communities remain vulnerable due to inadequate use of fire-resistant materials and a lack of preventative design strategies implemented and researched across disciplines. This thesis investigates how architectural design can reduce wildfire risk by …

    maryland Repository record for Building Resilience (opens in a new tab)

  3. Enhancing Fire Resistance of Cement-Based Materials through Nanoparticles and CO2 Curing

    … climate change increases the risk of residential fires, there is growing need for fire-resistant materials. This study examines different materials and methods to improve the fire resistance of cement-based materials while incorporating sustainability materials. Through a series of laboratory …

    texas-state Repository record for Enhancing Fire Resistance of Cement-Based Materials through Nanoparticles and CO2 Curing (opens in a new tab)

  4. Decay resistance of slurry erominated wet-process high-density hardboard

    … board which was developed initially as a fire-resistant materials only. Non-brominated and brominated hardboards were examined, using a soil-jar method, for their resistance to decay by four brcwn-rot and two white-rot fungi. Six types of hardboard were used; fiber only, fiber plus …

    ubc Repository record for Decay resistance of slurry erominated wet-process high-density hardboard (opens in a new tab) Download PDF for Decay resistance of slurry erominated wet-process high-density hardboard (opens in a new tab)

  5. Numerical modelling of braided fibres for reinforced concrete

    Fire has been always a major concern for designers of steel and concrete structures. Designing fire-resistant structural elements is not an easy task due to several limitations such as the lack of fire-resistant construction materials. Concrete reinforcement cover and external insulation are the …

    glasgow Download PDF for Numerical modelling of braided fibres for reinforced concrete (opens in a new tab)

  6. Valorization of mining and metallurgical wastes through alkali activation

    … residues, for the production of alkali activated materials (AAMs) with desirable chemical and mineralogical composition, and beneficial properties. AAMs were produced under the optimum synthesis conditions using activating solution consisting of sodium hydroxide (NaOH) and sodium silicate …

    greece Repository record for Valorization of mining and metallurgical wastes through alkali activation (opens in a new tab)

  7. Fire retardant polyurethane foams

    … and their application in developing an effective fire-stop foam for the oil and gas industry. The research began by formulating a polyurethane foam with rapid curing properties and flexibility, achieving a material that met these initial objectives. As the study progressed, the incorporation of …

    strathclyde Repository record for Fire retardant polyurethane foams (opens in a new tab)

  8. Flame Retardant System for Acrylonitrile-Butadiene-Styrene (ABS) Polymer Blended with Montmorillonite Clay via Melt Processing

    … clay, a non-halogenated additive, to enhance fire retardancy. ABS is a primary component of plastic computer housings, and formulation of a non-halogenated fire retardant in ABS would allow the original equipment manufacturers (OEMs) to recycle the plastic housing in compliance with a pending …

    texas-state Repository record for Flame Retardant System for Acrylonitrile-Butadiene-Styrene (ABS) Polymer Blended with Montmorillonite Clay via Melt Processing (opens in a new tab)

  9. Flame Retardant Properties of Phenolic Thermoset Amended with Siloxane and Montmorillonite Clay

    … While phenolic matrix composites are inherently fire retardant, better properties are required in some applications (such as submarines), where safety tolerances can be very demanding. The direction of this research was to determine if pendant dimethylsiloxanes or montmorillonite clay …

    texas-state Repository record for Flame Retardant Properties of Phenolic Thermoset Amended with Siloxane and Montmorillonite Clay (opens in a new tab)

  10. Preparation of a mechanically strong, flame retarding polymer/microtubule composite

    … combustibles, and are very likely to cause a fire. Since most polymers do not have the nature of flame retardancy, flame retardant polymer composites are a key research direction. In this study, we investigated the sealing mechanisms through a morphological observation by filling and sealing …

    adelaide Repository record for Preparation of a mechanically strong, flame retarding polymer/microtubule composite (opens in a new tab)

  11. Synthesis, characterization and applications of fats and oil derived phase change materials

    … AT AUTHOR'S REQUEST.] Phase Change Materials (PCM) are materials that absorb or release relatively large amounts of latent heat and are termed as "latent" thermal storage materials. A substantial market for PCM based thermal energy storage systems (TES) is developing in the …

    missouri Repository record for Synthesis, characterization and applications of fats and oil derived phase change materials (opens in a new tab)

  12. Fire response of reinforced concrete beams strengthened with near-surface mounted FRP reinforcement

    … FRP strengthened RC members have to satisfy fire resistance requirements specified in codes and standards. Due to sensitivity of FRP to high temperatures, FRP strengthened RC members usually exhibit relatively low fire resistance. However, NSM FRP strengthening is considered to possess higher …

    msu Repository record for Fire response of reinforced concrete beams strengthened with near-surface mounted FRP reinforcement (opens in a new tab)

  13. Fire-resistant steels for construction applications

    Includes bibliographical references (pages 123-124).

    colo-mines Repository record for Fire-resistant steels for construction applications (opens in a new tab)

  14. Performance-based approach for evaluating the fire response of prestressed concrete double T-beams

    … numerous building applications. Since structural fire safety is a high priority, building codes generally specify fire resistance requirements. The current approach for evaluating fire resistance of structural members, including those of PPC double T-beams, through prescriptive-based methods has …

    msu Repository record for Performance-based approach for evaluating the fire response of prestressed concrete double T-beams (opens in a new tab)

  15. Behavior of ultra-high performance concrete beams under fire conditions

    … construction, the provision of appropriate fire resistance is a key safety consideration. Since UHPC is a new construction material, there is limited information, as well as limited research on the fire performance of UHPC members. Preliminary research at the material and structural level …

    msu Repository record for Behavior of ultra-high performance concrete beams under fire conditions (opens in a new tab)

Page 1 of 2