Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 14 of 14 for “"Firing cycles"”.

  1. Color stability of pressed IPS e.max lithium disilicate ceramics after repeated firing cycles

    … disilicate ceramic material after repeated firing cycles. To determine and evaluate correlation of CIELAB and CIEDE2000 values analyzed by X-Rite Color i5 Spectrophotometer, VITA EasyShade® Advance 4.0 (VITA Zahnfabrik) and Adobe Photoshop CC. MATERIALS AND METHODS: 36 specimens 8mmX10mm at …

    bu Repository record for Color stability of pressed IPS e.max lithium disilicate ceramics after repeated firing cycles (opens in a new tab)

  2. The effect of repetitive firing cycles on physical and optical properties of zirconia reinforced lithium silicate ceramics

    This study’s objective was to evaluate repetitive firing cycles’ effects on the translucency, light’s absorption coefficient, and flexural strength of zirconia-reinforced lithium silicate ceramics. Two zirconia-reinforced lithium silicate ceramics and one lithium disilicate glass-ceramic were …

    bu Repository record for The effect of repetitive firing cycles on physical and optical properties of zirconia reinforced lithium silicate ceramics (opens in a new tab)

  3. Effect of Multiple Firings for Staining and Glazing on the Flexural Strength of 3D-Printed Zirconia

    Purpose: To evaluate how multiple firings during the staining and glazing process affect the flexural strength of 3D-printed zirconia compared to conventionally milled zirconia, with the goal of providing evidence-based recommendations for clinical protocols. Materials and methods: Following the …

    tamu Repository record for Effect of Multiple Firings for Staining and Glazing on the Flexural Strength of 3D-Printed Zirconia (opens in a new tab) Embargoed until 2028-05-01

  4. Effect of firing cycle and etching condition on resin cement tensile bond strength of Li2O-SiO2 system glass ceramics

    OBJECTIVE: To evaluate if the firing cycles and etching conditions have an effect on the tensile bonding strength (TBS) of IPS e.max-CAD and CeltraDUO. METHODS: Lithium-disilicate (IPS e.max-CAD) ceramic blocks and zirconia reinforced lithium-disilicate (CeltraDUO) were sectioned into rectangular …

    bu Repository record for Effect of firing cycle and etching condition on resin cement tensile bond strength of Li2O-SiO2 system glass ceramics (opens in a new tab)

  5. Mechanical and optical properties of machinable and pressable glass ceramic

    … of various finishing procedures and repeated firings on color stability and translucency of different ceramics. Also, to examine the mechanical properties after finishing procedures. MATERIALS & METHODS: Four glass-ceramics were investigated; IPS e.max CAD, IPS e.max Press, Celtra Duo, and …

    bu Repository record for Mechanical and optical properties of machinable and pressable glass ceramic (opens in a new tab)

  6. Retention of the anatase phase in TiO2 through the use of bauxite and zircon dopants

    … of the anatase phase is retained through 2 hour firing cycles. Using EDS, zircon particles were observed to nucleate elongated prismatic rutile grains. Whilst XRD analysis showed that the addition of zircon has a marked effect on retarding the overall transition of anatase to rutile, increasing …

    unsw Repository record for Retention of the anatase phase in TiO2 through the use of bauxite and zircon dopants (opens in a new tab)

  7. Effect of veneering technique, heat rate, holding time and zirconia thickness on the mechanical properties of porcelain veneers

    … techniques, Y-TZP core thicknesses, and firing cycles with different heat rates and holding times on the mechanical properties of veneering porcelain. MATERIALS AND METHODS: Biaxial flexural strength and Thermal shock resistance tests were conducted to evaluate the mechanical properties …

    bu Repository record for Effect of veneering technique, heat rate, holding time and zirconia thickness on the mechanical properties of porcelain veneers (opens in a new tab)

  8. Flow and combustion in direct injection spark ignition engines

    … during the induction and compression strokes of firing cycles to investigate the effect of in-cylinder flow structures on cycle-by-cycle variations in combustion. The cycles were separated into subsets conditioned on burn rate, as indicated by in-cylinder pressure measurements. The WRI and WMI …

    oxford Repository record for Flow and combustion in direct injection spark ignition engines (opens in a new tab)

  9. Φυσικομηχανική και ιστολογική διερεύνηση πειραματικών βιοενεργών κεραμικών επιφανειών οδοντικών προσθετικών αποκαταστάσεων

    … dental porcelainwere constructed and underwent firing cycles at the crystallization temperatureand the temperature just below the melting range, selected after conductingthermal analysis (DG-DTA) of the composite. The recommended temperature forthe commercial porcelain was examined, too. All …

    greece Repository record for Φυσικομηχανική και ιστολογική διερεύνηση πειραματικών βιοενεργών κεραμικών επιφανειών οδοντικών προσθετικών αποκαταστάσεων (opens in a new tab)

  10. Colour measurement of ceramic samples using a commercial colour measuring device and a laboratory spectrophotometer

    … of ceramic, type of ceramic sample, number of firing cycles, operator, and method of condensation. An attempt was made to determine the correlation between fabrication technique, porosity and colour co-ordinates. The results indicated that IdentaColor II used a measurement system for colour …

    edinburgh Repository record for Colour measurement of ceramic samples using a commercial colour measuring device and a laboratory spectrophotometer (opens in a new tab)

  11. Ion Current Analysis And Misfire Prediction During Cold Start In A Compression Ignition Engine

    … challenges such as combustion instability, misfiring, and high unburnt hydrocarbon emissions when started under severe cold conditions. These issues can be mitigated through the use of real-time feedback to the engine's control module. The ion current signal, reflective of combustion and …

    wayne-thes Repository record for Ion Current Analysis And Misfire Prediction During Cold Start In A Compression Ignition Engine (opens in a new tab)

  12. A study to quantitatively analyze cold start emissions for a gasoline direct injection engine

    … decreased monotonically among the first five firing cycles of the cold start. The preliminary quantitative analysis revealed that for gasoline-fueled cold starts not all the injected fuel was collected in the exhaust gas. The non-collected fuel was potentially due to fuel wall wetting and …

    texas Repository record for A study to quantitatively analyze cold start emissions for a gasoline direct injection engine (opens in a new tab)

  13. The use of CAD CAM For Fixed Partial Prostheses

    … and the impact on seating.<br/>2. The effect of firing cycles and zirconia thickness on the fit of zirconia bridges.<br/>3. The effect of span length on the fit of three and four unit all zirconia bridges.<br/>4. The effect of veneering on the strength of three unit zirconia bridges.<br/>5. The …

    dundee Repository record for The use of CAD CAM For Fixed Partial Prostheses (opens in a new tab) Download PDF for The use of CAD CAM For Fixed Partial Prostheses (opens in a new tab)