Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 13 of 13 for “"Fit-up"”.
-
Fit condition and fit-up behavior - Impact on design and construction of steel I-girder bridges
… selection of various attributes to facilitate fit-up during I-girder bridge construction. Concepts and procedures for explicit calculation of locked-in forces due to cross-frame detailing are developed and discussed. Fit-up forces are evaluated and discussed for a suite of bridge cases analyzed …
-
Influence of cross-frame detailing on curved and skewed steel I-girder bridges
… these torsional displacements can impact the fit-up of the members, the erection requirements (crane positions and capacities, the number of temporary supports, tie down requirements, etc.), the bearing cost and type, and the overall strength of the structure. Furthermore, significant layover …
-
Skewed Cross Frame Connection Stiffness
… cross frames are often oriented parallel to the supports and hence, at an angle to the girder. To facilitate construction fit-up, plates, bent to match the skew angle, form the cross frame to stiffener connection. While the bent plate connection is a simple solution, it could introduce undesirable …
-
Brace Effectiveness of Cross-frame Layout and Connection Design on Skewed Steel Bridges During Construction
… the skew angle to avoid problems associated with fit-up during erection. The American Association of State Highway and Transportation Officials (AASHTO) provisions for bridges with skew angle greater than 20 degrees are based on the assumption that cross-frames are oriented perpendicular to the …
-
Equations of state for propyne
<p>P-V-T data for propyne have been fit using the Martin-Hou and the Benedict-Webb-Rubin equations of state. The Martin-Hou equation, with its constants calculated from the critical properties and a vapor pressure point for the gas, fit up to 1.1 to 1.5 times the critical density with deviations of …
-
Laser lap welding of 80Y90T steel with plasma arc augmentation
… welding, even in the presence of poor part fit-up. The negative effects of material gap, on PALW and laser only welds, are explained and the methods are compared. The use of plasma arc augmentation to increase the tolerance to gap of a laser welding system is shown. The influence of the …
-
Development of a real-time ultrasonic sensing system for automated and robotic welding
… the inherent process variables of part location, fit up, orientation and repeatability. Considering these aspects, to ensure weld reproducibility consistency and quality, advanced adaptive control techniques are essential. These involve not only the development of adequate sensors for seam …
-
Construction engineering of steel tub-girder bridge systems for skew effects
… for use in curved bridges. The use on skewed support applications by bridge designers is limited as the behavior is complex and requires the use of advanced analysis tools. In consequence, a simplified analysis method to account for the effects of skew on tub-girder twist rotations and internal …
-
Flexible forming of 3-D metal panels
… such as distortion of sub-assemblies and poor fit-up during welding. Estimation of springback remains an important and challenging issue for the sheet metal industry. Based on the ABAQUS software, 3-D finite element models were generated, with the required constraints and boundary conditions …
-
Unbonded Monostrands for Camber Adjustment
Prestressed concrete structural members camber upwards or downwards depending upon the location of application of prestress force. Identical members do not camber equally due to variability of the factors influencing it. Differential camber in the beams, if significant, results in excessively tall …
-
Gas-metal reactions and porosity in the inert gas arc welding of copper
… its temperature, the hydrogen and oxygen being supplied by the dissociation of water vapour in the arc atmosphere. It has been shown conclusively that nitrogen porosity can occur in the tungsten inert gas arc welding of copper and that this porosity can be eliminated by using filler wires …
-
Field Monitoring and Evaluation of Curved Girder Bridges with Integral Abutments
… bridges due to unpredicted girder displacements, fit-up, and locked-in stresses. Nationally, up to one-quarter of steel girder bridges are being designed with horizontal curvature, an alarming figure when considering the unknown behaviors of this type of bridge. The primary objective of this work …
-
Experimental Testing, Subsystem Model Validation, and Design of a Variable Displacement Hydraulic Motor
… the primary focus. Losses were modeled and grouped into five primary sources: main taper roller bearings, case windage, shaft seal, valve actuation, and linkage. A staged-assembly method was developed that allowed individual loss components to be isolated and each model was validated …