Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 112 for “"Flame stability"”.

  1. Diffusion flame stability

    Thesis (Ph. D.)--Michigan State University. Department of Mathematics, 2006

    msu Repository record for Diffusion flame stability (opens in a new tab)

  2. Mechanisms of Flame Stability in Non-premixed High-speed Flows

    … focuses on advancing our understanding of flame stability in supersonic non-premixed flames by employing experimental data to develop a flame stability correlation parameter (SCP). Experimental data were acquired from a generalized supersonic cavity flameholder combustor equipped with …

    ucf Repository record for Mechanisms of Flame Stability in Non-premixed High-speed Flows (opens in a new tab)

  3. Flame stability and burner condition monitoring through optical sensing and digital imaging

    … of a prototype instrumentation system for flame stability and burner condition monitoring on fossil-fuel-fired furnaces. A review of methodologies and technologies for the monitoring of flame stability and burner condition is given, together with the discussions of existing problems and …

    kent Download PDF for Flame stability and burner condition monitoring through optical sensing and digital imaging (opens in a new tab)

  4. Investigation of the mechanism of premixed flame stability with particular reference to the effects of vitiation

    The blow-off stability limit has been determined at various mixture compositions of methane-air and ethylene-air systems. Primary or secondary or combined primary and secondary combustion air has been vitiated with various quantities of nitrogen, carbon dioxide or water vapour. Vitiation of …

    city-london Download PDF for Investigation of the mechanism of premixed flame stability with particular reference to the effects of vitiation (opens in a new tab)

  5. Effect of Blending on High-Pressure Laminar Flame Speed Measurements, Markstein Lengths, and Flame Stability of Hydrocarbons

    … the physical characteristics such as the laminar flame speed is necessary, especially at elevated pressures to have the most relevance to the gas turbine industry. This thesis discusses the equations governing premixed laminar flames, historical methods used to measure the laminar flame speed, the …

    tamu Repository record for Effect of Blending on High-Pressure Laminar Flame Speed Measurements, Markstein Lengths, and Flame Stability of Hydrocarbons (opens in a new tab)

  6. The Effect of Hydrogen Concentration on the Flame Stability and Laminar Burning Velocity of Hydrogen-Hydrocarbon-Carbon Dioxide Mixtures

    … to predict the laminar burring velocity and flame stability characteristics of the mixtures. These issues lead to the challenges on combustion performance and safe handling. The objectives of this study are to experimentally determine the effect of H2 and CO2 addition on the flame lift-off …

    whiterose Download PDF for The Effect of Hydrogen Concentration on the Flame Stability and Laminar Burning Velocity of Hydrogen-Hydrocarbon-Carbon Dioxide Mixtures (opens in a new tab)

  7. The role of physical and chemical properties of single and multicomponent liquid fuels on spray processes, flame stability, and emissions

    … chemical kinetics, on the combustion efficiency, stability, and emissions. This understanding is a key prerequisite to the development of fuel surrogates and the deployment of alternative jet fuels. Most of the surrogate formulation activities, especially with regard to aviation fuels, have …

    colostate Repository record for The role of physical and chemical properties of single and multicomponent liquid fuels on spray processes, flame stability, and emissions (opens in a new tab)

  8. Predicting Flame Stability, Ash Deposition And Radiative Heat Transfer Characteristics During Oxy-Fuel Combustion Of Pulverized Coal Using Different Multiphase Modeling Frameworks

    … by comparisons against measurements of: (1) flame stand-off, (2) temperature and velocity at different axial locations, (3) radiative heat transfer and (4) ash deposition rates of a nonswirling and a swirling oxy-coal flames (burning an Utah Bituminous and Sub-Bituminous coal, respectively) …

    nodak Repository record for Predicting Flame Stability, Ash Deposition And Radiative Heat Transfer Characteristics During Oxy-Fuel Combustion Of Pulverized Coal Using Different Multiphase Modeling Frameworks (opens in a new tab)

  9. Investigation of the effects of preheating on the characteristics of micro combustion

    … difficult for micro combustors to achieve wide flame stability, high combustion efficiency and clean combustion with low pressure loss, due to the associated downscaling problems, such as high heat loss ratio and small residence time. In order to overcome the issues associated with smaller …

    auckland-ms Repository record for Investigation of the effects of preheating on the characteristics of micro combustion (opens in a new tab)

  10. Instabilities of a rich premixed-flame

    <p>The instabilities of rich premixed-flames in a low-NO<sub>x</sub> burner operated with overfire air were experimentally investigated. Specifically, the effects of equivalence ratio and gas volumetric flowrate on the instabilities of the flame were examined. The transition from stability to …

    ut-knoxville Repository record for Instabilities of a rich premixed-flame (opens in a new tab)

  11. Oxy-combustion of High Water Content Fuels

    … the research focused on the investigation of the flame stability and characteristics for high water content fuels. My study has demonstrated the feasibility of burning fuels that have been heavily diluted with water in a swirl-stabilized burner. Ethanol and 1-propanol were first tested as the …

    wustl Repository record for Oxy-combustion of High Water Content Fuels (opens in a new tab)

  12. Investigating the Stability of the Blue Whirl

    … shells, revealed information about the flame’s structure, flow profile, and exhaust gas emissions and particulate. Additionally, several computational models produced results detailing flame structure and flow field. Questions regarding the impact of forced flow conditions and fuel type …

    maryland Repository record for Investigating the Stability of the Blue Whirl (opens in a new tab)

  13. On the stability of low-swirl non-premixed biogas flame: effects of burner geometry and oxygen enrichment

    … the stabilization of non-premixed biogas flames in a low-swirl burner, focusing on the combined effects of oxygen enrichment and burner geometry. Controlled experiments were performed using bluff-body (BB) and nonbluff- body burner configurations (NBB) with both ambient-air and …

    manitoba Repository record for On the stability of low-swirl non-premixed biogas flame: effects of burner geometry and oxygen enrichment (opens in a new tab)

  14. Combustion of Biogas in a Gas Turbine Simulation

    … dump combustor, emissions data and flame stability limitations were measured and analyzed.

    bucknell Repository record for Combustion of Biogas in a Gas Turbine Simulation (opens in a new tab)

  15. Measurement of Markstein numbers and laminar flame speeds in computationally simulated premixed cylindrically expanding laminar flames

    … Key combustion properties, such as laminar flame speed and Markstein number, play crucial roles in characterizing premixed flames. These parameters influence flame stability, speed, and response to perturbations. While these properties can be determined experimentally, such measurements are …

    texas Repository record for Measurement of Markstein numbers and laminar flame speeds in computationally simulated premixed cylindrically expanding laminar flames (opens in a new tab)

  16. High-pressure Soot Formation and Diffusion Flame Extinction Characteristics of Gaseous and Liquid Fuels

    High-pressure soot formation and flame stability characteristics were studied experimentally in laminar diffusion flames. For the former, radially resolved soot volume fraction and temperature profiles were measured in axisymmetric co-flow laminar diffusion flames of pre-vaporized n-heptane-air, …

    toronto-retro Repository record for High-pressure Soot Formation and Diffusion Flame Extinction Characteristics of Gaseous and Liquid Fuels (opens in a new tab)

  17. The blow-off of burner flames

    … is regarded as the primary variable controlling flame stability, and correlations have therefore been sought between burning velocity and blow-off flow rate. For this purpose, burning velocities have been determined by the cooled flat flame method, and blow-off flow rates have been measured for …

    salford

Page 1 of 6