Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 17 of 17 for “"Flat Band Potential"”.
-
Detection of oligonucleotide sequences on diazonium modified silicon substrates through electrical impedance measurements
… impedance shows a negative shift in the flat-band potential upon immobilization of the oligo probe layer following glutaraldehyde treatment. Upon hybridization with the complementary oligo-20mer sequence, a positive shift in the flat-band potential was observed. A comparison between the …
-
Myoglobin Detection on SiC: Immunosensor Development for Myocardial Infarction
… 3C-SiC is used as the active electrode and where flat band potential energy changes are monitored after successive modification of the SiC with aminopropyltriethoxysilane, anti-myoglobin and myoglobin incubation. We have studied the quality of self assembled monolayers obtained by surface …
-
DNA detection system of homo-oligomers by electrochemical impedence measurements and quantification through radiolabeling
… the complementary strands causes a shift in the flat band potential due to variations in charge accumulating at the modified oxide/electrolyte interface. With these measurements, we were able to make reliable comparisons between the electrical measurements and the quantification of immobilized …
-
The Application of Liquid Junctions for Characterization of Semiconductor Materials
… techniques provide information about the flat-band potential, doping density, Fermi level pinning, the density and distribution of surface states, energy gap and broadening parameter related to the lifetime of majority carriers, etc. The effective medium analysis of the frequency …
-
DNA immobilization onto electrochemically functionalized surfaces for direct detection of hybridization
… was found to increase with the number of cyclic potential scans in both aqueous and acetonitrile media. In acetonitrile the layer thickness, after a single cyclic scan, was determined to be approximately 15 nm whereas, after three cyclic scans, the layer thickness was found to be approximately 35 …
-
NiCeO[subscript x] OER co-catalyst on hematite photoanode for photoelectrochemical water oxidation
… an approximately 200 mV cathodic shift in onset potential and a ~53% enhancement in photocurrent at 1.23 V vs. RHE compared to its bare counterpart. Material characterization by electrochemical impedance spectroscopy revealed that the Ni species create a p-n junction across the space charge …
-
Synthesis and Characterization of Transition Metal Oxide Nanotubes for Photoelectrochemical Hydrogen Generation
… showed high photo conductivity and more negative flat band potential (-0.8 VAg/AgCl), which are the properties required for promising photo anode materials. Apart from the above work, mild steel which is 10 times less the cost of Ti is also being tested for its photoelectrochemical properties. …
-
Development of a stable sensing interface for an electrochemical impedance label-free DNA hybridisation biosensor
… to result in a positive shift in open circuit potential (OCP). This was attributed to the increase in upward band bending due to the extra negative charge from the DNA at the silicon-electrolyte interface, bringing the silicon electrode further into depletion. OCP results were supported by a …
-
Development of a photo redox flow battery based on nanostructured semiconducting metal oxides as photoanodes
… It resulted in a 2.3 µm thick film with a flat band potential of 0.39 V, an IPCE of 60 % and a separation efficiency of 34 % without using a cocatalyst. Subsequently, the formation of the WO₃/Mo:BiVO₄ heterostructure was analyzed in detail. The dip-coating parameters, the role of the …
-
Impedance-based detection of DNA sequences using a silicon transducer with PNA as the probe layer
… are significant shifts in the semiconductor's flat-band potential after immobilization and hybridization. The results obtained using this direct and rapid approach are supported by fluorescence measurements according to classical methods for the detection of nucleic acid sequences. One of the …
-
Engineering active sites in metal-organic frameworks for efficient electrochemical carbon dioxide reduction
… was developed and demonstrated lower overpotentials for the oxygen evolution reaction (OER) and significantly lower input costs compared to traditionally used platinum group metals. In addition to improving overall cell architecture, significant mechanistic studies were done to understand …
-
The electrochemistry of titanium corrosion
… of electrochemical experiments (open circuit potential, polarization, electrochemical impedance spectroscopy, coupled electrode crevice corrosion and combined electrochemistry/neutron reflectometry measurements) and post-electrochemistry, 'ex situ' analyses (X-ray photoelectron spectroscopy, …
-
An Investigation on the Band Gap and Band Edge of Semi-Conducting Lanthanum Transition Metal Perovskites for Photocatalytic Applications
… a vast majority other photocatalysts have large band gaps, and hence they find applicability only in the UV region of the solar spectrum. These large band gap photocatalysts suffer a severe limitation with regard to their overall process efficiency as the UV region contributes to about 3 to 4 % …
-
Seedless electroplating: adhesion and charge transfer in galvanic processes
… processes require mostly a simple constant potential. Despite, a semiconductor/electrolyte interface suffers enormous changes during the processes and different potentiostatic/galvanostatic techniques must be considered. Desired results (i.e. full metal coverage with a continuous layer) are …
-
Photoelectrical and photoelectrochemical characterization of the materials used in dye-sensitized and perovskite solar cells.
… in space charge density and a shift in the flat-band potential. Taken together, these results suggest that charge transfer from the REO neutralizes the deep trap states in the nanostructured titanium dioxide (NTD) film, decreasing charge scattering, and improving the NTD performance as an …
-
Characterization of type-II GaSb quantum rings in GaAs solar cells
… visible out towards 1.4 µm giving a near optimum band gap for concentrator solar cell applications. Also, in type II band alignment the electrons are weakly localized and the built in electric field drifts the electrons across the depletion region easily. However, the introduction of GaSb QRs in …
-
Φωτοηλεκτροχημεία ηλεκτροαποθεμάτων Cd(Zn)Se: παρασκευή και χαρακτηρισμός φωτο-ηλεκτροδίων TiO2/CdSe
… and the redox-electrolyte phases. Energy band diagram for each separate phase. Chapter I-2: Theoretical description of the semiconductor/electrolyte junction. Energy band diagrams and band-bending. Chapter I-3: The Photoelectrochemical Cell (PEC). Current–Potential characteristics and …