Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 135 for “"Flexural Properties"”.

  1. Flexural properties of hybridized unidirectional composites reinforced with bamboo and basalt fibers

    "In the present work, the flexural properties of hybridized composites with bamboo and basalt as reinforcing agents in an epoxy matrix (DGEBA + mPDA) are studied. Unidirectional composites with different weight ratio content of fibers were mechanically evaluated using three-point bending tests. The …

    msu

  2. Compressive and Flexural Properties of Porous Building Materials Created from Contaminated Waste Glass

    A new, energy efficient recycling technology is being developed that is compatible with post-consumer and post-industrial waste glass. This technology may be used to produce sustainable materials for the green building industry. During the process, materials are consolidated through cold isostatic …

    washington Repository record for Compressive and Flexural Properties of Porous Building Materials Created from Contaminated Waste Glass (opens in a new tab)

  3. FLEXURAL PROPERTIES OF PREMIUM VERSUS INEXPENSIVE NICKEL-TITANIUM ORTHODONTIC ARCHWIRES: AN IN VITRO COMPARISON

    ABSTRACT FLEXURAL PROPERTIES OF PREMIUM VERSUS INEXPENSIVE NICKEL-TITANIUM ORTHODONTIC ARCHWIRES: AN IN VITRO COMPARISON Cameron Young, D.D.S Marquette University, 2026 Objective: To analyze differences in flexural properties of thermal and superelastic nickel titanium wires by comparing premium …

    marquette Repository record for FLEXURAL PROPERTIES OF PREMIUM VERSUS INEXPENSIVE NICKEL-TITANIUM ORTHODONTIC ARCHWIRES: AN IN VITRO COMPARISON (opens in a new tab)

  4. Investigation of the flexural properties of reinforced concrete beams strengthened by externally bonded steel plates.

    … behaviour. The present study investigated the flexural behaviour of normal under- reinforced concrete beams with plate reinforcement bonded to their tensile face. Furthermore, long term studies of loaded and unloaded plated beams were initiated for testing after exposure to natural weathering …

    whiterose Download PDF for Investigation of the flexural properties of reinforced concrete beams strengthened by externally bonded steel plates. (opens in a new tab)

  5. Hygrothermal ageing and its effects on the flexural properties and failure modes of plant oil based composites for maritime applications

    … looks at moisture uptake and its effects on the flexural properties of glass reinforced epoxy, linseed oil and castor oil composites. Water uptake damages the material through chemical, physical and mechanical ageing. At the same time there is a need to reduce the environmental effects of the …

    soton Download PDF for Hygrothermal ageing and its effects on the flexural properties and failure modes of plant oil based composites for maritime applications (opens in a new tab)

  6. Flexural Analysis of 3D Printed Members

    Flexural analysis of a beam is the determination of the bending capacity of the beam when it is undergoing a load causing the beam to bend. 3D printed plastic beams have not been characterized and analyzed yet. However, this research characterizes 3D-printed PLA beams and provides projects for …

    sdstate Repository record for Flexural Analysis of 3D Printed Members (opens in a new tab)

  7. Effects of Friction Stir Welding on Polymer Microstructure

    … parameters and the resulting microstructural and flexural properties of the welded joint. A series of four single parameter experiments were run. The parameters investigated were pin diameter, feedrate, shoe temperature, and pressure time. Butt welds were made in 6 mm thick stress-relieved …

    byu Repository record for Effects of Friction Stir Welding on Polymer Microstructure (opens in a new tab) Download PDF for Effects of Friction Stir Welding on Polymer Microstructure (opens in a new tab)

  8. The flexural strength and stiffness of eastern oak pallet shook

    … conducted to provide information concerning the flexural behavior of oak pallet shook. This information is to be used in the development of a rational pallet design procedure. The investigation was designed to meet three basic objectives 1) to collect basic data concerning the flexural properties …

    vt Repository record for The flexural strength and stiffness of eastern oak pallet shook (opens in a new tab)

  9. Low-Shrinkage Fiber-Reinforced Concrete for Infrastructure Construction and Rehabilitation

    … to reduce shrinkage, enhance mechanical properties, and improve durability. The effect of fiber type (macro synthetic fiber, MSF; 5D steel fiber, 5D; 80% 3D + 20% short steel fibers; STST), SMMs, and plastic viscosity on bond strength and structural properties of beams was evaluated. Test …

    must-thes Repository record for Low-Shrinkage Fiber-Reinforced Concrete for Infrastructure Construction and Rehabilitation (opens in a new tab)

  10. Μελέτη της επίδρασης των ινών στη μηχανική συμπεριφορά του ινοπλισμένου σκυροδέματος

    … the enhancement and investigation of mechanical properties comprises an imperative need for the modern technological world, due to the increased demands of sophisticated and complex applications. For this reason, materials, such as concrete, that are widely used in construction are continuously …

    greece Repository record for Μελέτη της επίδρασης των ινών στη μηχανική συμπεριφορά του ινοπλισμένου σκυροδέματος (opens in a new tab)

  11. Modification of Fused Filament Fabrication Printer to Print High Temperature Thermoplastics to Improve Z-Strength

    … materials and improve the tensile and flexural properties. The FFF additive manufacturing (AM) process is inherently a non-isothermal thermoplastic welding process that leads to anisotropic material properties. A non-traditional method to improve the strength using an infrared quartz …

    texas-state Repository record for Modification of Fused Filament Fabrication Printer to Print High Temperature Thermoplastics to Improve Z-Strength (opens in a new tab)

  12. Toughening of carbon fiber-reinforced epoxy polymer composites via copolymers and graphene nano-platelets

    … without reducing other composite mechanical properties. The toughening of the base matrix material, DGEBA/mPDA, was accomplished by two methods: first, using low concentrations of aliphatic copolymers to enhance energy absorption and second by adding graphene nano-platelets (GnP) to act as …

    msu Repository record for Toughening of carbon fiber-reinforced epoxy polymer composites via copolymers and graphene nano-platelets (opens in a new tab)

  13. Flexural behavior of a glass fiber reinforced wood fiber composite

    The static and dynamic flexural properties of a wood fiber matrix internally reinforced with continuous glass fibers were investigated. When modelled as a sandwich composite, the static flexural modulus of elasticity (MOE) of glass fiber reinforced hardboard could be successfully predicted from the …

    vt Repository record for Flexural behavior of a glass fiber reinforced wood fiber composite (opens in a new tab)

  14. Fiber Orientation Effects on the Fracture and Flexural Toughness of Extruded Fiber Reinforced Concrete for Additive Manufacturing

    In this study, the mechanical properties of a fiber-reinforced cementitious composite (FRCC) were derived for specimens fabricated using two different methods of casting: conventional cast construction and pump-driven extrusion. Through the extrusion process, fibers are more likely to be oriented …

    vt Repository record for Fiber Orientation Effects on the Fracture and Flexural Toughness of Extruded Fiber Reinforced Concrete for Additive Manufacturing (opens in a new tab)

  15. Laboratory and Field Assessment of Chemically-Stabilized Subgrade Moduli under Compressive and Flexural Loading

    … as cement kiln dust (CKD) and lime, makes the flexural behavior of subgrades more dominant, compared to untreated subgrades. Consequently, it is important to consider the flexural behavior of a CSS layer in pavement design. In this study, the application of the Intelligent Compaction Analyzer …

    oklahoma-thes Repository record for Laboratory and Field Assessment of Chemically-Stabilized Subgrade Moduli under Compressive and Flexural Loading (opens in a new tab) Restricted access

Page 1 of 7