Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 61 for “"Flexural Test"”.

  1. Estudo da fadiga de duas misturas de solo-cimento

    This research work deals with repeated-load for flexural test and indirect tensile test, for two differents tipes of soil-cement: lateritic soil-cement mixture and saprolitic soil-cement mixture. Fatigue curves, in terms of stress, strain and stress level, were developed for the two stabilized …

    brazil-uerj Repository record for Estudo da fadiga de duas misturas de solo-cimento (opens in a new tab)

  2. Estudo do comportamento mecânico de estruturas de solo-cimento reforçado com fibras de coco e hastes de bambu

    … made and these were submitted to three point flexural test after 28 days of cure. In order to evaluate the effect of humidity, 1 specimen from each of the coconut fiber reinforced combination was immersed in water 24 hours prior to flexural test. The results of the tests carried out indicated …

    brazil-ufrn Repository record for Estudo do comportamento mecânico de estruturas de solo-cimento reforçado com fibras de coco e hastes de bambu (opens in a new tab)

  3. Modeling and evaluation of moisture diffusion in polymer composite materials

    … was assessed by conducting short beam shear test and flexural test at three immersion time points. In Part III, the effect of moisture on mechanical performance of PU sandwich composites was investigated. Mechanical property degradation due to moisture absorption was evaluated by conducting …

    must-thes Repository record for Modeling and evaluation of moisture diffusion in polymer composite materials (opens in a new tab)

  4. Analysis of Flexural Strength and Monotonic Load to Failure Following Simulated Chairside Adjustments and Repair in a Lithium Disilicate Glass-Ceramic

    … on the load to failure in a clinically relevant test. It is essential to find the ultimate treatment protocol which will help clinicians preserve the physical properties of the ceramic restoration after adjustment. Material and Methods: The total number of samples used in this study was 440 IPS …

    marquette Repository record for Analysis of Flexural Strength and Monotonic Load to Failure Following Simulated Chairside Adjustments and Repair in a Lithium Disilicate Glass-Ceramic (opens in a new tab)

  5. Interspecimen Study of Bone to Relate Macromechanical, Nanomechanical and Compositional Changes Across the Femoral Cortex of Bone

    … to investigate bone mechanics in more detail. Flexural test were done to classify the bones according to their strength and deflection. Raman spectroscopy analysis was done to map the mineralization, collagen crosslinking changes across the thickness of the bone. Nanoindentation was done to map …

    unt Repository record for Interspecimen Study of Bone to Relate Macromechanical, Nanomechanical and Compositional Changes Across the Femoral Cortex of Bone (opens in a new tab)

  6. Fibre reinforced seawater and sea-sand and concrete for marine structures

    … seawater and sea-sand. A series of experimental tests has been conducted and the results revealed that seawater sea-sand (SWSS) concrete has comparable properties to conventional concrete. Adding fibres significantly improved the tensile and flexural strengths, static and dynamic fracture …

    adelaide Repository record for Fibre reinforced seawater and sea-sand and concrete for marine structures (opens in a new tab)

  7. Static and cyclic loading effects on fracture toughness of contemporary CAD/CAM restorative materials

    OBJECTIVES: To test and compare the effects of static and cyclic loading on fracture toughness (K1C) and microhardness of dental restorative CAD/CAM materials. MATERIAL AND METHODS: Five commercially available CAD/CAM restorative materials were included in this study: Lava™ Ultimate Restorative (3M …

    bu Repository record for Static and cyclic loading effects on fracture toughness of contemporary CAD/CAM restorative materials (opens in a new tab)

  8. Effect of knitting and preforming parameters on mechanical properties of weft knitted glass/epoxy composites

    … in the wale direction using the tension test, compression test, flexural test, short beam shear test and Izod impact test. The results showed that the knitting and preforming parameters strongly influenced the mechanical properties of the weft knitted glass/epoxy composites.

    unsw Repository record for Effect of knitting and preforming parameters on mechanical properties of weft knitted glass/epoxy composites (opens in a new tab)

  9. Effect of fiber-matrix coupling on the mechanical properties of a totally bioabsorbable composite

    … than the untreated fiber composites. From the flexural test results it is suspected that the compression modulus is greater than tensile. The use of these innovative materials in fixation devices could eliminate a second surgery to retrieve the implant, eliminate the corrosion problems with …

    njit Repository record for Effect of fiber-matrix coupling on the mechanical properties of a totally bioabsorbable composite (opens in a new tab)

  10. Correlation of Tensile Strength to Flexural Rupture Modulus of GFRP Bars

    … quality is to perform a uniaxial, direct tensile test on GFRP bars. This test involves clamping the ends of the GFRP bar in a testing machine and pulling the bar apart with tensile force until failure. From this, the tensile stress and tensile elastic modulus of a GFRP bar can be obtained from the …

    waterloo Repository record for Correlation of Tensile Strength to Flexural Rupture Modulus of GFRP Bars (opens in a new tab)

  11. Jeffamine-epoxy Toughened Unsaturated Polyester, Interpenetrating Polymer Network (IPN)

    … for all IPNs using a three-point. bend flexural test. Material with the highest flexural modulus was that of linear diamine D-2000. Highest strength recorded for T-403 and D-2000 IPNs. SEM images showed T-509 with no scattered particles (l-20µm) suggesting good distribution of rubber …

    texas-state Repository record for Jeffamine-epoxy Toughened Unsaturated Polyester, Interpenetrating Polymer Network (IPN) (opens in a new tab)

  12. Metalização mecânica de ZrO2 com Ti para brasagem ZrO2/Aço com ligas de adição sem metal ativo

    … techniques, such as: x-ray diffraction, leak test, three-point flexural test and scanning electron microscopy with chemical analysis. The microstructural analysis revealed physical and chemical bonds in the metal/ceramic interfaces, providing superior leak proof joints and stress cracking, in …

    brazil-ufrn Repository record for Metalização mecânica de ZrO2 com Ti para brasagem ZrO2/Aço com ligas de adição sem metal ativo (opens in a new tab)

  13. Assessing the feasibility of yttria-stabilized zirconia in novel designs as mandibular anterior fixed lingual retention following orthodontic treatment.

    … standard C1161-13 and subjected to four-point flexural test to determine materials properties. Finite Element (FE) Analysis was employed to evaluate nine novel cross-sectional designs and compared to stainless steel wire. Each design was analyzed under the loading conditions to determine von …

    washington Repository record for Assessing the feasibility of yttria-stabilized zirconia in novel designs as mandibular anterior fixed lingual retention following orthodontic treatment. (opens in a new tab)

  14. Multilayered ceramic/metal composites by extrusion freeform fabrication

    … in notched four-point bend. For a short beam flexural test shear failure is more favorable in four-point than in three-point bending. In four-point tests, the shear stresses between the outer and inner loading pins can precipitate shear delamination prior to tensile cracking of the layers. …

    arizona-thes Repository record for Multilayered ceramic/metal composites by extrusion freeform fabrication (opens in a new tab)

  15. Detecting Delamination in Carbon Fiber Composites Using Piezoresistive Nanocomposites

    … nanocomposites due to the induced strain from flexural test (three point bend test) on delaminated and neat composite laminates are monitored to demonstrate the delamination detection and neat composite laminates are monitored to demonstrate the delamination detection method. A non-linear …

    embry-riddle Repository record for Detecting Delamination in Carbon Fiber Composites Using Piezoresistive Nanocomposites (opens in a new tab)

  16. Development of a new test procedure to evaluate the flexural strength of flexible base binder materials used in roadway construction

    … of Transportation depends on one primary test for the determination of the strength of the flexible base and subgrade roadway materials. The Triaxial Strength Test is generally accepted in all State Transportation Agencies for strength determination. However the Triaxial is known for being …

    ttu Repository record for Development of a new test procedure to evaluate the flexural strength of flexible base binder materials used in roadway construction (opens in a new tab)

  17. Mechanical Properties of 3D Printed Acrylonitrile Styrene Acrylate

    … used were 0⁰, +/-45⁰, and 90⁰. To perform the tests, MTS Universal Testing Machines were used along with Digital Image Correlation (DIC) to measure strain. DIC was incorporated to replace the use of strain gauge in the sample to find poisons ratio of the material. The results showed that raster …

    sdstate Repository record for Mechanical Properties of 3D Printed Acrylonitrile Styrene Acrylate (opens in a new tab)

  18. Estudo da resistência residual de compósitos poliméricos de fibra de vidro-e e kevlar 49 após sofrerem impacto de baixa velocidade

    … of the residual resistance to three-point flexural test and compression after impact (CAI), in two types of composite laminates of orthophthalic polymeric matrix, being one of them reinforced with 7 layers of E-Glass bidirectional tissue (CV) and the other reinforced with 7 layers of Kevlar …

    brazil-ufrn Repository record for Estudo da resistência residual de compósitos poliméricos de fibra de vidro-e e kevlar 49 após sofrerem impacto de baixa velocidade (opens in a new tab)

  19. ABA and ABC type thermoplastic elastomer toughening of epoxy matrices and its effect on carbon fiber reinforced composites

    … characterized by TGA, DMA, SEM and impact. The flexural modulus, flexural strength and thermal resistance remained unaffected up to 5 wt% loading of TPEs, and exhibited less than 10% decrease at higher weight percent. Tg was unaffected for all concentrations. Fracture toughness was improved …

    msu

  20. Adhesion energy measurements for silver films on alumina using micro-cold spray

    … adhesion of films that include the tape test where adhesives of different strengths are applied to the surface and then peeled off to determine the relative adhesion of the film to the substrate. This thesis is focused on the development of a sandwich specimen geometry to enable a …

    texas Repository record for Adhesion energy measurements for silver films on alumina using micro-cold spray (opens in a new tab)

Page 1 of 4