Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"Flexural Yielding"”.
-
Development of a Flexural Yielding Energy Dissipation Device for Controlled Rocking Masonry Walls
Steel flexural yielding arms can be an effective energy dissipation device for several seismic force resisting systems, including controlled rocking masonry walls. In controlled rocking masonry walls, uplift of the wall from the foundation is allowed in a way that can localize damage and minimize …
-
Behaviour of Shear-critical Reinforced Concrete Beams Retrofitted with Externally Applied Fibre-reinforced Polymers
… cyclic loading prior to the occurrence of flexural yielding. The shear resistance attributed to concrete was found to remain relatively consistent with reversed cyclic loading prior to flexural yielding, after which point concrete strength decay was apparent. The loss of concrete shear …
-
Elastic And Inelastic Stability Of Two-Panel Tiered Concentrically Braced Frames
… differential tier drifts resulting in weak-axis flexural yielding have on the strong-axis buckling strength of columns in a four-tier concentrically braced frame. A three-dimensional finite element analysis was used to impart varying levels of weak-axis flexural yielding onto various wide flange …
-
Experimental investigation of the response of reinforced concrete structural walls subjected to static and dynamic loading
… that are susceptible to shear failure after flexural yielding. The investigation was divided into an experimental and an analytical phase. There were three main objectives in the experimental phase: to study the potential discrepancies between static and dynamic wall response, to examine the …
-
Structural Behaviour of Shape Optimized Fabric Formed Reinforced Concrete Beams
… bottom flange and web. These beams all reached flexural yielding except for the prismatic I-beam which failed in shear within 1% of the flexural yielding load. The tapered beams achieved a higher load carrying capacity compared to the rectangular control beam, although they exhibited little to …
-
DEVELOPMENT OF A NOVEL SEISMIC FORCE RESISTING SYSTEM: CONTROLLED ROCKING MASONRY WALLS WITH ENERGY DISSIPATION ACCESSIBLE CONSTRUCTED ATOP A STEEL BASE
… within the system, typically in the form of yielding of bonded reinforcement within the wall. While this is effective at dissipating energy, it comes at the expense of signi ficant damage in the plastic hinge region, as well as substantial residual deformations. This results in costly repairs …
-
Topology Optimization of Steel Shear Fuses to Resist Buckling
… that dissipate energy through localized shear or flexural yielding mechanisms. Although previous studies have reported that fuses with specific geometry can develop a stable hysteretic behavior, their small thickness makes them prone to buckling, reducing strength and energy dissipation capacity. …
-
Web strength of rolled steel joists
… considered, overall elastic buckling of the web, flexural yielding of the web due to large out of plane deflexions and local crushing of the material at the junction of the web and the root fillets. Each mode is considered theoretically and developed to establish the main variables, thus enabling …
-
Cast Steel Yielding Brace System for Concentrically Braced Frames
… resistant steel brace connector called the Yielding Brace System (YBS) that improves the earthquake performance of steel braced frame buildings. The connector is comprised of two steel castings which dissipate seismic energy through flexural yielding of specially designed triangular yielding …
-
Evaluating Shear links for Use in Seismic Structural Fuses
… for structural shear links to address shear yielding, flexural yielding and buckling limit states for a typical link subjected to shear loading to promote ductile deformation modes. The buckling resistant design of the links is described with the aid of differential equations governing the …
-
Collapse assessment of concrete buildings : an application to non-ductile reinforced concrete moment frames
… of shear resistance, either before or after flexural yielding. The robust collapse performance assessment could be used for many structural applications. In this dissertation, it is used to identify collapse indicators, design and response parameters that are correlated with “elevated” …
-
Behaviour and design of earthquake resistant low-rise shear walls.
… indicated that both walls were able to develop flexural yielding and failed in crushing of diagonal struts. Little or no strength decay was observed up to approximately 0.92% and 1.83% lateral drift in walls with aspect ratios of 0.75 and 1.0, respectively. Shear sliding was limited to …
-
Ductility of Reinforced Concrete Masonry Shear Walls
… can be achieved through the development of a flexural plastic hinge at the base characterized by yielding of the vertical reinforcement. The length of the plastic hinge and the ultimate curvatures within this region are the essential parameters affecting the ductility and ultimate …
-
Computational and Experimental Investigation of Seismic Structural Fuse Shapes for Structural Systems
… In most cases, the links are designed to undergo flexural yielding as it is believed to exhibit more ductility than other limit states. However, computational and experimental studies on the shear yielding limit state are limited. Additionally, the transition between shear dominated and flexural …
-
Modelling the Post-Peak Response of Existing Reinforced Concrete Frame Structures Subjected to Seismic Loading
… and combining it with displacements arising from flexural and bond-slip deformations to get the full lateral force-lateral displacement response. It accounts for the interaction between flexural and shear deformations inside the potential plastic hinges, the distribution of flexural and shear …
-
Seismic Design Of Pipe-Pin Connections In Concrete Bridges
… (2) six pure shear specimens to determine the yielding and ultimate shear capacities, and (3) a two-column 0.2-scale bridge pier model incorporating pipe-pin hinges that were designed based on the proposed guideline. The pier model was used to evaluate the new design method under earthquake …
-
Coupled Thermo-Structural Analysis of Steel Reinforced Geopolymer Concrete Structural Members
This thesis investigates the coupled thermal, flexural and steel–concrete bond response of steel-reinforced geopolymer concrete (GPC) and ordinary Portland cement concrete (OPCC) beam cross-sections subjected to one-sided standard fire exposure. A sequential analytical framework is developed to …
-
Seismic Performance of Steel Buildings with Braced Dual Configuration and Traditional Frame Systems through Nonlinear Collapse Simulations
… moment frame acting as a backup system with good flexural behavior is the steel Braced Dual System studied herein. The objectives of this study are: a) to investigate the seismic response of steel Braced Dual building from yielding to failure, as well as, to identify the types of failure …
-
Multi-Hazard In-Plane Response of Steel-plate Composite (SC) Walls: Out-of-plane and Accident Thermal Loadings
… nominal shear strength (per US codes) develop flexural yielding and failure due to interaction between the in-plane and out-of-plane moments. Shear failure does not occur for these wall piers. The wall pier specimen subjected to an out-of-plane shear force that is 2.5 times the nominal shear …
-
HIGH-STRENGTH STEEL BARS IN EARTHQUAKE-RESISTANT T-SHAPED CONCRETE WALLS
… high-strength Grade 100 (690) reinforcement. The flexural reinforcement consisted of No. 6 (19) bars inside confined boundary elements and No. 4 (13) bars elsewhere. Confining reinforcement in boundary elements consisted of No. 3 (10) hoops and crossties of the same grade as the flexural …
Page 1 of 2