Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 980 for “"Flexural strength"”.

  1. Flexural Strength of Orthodontic Cement containing Microcapsules

    … demonstrate the effect of microcapsules on the flexural strength of orthodontic resin cement formulations. Microcapsules demonstrate a slow, controlled release of fluoride, calcium, and phosphate ions. Orthodontic resin cements that contained microcapsules were incorporated into formulations at …

    creighton Repository record for Flexural Strength of Orthodontic Cement containing Microcapsules (opens in a new tab)

  2. Flexural strength and ductility of high performance steel girders

    The flexural strength and ductility of steel girders is dependent upon many factors including cross sectional parameters, loading condition, and cross bracing. These effects are investigated for bridge girders made of high performance steel through the use of experimental testing and non-linear …

    nebraska Repository record for Flexural strength and ductility of high performance steel girders (opens in a new tab)

  3. Vibration and Flexural Strength Characteristics of Composite Castellated Beams

    … was the focus of this study. The vibration and flexural strength performance were verified in this paper. The vibration characteristics of castellated beams were examined using experimental and analytical test methods. The effective moment of inertia is essential to accurately predict the …

    vt Repository record for Vibration and Flexural Strength Characteristics of Composite Castellated Beams (opens in a new tab)

  4. Comparing flexural strength of acrylic processed by three different techniques

    … acrylic resin fractures due to poor flexural strength has historical been a problem with complete denture.;Objective: The purpose of this in vitro study was to measure and compare the flexural strength of denture base acrylic resin processed by three different techniques: Conventional …

    wvu Repository record for Comparing flexural strength of acrylic processed by three different techniques (opens in a new tab)

  5. Flexural Strength of a Pit and Fissure Sealant Containing Microcapsules

    … study the effect that microcapsules have on the flexural strength of pit and fissure sealant formulations. Pit and fissure sealants that contained microcapsules were incorporated into formulations at 5 w/w% of microcapsules (2 w/w% of 5.0 M Ca(NO3)2; 2 w/w% of 0.8 M NaF; 1 w/w% of 3.0 M K2HPO4) …

    creighton Repository record for Flexural Strength of a Pit and Fissure Sealant Containing Microcapsules (opens in a new tab)

  6. Flexural Strength of SLA 3D-Printed and Conventional Interim Materials

    Objective: This study compared the flexural strength and flexural modulus of interim resin bars fabricated with a 3D printable resin (C&B resin, Formlabs), a CAD PMMA disk (Telio CAD, Ivoclar Vivadent), a conventional PMMA resin (Telio Lab, Ivoclar Vivadent), and a Bis-acryl resin (TempSmart, GC …

    buffalo Repository record for Flexural Strength of SLA 3D-Printed and Conventional Interim Materials (opens in a new tab)

  7. Flexural Strength Reliability of Visually Graded Southern Pine Dimensional Lumber

    … Southern Pine might not meet the minimum target flexural reliability speculated in the design code. The main goal of this study was to assess the reliability of flexural members constructed using visually graded Southern Pine lumber and designed using the 2005 NDS design values to determine if …

    clemson Repository record for Flexural Strength Reliability of Visually Graded Southern Pine Dimensional Lumber (opens in a new tab)

  8. The flexural strength and stiffness of eastern oak pallet shook

    … conducted to provide information concerning the flexural behavior of oak pallet shook. This information is to be used in the development of a rational pallet design procedure. The investigation was designed to meet three basic objectives 1) to collect basic data concerning the flexural properties …

    vt Repository record for The flexural strength and stiffness of eastern oak pallet shook (opens in a new tab)

  9. Improving the Flexural Strength of Bowed Marble Panels through Mechanical Treatment

    … presented investigated methods to stabilize and strengthen deformed marble panels where preservation of existing historic fabric is the preferred mode of treatment. Through an examination of the literature of the mechanical reinforcement of concrete slabs and masonry panels, a method to improve …

    penn Repository record for Improving the Flexural Strength of Bowed Marble Panels through Mechanical Treatment (opens in a new tab)

  10. Flexural Strength of Orthodontic Sealant Containing Low Stress Monomers and Microcapsules

    … to be Bis-GMA free. This study examines the flexural strength of these formulations and explores the effects of different variables on mechanical properties. The variables include: the type of low stress monomer in the continuous phase, the ratio within the continuous phase, the amount of …

    creighton Repository record for Flexural Strength of Orthodontic Sealant Containing Low Stress Monomers and Microcapsules (opens in a new tab)

  11. Colloidal Stability, Rheology, and Flexural Strength of Antiviral 3D Printable Colloids

    … 10 w/w%) on colloidal stability, viscosity, and flexural strength. Methods: Colloids consisting of five different antiviral fillers [BIOSAFE Glass and 4 different ion-releasing zeolites (Ag only, Cu only, Ag/Cu, and Ag/Zn)] were formulated with varied amounts of FS in a 3D printable resin. Flow …

    creighton Repository record for Colloidal Stability, Rheology, and Flexural Strength of Antiviral 3D Printable Colloids (opens in a new tab)

  12. The Compressive And Flexural Strength Of Concrete Containing Recycled Waste Plastic

    … of this strategy by testing the compressive and flexural strengths of hardened concrete specimens containing varying percent of plastic aggregates used as partial replacement for fine aggregates. The compressive strength of specimens of 1:3:3 (cement:sand:gravel) concrete mixes containing 10%, …

    kennesaw Repository record for The Compressive And Flexural Strength Of Concrete Containing Recycled Waste Plastic (opens in a new tab)

  13. Evaluation of flexural strength of multilayer zirconia under three loading configurations

    OBJECTIVE: Flexural strength values of multilayer zirconia may vary depending upon the specimen dimension, layers distribution, especially the layer in maximum tension side, i.e., loading configuration. Although the previous studies have examined flexural strength of the separate layers in one …

    bu Repository record for Evaluation of flexural strength of multilayer zirconia under three loading configurations (opens in a new tab)

  14. Flexural strength comparison of monolayer resin composite to bilayer resin/ liner composite

    … The aim of this study was to compare the flexural strength of a monolayer of resin composite with that of a bilayer of resin composite and liner. Four types of RC beams were tested: a monolayer control that is an un-lined RC (Tetric EvoCeram, Ivoclar Vivadent) and three “bilayer” specimens …

    iupui Repository record for Flexural strength comparison of monolayer resin composite to bilayer resin/ liner composite (opens in a new tab)

  15. Determining the flexural strength of asphalt mixtures using the Bending Beam Rheometer.

    Asphalt mixture creep stiffness and strength are needed in the AASHTO Mechanistic Empirical Pavement Design Guide low temperature algorithm to predict low temperature performance. A procedure for obtaining creep stiffness by testing thin mixture beams using a Bending Beam Rheometer was previously …

    umn Repository record for Determining the flexural strength of asphalt mixtures using the Bending Beam Rheometer. (opens in a new tab)

  16. The effects of machining on the flexural strength of CAD-CAM materials

    … the effects of different machining modes on the flexural strength CAD-CAM restorative materials. MATERIALS AND METHODS: Four different CAD-CAM materials were used: VITA MARKII, VITA Enamic (VITA Zahnfabrik), Empress CAD, and e.max CAD (Ivoclar Vivadent). Rectangular bars for each material (except …

    bu Repository record for The effects of machining on the flexural strength of CAD-CAM materials (opens in a new tab)

  17. Flexural strength of reinforced concrete beams strengthened using carbon fibre reinforced composite sheets

    … tension face of concrete beams is an effective strengthening method to increase the flexural load capacity and the stiffness. The strengthening mechanism relies on composite action between the concrete and the laminate. If composite action is not fully achieved, the strengthening effect will not …

    soton Download PDF for Flexural strength of reinforced concrete beams strengthened using carbon fibre reinforced composite sheets (opens in a new tab)

Page 1 of 49