Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 267 for “"Flight Testing"”.
-
Flight Testing Small, Electric Powered Unmanned Aerial Vehicles
Flight testing methods are developed to find the drag polar for small UAVs powered by electric motors with fixed-pitch propellers. Wind tunnel testing was used to characterize the propeller-motor efficiency. The drag polar was constructed using data from flight tests. The proposed methods were …
-
Flight Testing Small UAVs for Aerodynamic Parameter Estimation
A flight data acquisition system was developed to aid unmanned vehicle designers in verifying the vehicle's design performance. The system is reconfigurable and allows the designer to choose the correct combination of complexity, risk, and cost for a given flight test. The designer can also …
-
Shortening uncrewed aircraft development cycles via automated flight testing
Aircraft flight testing is generally a long, laborious task and understanding parameters of an aircraft, such as its drag coefficients, is an important outcome and a key aspect for performance modelling and mission planning. The present project developed an automated flight-testing capability that …
-
NPS Terahertz project: IR HAB flight testing and integration
… camera integrated on high-altitude balloon (HAB) flights. The objective of this thesis is to study the integration concerns in order to evaluate possibilities and suggest appropriate configurations. This study provided relevant knowledge about a Raspberry Pi–controlled command and data handling …
-
Flight testing of a half-scale remotely piloted vehicle.
Flight testing of a half-scale Pioneer remotely piloted vehicle was conducted to determine the longitudinal static stability flying qualities. A pulsewidth modulated telemetry system was used to provide data on control surface deflections, angle of attack, sideslip angle and airspeed. From the …
-
Flight Testing of Cell Network-Based Navigation for sUAS
… aspects of the functioning of cellular networks. Flight testing was conducted to investigate the feasibility of using the system for autonomous navigation. This did not produce a positive result, in part due to inaccuracy associated with the model used to relate power received to distance form a …
-
Gyroplane handling qualities assessment using flight testing and simulation techniques
… qualities increase mission effectiveness and flight safety, and reduce pilot workload. This dissertation provides results of an assessment of gyroplane handling qualities using flight testing and simulation techniques. Since at the time of writing, there are no direct handling qualities …
-
Development and Flight Testing of a 25-Kilogram Quad-Cyclocopter
… thesis describes the design, development, and flight testing of a quad-cyclocopter weighing 25 kilograms and 1.8 m x 1.4 m x 0.8 m in dimension. This cyclocopter features four cantilevered cyclorotors with a unique five-bar blade pitching mechanism. The cyclorotor design is chosen through …
-
Design, optimization and flight testing of a micro air vehicle
… A detailed description of the manufacture and testing of the prototype is also included in this thesis.
-
NPS Solar Cell Array Tester CubeSat flight testing and integration
… CubeSat missions. This thesis documents the pre-flight NPS-SCAT battery analysis, power budget, vibration analysis, beacon antenna integration evaluation, and conformal coat study. Some data from the flight is presented, which validates the pre-flight power budget analysis.
-
Developmental flight testing of a half scale unmanned air vehicle
This thesis sought to perform developmental flight testing of a half- scale unmanned air vehicle. To do this the half scale version of the Pioneer (used by the US Marine Corps for training) was chosen as the airframe to instrument because of problems that the Unmanned Air Vehicle Office at the …
-
Numerical Flight Testing of a Tube-launched Transformable Micro Air Vehicle
… the MAV was designed to transform from ballistic flight to aircraft flight for the purpose of gaining performance improvements in both range and accuracy. This new MAV design consists of a two-stage deployment process of its control surfaces in which the tail fins are first deployed immediately …
-
Virtual Flight Testing in a Wind Tunnel Using a Manoeuvre Rig
… phenomena, and 3) to physically simulate free-flight manoeuvres. The first two objectives have been explored previously and results have been published. This thesis will focus primarily on the third objective of true physical free-flight simulation on the manoeuvre rig. This aspect is initially …
-
Development of onboard data acquisition for unmanned air vehicle flight testing
… investigations, providing dynamic flight measurements not available in wind tunnels. A 1/8 geometrically scaled F-16A was constructed and test flown in order to provide a proven, highly maneuverable of airspeed, angle of attack, sideslip angle, and control surface deflection. A …
-
Study of Rubber Damped Skin Friction Gages for Transonic Flight Testing
… for application in 3D, unsteady, transonic flight conditions. Design conditions required optimum gage performance at altitudes ranging from 15,000 to 45,000 feet, Mach numbers ranging from 0.6 to 0.99 resulting in shear values of 0.3 to 1.5 psf. under vibration conditions up to 8.0 grms over …
-
The Development and Flight Testing of an Aerially Deployed Unmanned Aerial System
… The investigation included the development and flight testing of multiple unmanned aerial systems to investigate the different components of potential aerial deployment missions. The project consisted of two main objectives; the first objective dealt with the development of an airframe capable …
-
Flight testing of a remotely piloted vehicle for aircraft parameter estimation purposes
… be built, tested, and successfully used for flight testing and parameter estimation purposes, in an academic setting. This was a fundamental step towards the creation of an automated Unmanned Aerial Vehicle (UAV). This research project was divided into four phases. Phase one involved the …
-
Wind Tunnel and Flight Testing of Active Flow Control on a UAV
… in wind tunnel studies but successful in-flight implementation of an active flow control technology still remains a challenge. This thesis presents implementation of active flow control technology onboard a 33% scale Extra 330S ARF aircraft, wind tunnel studies and flight testing of …
-
Design, Construction and Flight testing of a Long Endurance Fixed Wing UAV
This thesis outlines the design process and feasibility analysis of a long-endurance, fixed-wing UAV developed at Chalmers University of Technology. The project aims to deliver a cost effective, electrically powered platform for aerial data collection while minimising the logistical challenges of …
Page 1 of 14