Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 25 for “"Flip chip assembly"”.
-
Flip-chip Assembly and Reliability Testing
This thesis investigates the assembly and reliability processes of two different flip chip technologies, C4 solder bumps and gold stud bumps. The thesis mainly focuses on how underfill affects the mechanical and electrical reliability of the flip chip assemblies when going through temperature …
-
Fundamental study of underfill void formation in flip chip assembly
Flip Chip in Package (FCIP) has been developed to achieve the assembly process with area array interconnects. Particularly, a high I/O count coupled with finer pitch area array interconnects structured FCIP can be achieved using no-flow underfill assembly process. Using the assembly process, a …
-
Study of the time-dependent rheological behaviour of lead-free solder pastes and flux mediums used for flip-chip assembly applications
… soldering of surface mount devices. Successful assembly of electronic devices for ultra-fine pitch and flip-chip applications requires the deposition of small and consistent paste deposits from pad to pad, and from board to board. The paste printing process at this chip-scale geometry depends on …
-
Modelling and computer simulation of the behaviour of solder paste in stencil printing for surface mount assembly
… for ultra-fine pitch surface mount and flip-chip assembly is the difficulty inachieving consistent paste deposit volumes from pad-to-pad. At the very small aperturegeometries required for ultra-fine pitch and flip chip assembly, flow properties of thepaste becomes one of the dominant …
-
Experimental and theoretical assessment of thin glass panels as interposers for microelectronic packages
… substrates of 25 x 25 mm and a 10 x 10 mm flip chip with a solder bump pitch of 75 um is then reflow attached to the glass substrate followed by underfill dispensing and curing. The warpage of the flip-chip assembly is measured. In parallel to the experiments, numerical models have been …
-
Characterisation of lead-free solder pastes and their correlation with the stencil printing process performance
… of lead-free soldering in the SMA (surface mount assembly) process, and an urgent need for better understanding of the characteristics and printing performance of new solder paste formulations. Equally, as the miniaturisation of hand-held and consumer electronic products continues apace, the …
-
Integrated Input/Output Interconnection and Packaging for GSI
… to eliminate the need for underfill between a Si chip and organic packaging substrate. Wafer-level packaging with the compliant interconnects can largely reduce the impact on the fragile low-k interlevel dielectric (ILD) films. The technology feasibility of the SoL MEMS I/O interconnects is …
-
Superconducting flux transformers for the modulation of flux-tunable resonators
… yield of superconducting flux transformer and flip-chip devices. A novel flip-chip assembly technique was implemented with usage of Indium microspheres as superconducting interconnects. The thin-film of the materials used for the flux transformer and the flip-chip devices were characterized to …
-
Design, Modeling, and Testing of High Performance RF Bistable Magnetic Actuators
… processes including a two-substrate flip-chip assembly, multilevel metallization, and sublimation release to avoid stiction. The actuator was found to have excellent correspondence between observed and modeled behavior. The benefits of shape anisotropy are quantified. Lithographic …
-
Study of Interfacial Crack Propagation in Flip Chip Assemblies with Nano-filled Underfill Materials
… pads during solder reflow, and therefore, the assembly yield would be adversely affected. The use of nano-sized filler particles can potentially improve assembly yield while offering the advantages associated with filled underfill materials. The objective of this thesis is to study the …
-
A fully-integrated complementary metal-oxide semiconductor receiver with avalanche photodetector
… metal-oxide-semiconductor (CMOS) RX or flip-chip assembly results in several issues – increase in manufacturing and packaging cost, possible decrease in yield, additional packaging parasitics degrading the sensitivity of the RX, crosstalk between the bondwires degrading RX performance, …
-
Effect of intermetallic compounds on thermomechanical reliability of lead-free solder interconnects for flip-chips
… assembled on the printed wiring board (PWB). Flip-Chip on board (FCOB) emerges as a viable solution which meets the industry requirements of (i) increased I/O, (ii) increased functionality and (iii) improved performance at lower costs. Nevertheless flip-chip on board (FCOB) reliability …
Page 1 of 2