Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 35 for “"Floor Accelerations"”.
-
Assessment of Floor Accelerations in Yielding Buildings
… analysis method is employed to evaluate the floor response of inelastic steel moment frame buildings subjected to all three components of a suite of 21 ground motions. To better understand the acceleration demands on nonstructural components, this study focuses on the influence of structural …
-
Classifying Floor Accelerations for Gait Estimation and Detection
… speed estimator from acceleration signals of floor vibrations.The proposed classifier can detect gait events and perform gait speed estimations using a Bayesian framework. The first step to identify gait parameters from floor vibrations is to determine if the acceleration records were induced …
-
Evaluation of floor accelerations and spectra in linear and nonlinear regular RC frame buildings
… (Ax), component amplification factor (Ar), and floor response spectra (FRS) are generated by performing linear and nonlinear dynamic analysis, and applying the simplified method of Kothari et al. (2017), using SAP2000® software. The obtained factors Ax and Ar are compared to the ones proposed by …
-
Evaluation of vertical ground and floor accelerations and spectra in elastic RC frame buildings located in Eastern Canada
… of the slab on the vertical response of the floor system, including different locations within the floor and along the building height on the amplification of vertical peak floor accelerations and floor spectral accelerations was assessed. To this end, four 3-D elastic regular RC …
-
Application of Base Isolation Systems to Reinforced Concrete Frame Buildings
… of lateral inter-storey drifts, peak absolute floor accelerations, and residual drifts. The laminated rubber bearings, the high damping isolation devices, composed of rubber bearings and viscous dampers, and the hybrid isolation system of rubber bearings and friction pendulum bearings were …
-
Stability-dependent Mass Isolation for Steel Buildings
… accompanied by average reductions in the floor accelerations of ca. 70% when compared to those developed by typical braced-frame structures. Since the SDMI system is to be used in conjunction with viscous energy dissi-paters, the analytical testing program is also used to determine the …
-
Rocking Response of Slender Freestanding Building Contents in Fixed-Base and Base-Isolated Buildings
… of the most damaging response modes due to large accelerations at impact and the possibility of toppling. This study investigates the rocking response of contents within fixed-base and base-isolated buildings so that better-informed decisions can be made, either at the design stage for new …
-
Seismic Performance Comparison of a Fixed-Base Versus a Base-Isolated Office Building
… conducted in PERFORM-3D to obtain the related floor accelerations and interstory drifts. Finally, in the performance assessment phase, probable damage costs are computed using fragility curves and FEMA P-58 methodology in PACT. Damage costs are computed for each building and seismic demand …
-
Seismic Response Analysis of a Full-Scale Base-Isolated Structure via Measurements and Modeling
… from sparse seismic-response measurements of floor accelerations. The method requires only direct matrix calculations (factorizations and multiplications); no iterative trial-and-error methods are required. The method requires a mass matrix, or at least an estimate of the floor masses. A …
-
Seismic performance and fragility assessment of ductile light non-structural components in nonlinear structures: from peak demand factors to loss estimation
… These results indicate 40–60% reductions in peak floor acceleration, velocity, and displacement demands when NSC ductility increases from μ = 1.0 to μ ≈ 2.0 under resonant conditions. In the second step, Incremental Dynamic Analysis (IDA) is employed to quantify the combined effects of structural …
-
Control of smart base isolated buildings with new semiactive devices and novel H2/LQG, H-infinity and time-frequency controllers
… smooth and do not cause sharp increases in floor accelerations or interstory drifts, while achieving reductions in base displacements. The newly developed semiactive devices and control algorithms are implemented in linear and nonlinear multi degree of freedom two and three dimensional smart …
-
UNDERSTANDING AND IMPROVING THE DYNAMIC PERFORMANCE OF THE STRONGBACK STRUCTURAL SYSTEM
… joint to reduce internal force demands and floor accelerations in taller buildings, with particular focus on the role of joint stiffness. Finally, the research investigates the integration of inerters—devices that generate force proportional to relative acceleration—both as standalone …
-
Experimental Seismic Evaluation of Ceiling-Piping-Partition Nonstructural Systems
… into two configurations, one to produce large floor accelerations and the other to produce large inter-story drifts, affecting both acceleration and drift sensitive nonstructural systems. The responses and behaviors of ceiling-piping-partition systems were critically assessed through several …
-
NONSTRUCTURAL COMPONENT DEMANDS IN BUILDINGS WITH CONTROLLED ROCKING STEEL BRACED FRAMES
… a cascading analysis approach where absolute floor accelerations generated from nonlinear time-history analyses of each structural system are used as input for computing the responses of nonstructural components. The results show that the trade-off of maintaining elastic behaviour of the CRSBF …
-
Investigating Substructure Flexibility in Column-Top Isolation Systems with Elastomeric Bearings
… significant reductions in interstory drifts and floor accelerations. Yielding was observed throughout the original frame under maximum considered earthquakes, while the retrofit frame remained elastic.
-
Analytical Seismic Performance Assessment of Braced Timber Frames with Shape Memory Alloy Fasteners
… by approximately 90% in both prototypes. Peak floor accelerations decreased by 3-13% with SMA connections. These findings confirm that SMA dowels effectively improve post-earthquake performance without compromising structural strength. This will guide future code developments and research …
-
Placement of fluid viscous dampers to reduce total-building seismic damage
… (FVDs) can improve interstorey drifts and floor accelerations, parameters which characterise seismic demands. The distribution of dampers within a building and the amount of supplemental damping are critical decisions. Many placement methods have been proposed, however no conclusive optimal …
-
Wall-to-floor Interactions in Low-damage Concrete Buildings
… future earthquakes. In this thesis, the wall-to-floor interactions of low-damage concrete buildings were experimentally and analytically studied. A collaborative shake-table test on a 2-storey low-damage concrete wall building was completed by the New Zealand Centre for Earthquake Resilience …
-
Base Isolation of a Chilean Masonry House: A Comparative Study
… this study is to reduce the interstory drifts, floor accelerations, and shear forces experienced by masonry houses subject to seismic excitation. Ambient vibration testing was performed on a case study structure in Maip�, Chile, to identify characteristics of the system. Upon creating a multiple …
-
Development and Testing of New Ring Spring Self-Centering Energy Dissipative (RS-SCED) Braces for Seismic Resilience of Buildings and Bridges
… the peak storey drifts, residual drift and floor accelerations.
Page 1 of 2