Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 425 for “"Flow Measurement"”.
-
Thermal mass flow measurement
… static model for a capillary type thermal massflow sensor for gases. Using such a sensor, a meter is constructed which measures gas mass flow by means of a bypass arrangement which ensures a constant flow ratio between the sensor and the meters’ mam flow element. The model equations are derived …
-
Rotating Vane Flow Measurement Techniques
… into the development and performance of vane flowmeter methods for the measurement of air and gas flow. To improve on existing rotating vane anemometer performance, a capacitance change vane sensing technique is investigated. In conjunction with Ower's dynamic equations steady state and step …
-
Gas independent thermal flow measurement
… topic of this dissertation is related to thermal flow meters and the flow error compensation due to the different thermo-physical properties of the working medium, which could be other than the medium used for the calibration of the sensor. The motivation of this dissertation was not only to make …
-
Slurry Flow Measurement Using Coriolis Flowmeters
… thesis describes a novel methodology for slurry flow measurement using Coriolis flowmeters incorporating error compensation and structural condition monitoring techniques. This work investigates the influence of entrained solid particles on Coriolis flow metering along with the potential wear …
-
Fluid flow measurement using correlation techniques
… of the temperature cross correlation method to measurement of flow under steady and pulsating flow conditions is investigated. The factors to be considered in applying this technique to different flow systems are discussed and its advantages over the conventional techniques are highlighted. The …
-
Positron Emission Tomography (PET) for Flow Measurement
… domain. It can be used as a tool for fluid flow studies in opaque fluids and for flow within complex geometry where conventional optical flow measurement approaches fail. This study explores the capabilities of PET as flow measurement tool suited to validation of computational fluid dynamic …
-
Two-Phase Flow Measurement of Geothermal Fluid
Online, real-time, two-phase fluid measurement of mass flow rate and enthalpy are necessary and important for monitoring individual well performance and for optimum geothermal reservoir management. Existing research on two-phase flow measurements in geothermal applications was examined and the …
-
Three-dimensional unsteady gas turbine flow measurement
… and longevity of a modern gas turbine. The flow field within this stage is highly complex and is both unsteady and three-dimensional. Understanding this flow field is essential if improvements are to be made to future engine designs.</p> <p>Increasingly designers are placing more emphasis on …
-
High efficiency dynamic pressure based flow measurement
… towards the development of different types of flow-metering techniques. High pressure drop after passing the metering device and partial obstruction of the flow represent the two most common problems for the majority of the existing flow-metering devices. The main intention of the current study …
-
Flow Measurement and Leakage Detection of Gaseous CO2
… Averaging Pitot Tube (APT) and a Coriolis mass flowmeter (CMF), for CO2 flow measurement, together with the design and implementation of a CO2 flow calibration facility. A prototype system for the leak detection of the gas phase of CO2 is also developed. A review of the methodologies and …
-
High sensitivity MEMS sensors for air flow measurement
… in micromachined transducer technology for gas flow sensing, focusing on three innovative Micro-Electro-Mechanical Systems (MEMS) sensor designs: capacitive differential pressure sensor, Piezoelectric Micromachined Ultrasonic Transducer (pMUTs), and Capacitive Micromachined Ultrasonic Transducer …
-
Application of some hydraulic principles to flow measurement
For flow near the end section of a trapezoidal channel, the velocity distribution is non-uniform and the streamlines are curved. At the end section of the overfall, the streamline pattern in the vertical plane of channel symmetry can be determined using the measured axial velocity data and the …
-
Experimental Evaluation of Flow-Measurement-Based Drag Estimation Methods
… for estimating the drag based on experimental flow field measurements were assessed for two-dimensional bodies. The effects of control volume boundary placement and inherent simplifying assumptions were also investigated. Wind tunnel experiments were performed on a circular cylinder operating …
-
A thermistor based sensor for flow measurement in water
… structures has been designed and developed. The flow sensor, a thermal anemometer, consists of a self-heated thermistor that is maintained at constant temperature using a feedback control circuit. The thermistor is exposed to the moving fluid and the heat transfer from it is a function of the …
-
High speed flow measurement devices for gasoline fuel injectors
… there are no real-time and on-engine direct mass measurements of fuel flow in individual cylinders of an engine due to the lack of appropriate measurement techniques. To achieve this, in this thesis two potential solutions: pressure methods (One Pressure Transducer Method (OPTM) and Two Pressure …
-
Impedance Sensors for Fast Multiphase Flow Measurement and Imaging
Multiphase flow denotes the simultaneous flow of two or more physically distinct and immiscible substances and it can be widely found in several engineering applications, for instance, power generation, chemical engineering and crude oil extraction and processing. In many of those applications, …
-
Quantitative cerebral blood flow measurement with Multi Exposure Speckle Imaging
Cerebral blood flow (CBF) measures are central to the investigation of ischemic strokes, spreading depressions, functional and neuronal activation. Laser Speckle Contrast Imaging (LSCI) is an optical imaging technique that has been used to obtain CBF measures in vivo at high spatial and temporal …
-
Design and Calibration of Seven Hole Probes for Flow Measurement
… and use of seven hole pressure probes for hot flow measurement was studied extensively, and guidelines were developed for the calibration and use of these probes. The influence of tip shape, Reynolds number, calibration grid density, and curve fit were studied and reported. Calibration was done …
Page 1 of 22