Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 57 for “"Flow Number"”.
-
Effect of FORTA-FI Fibers on the Rutting Potential, Dynamic Modulus, Flow Number, and Fatigue of Asphalt Concrete
… on the AMPT determined the dynamic modulus, flow number, and fatigue characteristics of the two mixes. Dynamic modulus master curves were developed using Bonaquist's MasterSolver Version 2.2 to compare the stiffness of the two mixes. The flow number was evaluated using the Data Smoothing …
-
Deformação permanente de misturas asfálticas : avaliação do desempenho conforme critério de flow number de misturas quentes e mornas
… uniaxial de carga repetida parametrizado pelo Flow Number (FN). Neste sentido, a presente pesquisa buscou analisar o comportamento à deformação permanente, através do ensaio uniaxial de carga repetida, de dez misturas asfálticas. Os materiais utilizados na pesquisa foram: agregados pétreos de …
-
Testing Wisconsin asphalt mixtures for the 2002 AASHTO mechanistic design procedure
… of this methodology include dynamic modulus and flow number, which have been shown to correlate with field pavement performance. This thesis was based on a portion of a research project being conducted at Michigan Technological University (MTU) for the Wisconsin Department of Transportation …
-
Evaluation of Asphalt Mixture Performance Tester and Testing Protocol
… capable of performing dynamic modulus |E*| and flow number tests, was the product of these sponsored research projects.;The objective of this research was to set up the AMPT, establish a working procedure for preparing and testing specimens in the machine, demonstrate the machines capabilities …
-
Evaluating the protocol of the spectrum of hot mix asphalt mixes produced in West Virginia
… testing machine that has dynamic modulus, flow number, and fatigue testing capabilities. This research focused on using the AMPT to determine dynamic modulus, fatigue characterization, and flow number values of the asphalt mixes. Master curves were developed using Mastersolver Version 2.2 …
-
Stochastic finite element analysis of moisture damage in hot mix asphalt
… of unconfined dynamic modulus and creep (flow number) tests as performance tests for inclusion in the Superpave mix design process make these candidate tests for inclusion in moisture sensitivity testing. The challenge in moisture sensitivity testing is the ability to capture the various …
-
Evaluation of Hot Mix Asphalt moisture sensitivity using the Nottingham Asphalt Test equipment
… based on performance character; retained flow number (RFN) and energy ratio (EE). Analysis based on energy ratio of elastic strain (ER[subscript EE]) at flow number of cohesion failure (FN[subscript C]) is more high potential to evaluate the HMA moisture sensitivity than other analysis. If …
-
Effects of Coarse Aggregate Morphological Characteristics on Mechanical Performance of Stone Matrix Asphalt
… included wheel-track loading, dynamic modulus, flow number, and beam fatigue. The wheel tracking test included asphalt pavement analyzer (APA) and Model mobile load simulator (MMLS). In the APA test, samples included eight types of SMA mixtures that consisted of aggregates of 22 fractions. In …
-
Modelagem da deformação permanente de misturas asfálticas a partir de princípios viscoplásticos
… ensaio SSR (Stress Sweep Rutting) e o ensaio de flow number (FN) com os objetivos de avaliar: o comportamento da mistura asfáltica a partir da variação de parâmetros do ensaio conforme previsto pela proposta de norma brasileira e a AASHTO TP 134; o parâmetro RSI e o FN como identificador das …
-
Development and validation of a novel testing procedure for the evaluation of rutting susceptibility of bituminous binders.
… of testing protocol was to reach steady state flow during creep phase at all temperatures. In case of MSCR tests on AR and PMB tests were started at 64 °C and for NA and NB same temperature range selected for SCR and MSC was also applied. In case of SCR-MSC creep compliance rate from creep …
-
Influence of post-consumer recycled asphalt shingles on hot mix asphalt containing fractionated recycled asphalt pavement
… of the mixes were obtained for dynamic modulus, flow number, moisture sensitivity, beam fatigue, and fracture energy tests in addition to binder extraction and subsequent characterization. From the dynamic modulus testing, master curves were constructed to characterize the stress/strain response …
-
Development of a Framework to Evaluate Asphalt Binder and Plant Produced Asphalt Mixes for Acceptance in Canada
… Test, and Asphalt Mix Performance Tester (AMPT) Flow Number for the asphalt mixes. As asphalt binders oxidize or age, their ability to relax stresses at low temperatures diminishes. The ΔTc parameter provides an indication of loss of ductility: when the asphalt binder cannot relax the stresses …
-
Development of specifications for the superpave simple performance tests
… dynamic modulus terms (E*/sinϕ and E*) and the flow number (Fn) for typical Michigan HMA mixtures, 2) correlate the results of the laboratory study to field performance as they relate to flexible pavement performance (rutting, fatigue, and low temperature cracking), and 3) make recommendations …
-
Characteristics of Dynamic Triaxial Testing of Asphalt Mixtures
… jeopardizes the road users' safety.The flow number (FN) simple performance test for asphalt mixtures was one of the final three tests selected for further evaluation from the twenty-four test/material properties initially examined under the NCHRP 9-19 project. Currently, no standard …
-
Evaluation of Warm Mix Additives for Use in Modified Asphalt Mixtures
… evaluation of moisture sensitivity of mixtures. Flow Number (FN) and Flexural beam fatigue tests were conducted to evaluate the performance characteristics of WMA additives/technology.The terminal blend tire rubber-modified binder with lime treatment works effectively in resisting moisture …
-
Investigation of Rutting Resistance of Superpave 5 Asphalt Mixtures
… test, |E*| (diametral dynamic modulus) test, and flow number test. The performance test results showed that the SP5 mixtures have better rutting and cracking resistance, compared to the original SP4 mixtures, and the concern associated with more compactable mixtures is not valid.
-
Characterization of Warm Mix Asphalt (WMA) performance in different asphalt applications
… to dynamic modulus and permanent deformation (flow number). Each mixture was developed using a PG 64-22 binder and two types of aggregates: limestone or quartzite. In addition, this study will look into whether WMA additives enable the production of high RAP content (30%) mixtures with …
-
Comparative Evaluation of Field and Laboratory-Produced Foamed Asphalt Mixture from Reno, Nevada
… the repeated load triaxial (RLT) to measure the flow number (FN). The low-temperature cracking resistance of the mixtures was evaluated using the thermal stress restrained specimen test (TSRST). From this study it was determined that the HMA had better resistance to moisture damage and permanent …
-
Experimental Investigation of Pressure-Swirl Atomizer Spray Stability with Addition of a Pre-Filming Surface
… the pre-filming surface increased the atomizer flow number and discharge coefficient. When comparing spray edge variation, the atomizer without a pre-filming surface demonstrated an increasing spray edge variation with increasing pressure while the opposite trend was observed in the atomizer …
-
A laboratory investigation of high polymer modified asphalt mixtures with softening agent
… (|E*|), Hamburg Wheel Tracking Device (HWTD), Flow Number (FN), Indirect Tension Cracking Test (IDEAL-CT), Semi-Circular Bend (SCB), Disk-Shaped Compact Tension (DCT), and Cantabro Durability tests. The impact of aging on cracking resistance was also evaluated by subjecting all mixes to short-, …
Page 1 of 3