Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 104 for “"Flow sensor"”.

  1. Self-calibrating mass flow sensor

    … accuracy and self-calibration for a mass flow sensing system on a combine. This was undertaken as part of the John Deere Technology Innovation Center (JDTIC)-sponsored research program “Self-calibrating mass-flow sensor”, in turn part of a John Deere Moline Technology Innovation Center …

    uiuc Repository record for Self-calibrating mass flow sensor (opens in a new tab)

  2. Surface Acoustic Wave (SAW)-Based Gas Flow Sensor

    … undertaken to derive a model of a SAW-based gas flow rate sensor, using the principle of heat transfer with the flow of gas. It consists of a SAW delay line fabricated on a suitable substrate and a thin film heater to heat the SAW device to a suitable temperature above the ambient. The delay line …

    marquette Repository record for Surface Acoustic Wave (SAW)-Based Gas Flow Sensor (opens in a new tab)

  3. Development of a Low-Cost Ultrasound Flow Sensor

    … a promising alternative; however, existing gas flow and composition sensors are typically too expensive for large-scale deployment in decentralized settings. This thesis presents the design, implementation, and evaluation of a low-cost transit-time ultrasonic flow meter intended for biogas …

    ethz Repository record for Development of a Low-Cost Ultrasound Flow Sensor (opens in a new tab)

  4. A Novel Flow Sensor for a Smart Shunt System

    … determine the shunt performance by measuring the flow rate in the compartment. The concept behind this microdevice is to establish a feedback system of measured conditions and analyzed data, providing parameters to examine shunt efficiency. The purpose of this microdevice is to improve current …

    uconn-diss Repository record for A Novel Flow Sensor for a Smart Shunt System (opens in a new tab)

  5. MASS FLOW SENSOR DEVELOPMENT FOR AN AIR SEEDING CART

    … process are the seeding rate (material mass flow rate), air flow rate, and blockages. In current practice, there are systems that monitor and report air flow and blockages but not the actual seeding rate. Presently, the seeding rate is based on the metering calibration before the seeding …

    sask Repository record for MASS FLOW SENSOR DEVELOPMENT FOR AN AIR SEEDING CART (opens in a new tab)

  6. Modelling of the conical entrance orifice plate flow sensor

    … a model for conical entrance orifice plate flow sensor and the results of the applica-tion of the model. The model for the conical entrance orifice plate flow sensor was developed using a low Reynolds number k-e model of turbulence - the Lam and Bremhorst k-e model, and the 'PHOENICS' …

    city-london Download PDF for Modelling of the conical entrance orifice plate flow sensor (opens in a new tab)

  7. Microfabrication of a MEMS piezoresistive flow sensor - materials and processes

    … systems (MEMS) based artificial sensory hairs for flow sensing have been widely explored, but the processes involved in their fabrication are lithography intensive, making the process quite expensive and cumbersome. Most of these devices are also based on silicon MEMS, which makes …

    gatech Repository record for Microfabrication of a MEMS piezoresistive flow sensor - materials and processes (opens in a new tab)

  8. Modelling and Optimization of Air Flow Sensor Within CPAP System

    … pressure whilst monitoring the patient s air flow, and raise the pressure as the OSA is detected, rather than maintaining a fixed higher minimum pressure in order to reduce OSA symptoms. In order to detect OSA, an air flow sensor is considered ideally suited to assemble within the CPAP system …

    auckland-tech Repository record for Modelling and Optimization of Air Flow Sensor Within CPAP System (opens in a new tab)

  9. Microfabrication of variable range and multi-directionally sensitive thermal flow sensor

    … sensitive micromachined thermal flow sensor based on amorphous germanium thermistors. For measuring various flow ranges and flow directions with a single device, twelve thermistors are placed on an 2 x 2 mm supporting square shaped dielectric membrane made with silicon nitride. …

    missouri Repository record for Microfabrication of variable range and multi-directionally sensitive thermal flow sensor (opens in a new tab)

  10. 3D printed conducting polymer microstructures as an ultra-low velocity flow sensor

    … as a means of sensing and measuring air flow levels observed during neonatal resuscitation. In this thesis, I present a reliable means of fabricating three-dimensional CP microstructures, in particular focusing on fabricating hair-like microstructures from Poly(3,4-ethylenedioxythiophene) …

    auckland-ms Repository record for 3D printed conducting polymer microstructures as an ultra-low velocity flow sensor (opens in a new tab)

  11. Real-Time Optical Flow Sensor Design and its Application on Obstacle Detection

    … algorithm is developed to analyze the optical flow field and detect obstacles for unmanned ground vehicle applications. The motion component is de-rotated, de-translated and postprocessed to detect obstacles. All these steps can be efficiently implemented in FPGAs. The characteristics of the …

    byu Repository record for Real-Time Optical Flow Sensor Design and its Application on Obstacle Detection (opens in a new tab) Download PDF for Real-Time Optical Flow Sensor Design and its Application on Obstacle Detection (opens in a new tab)

  12. Development of Wireless Implantable Micro Flow Sensor for Conditional Monitoring of VP Shunts

    … high sensitivity implantable microfluidics flow sensor using MTJ magnetic sensors to detect motion of slow-moving fluids. A motivating application for the proposed device is the development of an implantable flow sensor, capable of monitoring the amount of cerebral spinal fluid drained from …

    arizona-thes Repository record for Development of Wireless Implantable Micro Flow Sensor for Conditional Monitoring of VP Shunts (opens in a new tab)

  13. A HIGHLY PRECISE AND LINEAR IC FOR HEAT PULSE BASED THERMAL BIDIRECTIONAL MASS FLOW SENSOR

    … a thermal bi-directional integrated circuit mass flow sensor. The approach used here was an extension to the gas flow model given by Mayer and Lechner. The design features high precision response received from analog integrated circuits. A computational fluid dynamic (CFD) model was designed for …

    iupui Repository record for A HIGHLY PRECISE AND LINEAR IC FOR HEAT PULSE BASED THERMAL BIDIRECTIONAL MASS FLOW SENSOR (opens in a new tab)

  14. Frequency Response Enhancement of a Flow Sensor Using Diamond Thin Films Synthesized by Plasma CVD

    … frequency response of a conventional thin film flow sensor. This thesis involved fabricating and testing a conventional thin film sensor of nickel on quartz (Ni/Q) and a diamond enhanced sensor (Ni/D/Q) for comparative frequency response analysis to validate the theory. Diamond films were grown …

    odu Repository record for Frequency Response Enhancement of a Flow Sensor Using Diamond Thin Films Synthesized by Plasma CVD (opens in a new tab)

  15. Analysis of combine grain yield monitoring systems: an evaluation of autonomous calibration of mass-flow sensor

    … and efficiency. Traditional elevator mount mass-flow yield monitors are vulnerable to error due to insufficient calibrations and material flow inconsistencies resulting from threshing and separating processes. An advanced interconnected system that is able to autonomously analyze and adjust the …

    manitoba Repository record for Analysis of combine grain yield monitoring systems: an evaluation of autonomous calibration of mass-flow sensor (opens in a new tab)

  16. Normally-closed dispensing valve and in-line pressure and flow sensor fabricated in low-cost polymer technology

    … range with high precision and an online sensor control. Three components are developed within this thesis: a low-cost solenoid dispensing valve and a single-use pressure and flow sensor. All liquid carrying parts of these components are fabricated in low-cost polymer technology so that …

    freiburg-diss Repository record for Normally-closed dispensing valve and in-line pressure and flow sensor fabricated in low-cost polymer technology (opens in a new tab)

  17. Design and Application of a Novel Optical Methane Flow Sensor to Quantify Methane Vent Sources at Upstream Oil and Gas Sites

    … characterization of an optical methane mass flux sensor, called the VentX, which was designed for use in hazardous locations such as upstream oil and gas facilities for the continuous quantification of methane emissions from point sources. Two configurations were initially described, with directly …

    carleton Repository record for Design and Application of a Novel Optical Methane Flow Sensor to Quantify Methane Vent Sources at Upstream Oil and Gas Sites (opens in a new tab)

  18. DEVELOPMENT OF TEMPERATURE AND FLOW SENSORS FOR MICROFLUIDIC APPLICATIONS

    … devices. The development of such micro sensors will allow real time monitoring and control of many processes at the micro level, and play a crucial role in expanding microfluidics to novel applications. For example, integration of sensors within the microfluidic device itself will allow …

    mcmaster Repository record for DEVELOPMENT OF TEMPERATURE AND FLOW SENSORS FOR MICROFLUIDIC APPLICATIONS (opens in a new tab)

Page 1 of 6