Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"Flow separation control"”.

  1. Vortical Flow Effects on Flow Separation Control

    … frequency, amplitude, and the incident angle on flow separation control is studied numerically in this thesis. Two configurations are investigated, cylinders in tandem and the cylinder-airfoil arrangement. The upstream cylinder changes locations, size, and oscillating frequencies and amplitudes, …

    ku Repository record for Vortical Flow Effects on Flow Separation Control (opens in a new tab)

  2. Numerical simulation of flow separation control by oscillatory fluid injection

    In this work, numerical simulations of flow separation control are performed. The sep-aration control technique studied is called 'synthetic jet actuation'. The developed code employs a cell centered finite volume scheme which handles viscous, steady and unsteady compressible turbulent flows. The …

    tamu Repository record for Numerical simulation of flow separation control by oscillatory fluid injection (opens in a new tab)

  3. Flow Separation Control Using Synthetic Jets on a Flat Plate

    … is to assess the effect of synthetic jets on flow separation. CFD simulation is conducted for laminar flow over a flat plate using the commercial software ANSYS FLUENT. The oscillating zero mass jet flow is simulated by imposing a harmonically varying boundary condition on the wall surface. In …

    embry-riddle Repository record for Flow Separation Control Using Synthetic Jets on a Flat Plate (opens in a new tab)

  4. Modeling of D/C motor driven synthetic jet acutators for flow separation control

    … D/C motor driven synthetic jet actuator for flow separation control. Hot wire anemometer experiments were conducted to validate the jet exit velocities predicted by the theoretical model. The optimal jet exit velocity required to achieve maximum flow reattachment at reasonable blowing …

    tamu Repository record for Modeling of D/C motor driven synthetic jet acutators for flow separation control (opens in a new tab)

  5. Aerodynamic design optimization and flow separation control of the UAS-S45 using wing morphing technology

    … performed at the Research Laboratory in Active Controls, Avionics, and AeroServoElasticity (LARCASE). This includes an optimization framework, which combines an optimization algorithm, airfoil parameterization techniques, and an aerodynamic solver. To obtain the optimized wing shapes, different …

    ets-quebec Download PDF for Aerodynamic design optimization and flow separation control of the UAS-S45 using wing morphing technology (opens in a new tab)

  6. Experimental investigations of shark skin inspired surfaces in air

    Flow separation is detrimental to the performance of a wide array of engineered systems. It is theorized that the shortfin mako shark has evolved a passive flow separation control mechanism – distinct from that of riblet skin-friction reduction – based on the passive flow-actuation of its …

    alabama Repository record for Experimental investigations of shark skin inspired surfaces in air (opens in a new tab)

  7. Investigation of Scaling Effects for a Synthetic Jet Actuator Using High and Low Fidelity Analyses

    … a vibrating diaphragm to generate an oscillatory flow through a small orifice. A synthetic jet actuator can be used on MAVs as thrust generator or fixed on an airfoil for flow separation control. A Computational Fluid Dynamics (CFD) model was created, using Ansys-CFX, to be validated against …

    embry-riddle Repository record for Investigation of Scaling Effects for a Synthetic Jet Actuator Using High and Low Fidelity Analyses (opens in a new tab)

  8. Numerical Study of Nozzle Geometry Effects on Three-Dimensional Offset Synthetic Jets

    … the influence of nozzle geometry on the unsteady flow characteristics, vortex dynamics, and wall interactions of three-dimensional offset synthetic jets using improved delayed detached eddy simulations (IDDES). Simulations were conducted at a Reynolds number based on the maximum jet-exit velocity …

    concordia Download PDF for Numerical Study of Nozzle Geometry Effects on Three-Dimensional Offset Synthetic Jets (opens in a new tab)

  9. The Influence of Surface Roughness Frequency on Rotating Sphere Aerodynamics

    … aircraft from stalling all have a common thread: controlling flow separation. Defined by the fast moving flow around an object detaching from the object, flow separation has implications for a broad number of engineering fields. Research regarding flow separation control has led to the …

    utahstate Repository record for The Influence of Surface Roughness Frequency on Rotating Sphere Aerodynamics (opens in a new tab)

  10. An investigation of dielectric barrier discharge based plasma actuator designs with enhanced performance in active flow control

    … more efficient in the aerodynamic active flow control. Based on the electric wind generation schemes of the AC signal driven plasma actuator, two features intended to explore the controlling of the accumulated surface charges are introduced in the new plasma actuator design: 1. By adding a …

    umn Repository record for An investigation of dielectric barrier discharge based plasma actuator designs with enhanced performance in active flow control (opens in a new tab)

  11. Turbulent separation control effects of mako shark skin samples on a naca 4412 hydrofoil

    Shark skin is investigated as a means of passive flow separation control due to its preferential flow direction and the potential for its scales to obstruct low-momentum backflow resulting from an adverse pressure gradient. In this study, the effect of the scales on flow reversal is observed in a …

    alabama Repository record for Turbulent separation control effects of mako shark skin samples on a naca 4412 hydrofoil (opens in a new tab)

  12. Laminar separation control effects of shortfin mako shark skin

    Shark skin is investigated as a means of laminar flow separation control due to its preferential flow direction as well as the potential for scales to erect and obstruct low-momentum backflow resulting from an adverse pressure gradient acting on the boundary layer. In this study, the effect of the …

    alabama Repository record for Laminar separation control effects of shortfin mako shark skin (opens in a new tab)

  13. An Investigation of Dolphin-Groove Inspired Surface Patterning on Flow Control

    A problem in many flow applications is boundary layer separation; this study investigates the passive separation control mechanism that could result from the micro-grooves found on dolphin skin (Tursiops truncates). A water tunnel was used to study a turbulent boundary layer over rigid 3D printed …

    alabama Repository record for An Investigation of Dolphin-Groove Inspired Surface Patterning on Flow Control (opens in a new tab)

  14. Aerodynamics and multi-fidelity surrogate modelling of an inverted wing with vortex generators in ground effect

    … layer vortex generator type, can be effective at controlling flow separation, with a resultant improvement in downforce within relatively low drag penalty. The results also reveal fundamental vortex characteristics for flow separation control.<br/><br/>A computational study is performed by …

    soton Download PDF for Aerodynamics and multi-fidelity surrogate modelling of an inverted wing with vortex generators in ground effect (opens in a new tab)

  15. Ducted Fan Aerodynamics and Modeling, with Applications of Steady and Synthetic Jet Flow Control

    … vehicle flight and therefore require complex control algorithms. In particular, they exhibit a large nose-up pitching moment during wind gusts and when transitioning from hover to forward flight. Understanding ducted fan aerodynamic behavior and how it can be altered through flow control …

    vt Repository record for Ducted Fan Aerodynamics and Modeling, with Applications of Steady and Synthetic Jet Flow Control (opens in a new tab)

  16. Study of Periodic Forcing with a Dielectric Barrier Discharge Device for the Control of Flow Separation on a NACA 0012

    … costs and several tragic cases involving loss-of-control events, has resulted in researchers examining alternative technologies, which would result in safer, more reliable, and superior performing aircraft. Aerodynamic flow control may be the most promising approach to this problem having already …

    wvu Repository record for Study of Periodic Forcing with a Dielectric Barrier Discharge Device for the Control of Flow Separation on a NACA 0012 (opens in a new tab)

  17. Aeroelasticity of Morphing Wings Using Neural Networks

    … These neural networks are developed into a control system for flutter suppression. Another type of aeroelastic problem of an adaptive structure that is investigated here is the shape control of an adaptive bump situated on the leading edge of an airfoil. Such a bump is useful in achieving …

    vt Repository record for Aeroelasticity of Morphing Wings Using Neural Networks (opens in a new tab)

Page 1 of 2