Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 252 for “"Fluidized beds"”.
-
Gas Fired Fluidized Beds
… theoretical, have been made of gas combustion in fluidized beds. A mathematical model has been developed which gives a qualitative estimation of the bed temperature profiles in the axial direction. The concept of Effective Thermal Conductivity is discussed, and bed conductivities are re-defined …
-
Adsorption in Fluidized Beds
Made available in DSpace on 2014-12-05T17:15:24Z (GMT). No. of bitstreams: 1 5801683.pdf: 2365803 bytes, checksum: b4154f67ac876e9bdb8297aaa2b0cc6d (MD5) Previous issue date: 1958
-
Tube erosion in fluidized beds
… transfer tubes suffer erosion when immersed in fluidized beds. This has caused problems, especially in fluidized bed combustors. The mechanism of erosion for horizontal tubes in fluidized beds is not well understood. The purpose of this study was to investigate the erosion mechanism in fluidized …
-
Heat transfer in fluidized beds.
… between gas and solid particles was studied in fluidized beds, 2 and 4 inches in diameter. Air velocities of 0.543 to 4.347 ft./sec. and bed-settled heights to diameter ratios from 0.2 to 8 were employed in transient heating and cooling of 0.004 to 0.2324 inch particles of glass beads, silica …
-
Reaction Kinetics in Fluidized Beds
Made available in DSpace on 2014-12-05T17:15:14Z (GMT). No. of bitstreams: 1 0010545.pdf: 4728103 bytes, checksum: 605ca5e31d62bfc89d008e54b1de0a67 (MD5) Previous issue date: 1954
-
Hydrodynamics of three-phase fluidized beds
… hydrodynamics of three-phase (gas-liquid-solid) fluidized beds has been studied in two columns with inside diameters of 7.62 and 15.2 cm respectively. The minimum gas and liquid velocities necessary to fluidize various types of solids were determined and correlated as of the a function of the …
-
Heat transfer in circulating fluidized beds
Heat transfer in circulating fluidized beds was studied in both a 7.3 m high, 152 x 152 mm square, pilot-scale combustor and a 9.3 m high, 152 mm ID transparent cold model unit. Results were obtained for particles of mean size 171-299 µm at superficial gas velocities from 4 to 9.5 m/s and for …
-
Visualizing fluidized beds with X-rays
… X-ray stereography, and particle tracking to fluidized beds of glass beads, ground walnut shell, and ground corncob operating with a variety of flow conditions. 3-D local, time-averaged gas holdup is calculated from CT data, while dynamic features are captured by X-ray stereography. The …
-
Eulerian-Eulerian Modeling of Fluidized Beds
Fluidized bed reactor technology has been widely adopted within the industry as vital component for numerous manufacturing, power generation and gasification processes due to its enhanced mixing characteristics. Computational modeling of fluidized bed hydrodynamics is a significant challenge that …
-
Modeling of agglomerate abrasion in fluidized beds
Agglomeration occurs in fluidized beds in many industrial processes. It can be a desirable phenomenon, for instance in the pharmaceutical industries, or undesirable, as when it occurs in the Fluid Cokers used in bitumen processing. Excessive agglomerate growth can lead to a reduced efficiency of …
-
Electro-hydrodynamics of gas-solid fluidized beds
… of electrical charges, reported in gas-solid fluidized beds for over sixty years, can cause serious problems like wall sheeting in polyolefin reactors, leading to costly shutdown, electrical shock hazards and even explosions. Understanding the associated phenomena plays an important role to …
-
Hydrodynamics of gas-solid turbulent fluidized beds
Many commercial fluidized bed processes (e.g. catalytic and gas-solid reactions, drying) operate in the turbulent fluidization flow regime owing to its excellent gas-solids contacting, favourable heat transfer, and relatively low axial dispersion of gas. The flow characteristics of turbulent …
-
Electrostatic charging in gas-solid fluidized beds
Electrostatic charges in fluidized beds, generated through various mechanisms such as triboelectrification, ion collection, thermionic emission, and frictional charging, can cause particle agglomeration and hazardous electrical discharges. In this study, electrostatic charging in gas-solid …
Page 1 of 13