Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 114 for “"Flumes"”.

  1. Effects of Submergence in Montana Flumes

    … thirteen of them were originally Parshall flumes. A large percentage of Parshall flumes with geometry inaccuracies was also found from previous data collected for this project. One reoccurring issue was that the flumes had not been well maintained and had damage to the walls or floor. Some …

    utahstate Repository record for Effects of Submergence in Montana Flumes (opens in a new tab)

  2. Accuracy investigations of Parshall flumes and propeller meters

    … accuracy at each of the four existing Parshall flumes. Tests were performed at effluent propeller meters to determine their accuracy. Hydraulic improvements are suggested for reduction of both flow disturbances and measurement errors.

    unlv Repository record for Accuracy investigations of Parshall flumes and propeller meters (opens in a new tab) Download PDF for Accuracy investigations of Parshall flumes and propeller meters (opens in a new tab)

  3. Unified Rating Equations for Cutthroat Flumes Derived from a Three-Dimensional Hydraulic Model

    … to develop complete calibrations for Cutthroat flumes, which are structures used in canals (or “open channels”) to measure flow rates. Although Cutthroat flumes have been used for many years, and much research has been done on their calibrations and application in the field, never before was …

    utahstate Repository record for Unified Rating Equations for Cutthroat Flumes Derived from a Three-Dimensional Hydraulic Model (opens in a new tab)

  4. Parshall Flume Staff Gauge Location and Entrance Wingwall Discharge Calibration Corrections

    … devices were tested, the majority were Parshall flumes. Many of the assessed Parshall flumes were not measuring flow to the specified ±5 percent design accuracy. Problems in flow measurement were due to issues with the staff gauge location and incorrect entrance geometry. Laboratory tests were …

    utahstate Repository record for Parshall Flume Staff Gauge Location and Entrance Wingwall Discharge Calibration Corrections (opens in a new tab)

  5. Monitoring Methods and Performance Assessment for Implementation of Low Impact Development Practices in South Dakota

    … device was developed to monitor flow. Flumes are widely used for measuring flow but can be expensive for widespread monitoring. Using 3D printing technology to produce flumes is very cost-effective, but no discharge equations have been developed for 3D printed flumes and printing …

    sdstate Repository record for Monitoring Methods and Performance Assessment for Implementation of Low Impact Development Practices in South Dakota (opens in a new tab)

  6. Habitat Selection and Host Detection in the Salamander Mussel, Simpsonaias ambigua

    … was examined using choice arenas and choice flumes. Variables tested in arenas included taxis with respect to flow, toward vertical edges, to positions beneath clear or opaque shelters, and aggregation with other individuals. Variables tested in choice flumes included movement toward host …

    mo-state Repository record for Habitat Selection and Host Detection in the Salamander Mussel, Simpsonaias ambigua (opens in a new tab)

  7. Analysis of Cutthroat Flume Discharge Ratings

    … to generalize the calibrations for Cutthroat flumes. This is a very tedious process requiring a trial-and-error approach. Finally, comparisons are made of the measured laboratory discharges with the predicted discharges for both free flow and submerged flow using both the best-fit and the …

    utahstate Repository record for Analysis of Cutthroat Flume Discharge Ratings (opens in a new tab)

  8. Basin tillage for erosion control

    … collected at 4-minute intervals from type HS flumes installed at each plot outlet. Runoff rates were determined by measuring the depths of flow in the flumes. Sediment concentrations in the runoff water samples were determined by laboratory analyses and subsequently translated to mass of soil …

    ut-knoxville Repository record for Basin tillage for erosion control (opens in a new tab)

  9. Meandering river dynamics

    … correct explanation of behavior observed in flumes, where a fixed inlet leads to the long-term decay of all meanders. We show that a continuous perturbation is required for sustained meandering. With a driven perturbation at the inlet, we find that high (low) frequency driving results in …

    uiuc Repository record for Meandering river dynamics (opens in a new tab)

  10. Utility of stream mesocosms for climate change research

    … assemblages in an array of artificial flumes near the River Itchen in southern U.K. High quality groundwater supply and similar exposure to the environment lead water physicochemistry to be highly replicate across all channels. The within- and between-flume replicate design reduced …

    birmingham Download PDF for Utility of stream mesocosms for climate change research (opens in a new tab)

  11. Point Flow Measurements in Irrigation Furrows

    … measuring devices such as weirs, orifices or flumes which require a loss of head in their operation, are usually unsatisfactory because to create a measuring head would alter the normal flow depth upstream thus changing the intake pattern. The purpose of this study is to develop a simple, …

    utahstate Repository record for Point Flow Measurements in Irrigation Furrows (opens in a new tab)

  12. Numerical Modeling of Flow in Parshall Flume Using Various Turbulence Models

    … geometric setups for different sizes of Parshall flumes. The result from various families of turbulence models, i.e., Reynold Average Navier-Stokes (RANS), Large Eddy Simulation (LES) and Detached Eddy Simulation (DES), used in this study, provide promising values with acceptable margins of error, …

    ottawa-retro Repository record for Numerical Modeling of Flow in Parshall Flume Using Various Turbulence Models (opens in a new tab)

  13. Analysis of the Sediment Transport Capabilities of TUFLOW

    … not capable at this time of recreating the lab flumes and more features need to be added to accurately portray the flumes. TUFLOW did show perturbations, common for semi-coupled models, in the results for certain test cases. Filtering, a common way of removing perturbations was implemented and …

    byu Repository record for Analysis of the Sediment Transport Capabilities of TUFLOW (opens in a new tab) Download PDF for Analysis of the Sediment Transport Capabilities of TUFLOW (opens in a new tab)

  14. Waterpower : a geophysical and archaeological investigation of the waterpower system at the West Point Foundry, Cold Spring, New York

    … network of surface and subsurface drains, races, flumes, waterwheels, turbines, dams, and ponds that powered operations and regulated water flow throughout the site. Archaeologists utilized non-destructive geophysical technology, which expedited survey, facilitated placement of excavation units, …

    mtu Repository record for Waterpower : a geophysical and archaeological investigation of the waterpower system at the West Point Foundry, Cold Spring, New York (opens in a new tab)

Page 1 of 6