Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 52 for “"Fluoride Salt"”.
-
Carbon Effects on Corrosion in Molten Fluoride Salt
The fluoride salt-cooled high temperature reactor (FHR) is a Generation IV reactor concept that uses molten fluoride salt as the primary coolant to enable breakthrough improvements in economics and safety over the current generation of reactors. However, graphite fuel elements and other carbon …
-
Species Chemistry and Electrochemical Separation in Molten Fluoride Salt
Fluoride salt-cooled high-temperature reactor (FHR) is a safer and potentially less expensive alternative to light water reactor due to the low pressure of primary system, passive decay heat cooling system, chemically inert coolant salt, and high-temperature power cycle. However, one challenge …
-
Effects of Redox Potential on Corrosion in Molten Fluoride Salt
… there has been an increased interest in Molten Salt Nuclear Reactors (MSR) and Concentrated Solar Power Plants (CSP) as methods of generating clean, safe, and economical energy. For MSRs, this will be accomplished by using molten salts, commonly molten fluoride salts such as FLiNaK (LiF-NaF-KF), …
-
Developing a framework for thermodynamic measurements of fluoride salt nuclear fuel
… as a primary coolant and a nuclear fuel, molten salt reactor development has been challenged with understanding the behavior of its complex fluoride solution under various conditions. Experimental thermodynamics can address part of this challenge by providing insights into the system’s behaviour, …
-
Fluoride-salt-cooled high-temperature reactor generative design optimization with evolutionary algorithms
Submission original under an indefinite embargo labeled 'Open Access'. The submission was exported from vireo on 2023-04-12 without embargo terms
-
A Whole-Core Thermal Hydraulic Model for Pin-Fueled Fluoride-Salt-Cooled Reactors
Fluoride-salt-cooled high-temperature reactors (FHRs) are an emerging category of reactors that combine the graphite-matrix coated-particle fuel developed for high temperature gas reactors (HTGRs) with a high heat capacity, single-phase molten salt coolant. One of the potential configurations for …
-
Experimental and Computational Investigations of Heat Transfer Systems in Fluoride Salt-cooled High-temperature Reactors
Fluoride salt-cooled high-temperature reactors (FHRs) face a number of challenges similar to those faced by other Generation IV advanced reactor concepts. Predicting heat transfer in these systems accurately and reliably is one major challenge. Another is ensuring the safety of these systems during …
-
MICROSTRUCTURE, MECHANICAL PROPERTIES, AND ION IRRADIATION OF NI-BASED ALLOYS FOR MOLTEN FLUORIDE SALT APPLICATIONS
… for high temperature applications, including for fluoride-salt-cooled nuclear energy systems such as molten salt reactors (MSRs) and fluoride-salt-cooled high temperature reactors (FHRs). These energy systems’ upper-operating temperature is limited by available structural materials options. Legacy …
-
Validation Studies of Single-Phase Natural Circulation Response of the Fluoride salt-cooled High-temperature Reactor (FHR)
… in designing the decay heat removal system for a Fluoride salt-cooled High-temperature Reactor (FHR). The loop of interest operates with a single phase, near ambient pressure molten salt coolant. Most of the codes used for LWR safety and licensing were designed to model more complex heat transfer …
-
Fluid Flow and Heat Transfer Characteristics of High Prandtl Number Fluids for Fluoride-Salt-Cooled Reactor Applications
Fluoride-salt-cooled high-temperature reactors (FHRs) are a new and developing class of reactors that features low-pressure liquid fluoride salt cooling and the graphite-matrix coated-particle fuel developed for high temperature gas reactors (HTGRs) and are designed for a high-temperature power …
-
Fuel cycle cost and fabrication model for fluoride-salt high-temperature reactor (FHR) "Plank" fuel design optimization
The fluoride-salt-cooled high-temperature reactor (FHR) is a novel reactor design benefitting from passive safety features, high operating temperatures with corresponding high conversion efficiency, to name a few key features. The fuel is a layered graphite plank configuration containing enriched …
-
Methodology for Coupled Reactor Physics, Thermal Hydraulics, and Depletion of a Fluoride Salt-Cooled High-Temperature Reactor (FHR)
… on Generation IV designs, which includes molten salt technologies. One type of molten salt reactor with a solid fuel form is a fluoride salt-cooled high-temperature reactor. A prismatic fuel design of this type is the Advanced High Temperature Reactor (AHTR). AHTR uses hexagonal fuel assemblies …
-
Design and Feasibility Study of an Air-Cooled Reactor Cavity Cooling System for Fluoride-Salt-Cooled High-Temperature Reactors
Licensing efforts for Fluoride-Salt-Cooled High-Temperature Reactors (FHRs) are dependent on passive safety systems designed for decay heat removal, yet no prior study has evaluated an air-based Reactor Cavity Cooling System (RCCS) for this role. This thesis addresses that gap by determining …
-
Analysis of Double-Wall and Twisted-Tube Heat Exchanger Concepts for use in Fluoride Salt-Cooled High-Temperature Reactors
Fluoride Salt-cooled High-temperature Reactors (FHRs) are an attractive fourth generation reactor concept. Like other fourth generation concept designs, FHRs offer characteristics such as a high-temperature low-pressure molten salt coolant allowing the reactor to be combined with a high-temperature …
-
The influence of surface tension on F2-Bubble Morphology at detachment from carbon electrodes in KF-2HF molten fluoride salt
… on amorphous carbon electrodes in KF-2HF molten salt to study the effect of surface tension (ϒ) on the profile of a bubble. F2 is used for the purification and enrichment of fuel in the nuclear industry. Its generation is energy-intensive because of electrical resistances caused by the adhesion …
-
Dynamic Modeling and Simulation of a Power Generation Steam Rankine Cycle for a Fluoride Salt-Cooled High-Temperature Reactor Nuclear Power Plant
Nuclear Fluoride Salt-Cooled High-Temperature Reactors (FHRs) have the potential to greatly improve nuclear technology in terms of safety and cost. By combining molten salt coolant technology from the Molten Salt Reactor (MSR) and TRISO fuel technology from the Very High Temperature Gas Reactor …
-
DESIGN AND ANALYSIS OF AN INTERMEDIATE HEAT EXCHANGER AND PASSIVE DECAY HEAT REMOVAL SYSTEM FOR A GENERIC FLUORIDE SALT-COOLED HIGH-TEMPERATURE REACTOR APPLICATION
Generation IV reactors, such as the Fluoride salt-cooled High-temperature Reactor (FHR), feature efficient heat transfer and passive heat removal systems. However, accurately predicting thermal behavior under steady-state and transient conditions remains challenging. This work designs and evaluates …
-
Corrosion Behavior of High Entropy Alloys in Molten Chloride and Molten Fluoride Salts
… new paradigm in structural alloy design. Molten salt corrosion behavior was studied for single-phase HEAs such as TaTiVWZr and HfTaTiVZr, and multi-phase HEAs such as AlCoCrFeNi2.1. De-alloying with porosity formation along the exposed surface and fluxing of unstable oxides were found to be …
-
Stylized Benchmark Description and Reference Solutions for the Pin-Fueled Small Modular Advanced High Temperature Reactor
… Laboratory (ORNL) preconceptual design of a fluoride-salt cooled Small modular Advanced High Temperature Reactor (SmAHTR). The SmAHTR preconceptual design details a small scale, transportable reactor of 19 prismatic assemblies which utilize tri-isotropic (TRISO) particles of Uranium …
-
THERMAL-HYDRAULICS MODELING AND SAFETY ANALYSIS OF ADVANCED REACTOR SYSTEMS
… advanced reactors, such as liquid metals, molten salts, and gases. In addition, thermal-hydraulic and neutronic simulations during transients is also an important step in forwarding advanced reactors and demonstrating favorable reactor and safety response to postulated accidents. This work focuses …
Page 1 of 3