Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 30 for “"Fluorinated Polymers"”.
-
Elemental fluorination : the synthesis of fluorinated polymers, organometallics and organic molecules
… up to 1500 amu. The functional groups of the perfluorinated vii difunctional polyethers are di-carboxylic acid, di-carboxylate, di-amide, di-chloride, di-hydride, di-alcohol, di-ethyl thioester, di-cyanoethyl ether, di-hydroxyethyl ester and di-acid chloride all with symetrical end groups. I was …
-
Preparing and Using Hydrophobic Fluorinated Polymers for Corrosion Protection on Aluminum Substrate
… aluminum alloys and the surrounding environment. Fluorinated polymers that were used in this study exhibit excellent properties which make them good candidates for corrosion protection applications. These properties include high hydrophobicity which is responsible for repelling oxygen and water …
-
Miscibility, interactions and surface properties of blends involving fluorine-containing polymers, C60-containing polymers or polycarbonates
… interactions and surface properties of some fluorinated polymer blends were studied by DSC, FTIR, XPS, ToF-SIMS and contact angle measurements. Generally, fluorinated polymers are immiscible with non-fluorinated polymers. However, upon the introduction of suitable functional groups, the …
-
Atomistic Simulations of Bonding, Thermodynamics, and Surface Passivation in Nanoscale Solid Propellant Materials
… with the GPW method. It is confirmed that fluorinated polymers bind to both Al(111) and Al(100) at two Al surface sites. The oligomers HCOOH, CH3CH2COOH, and CF3CF2COOH chemisorb onto Al(111) with adsorption energies of 10-45 kcal/mol. The preferred contact angle for the organic chains is …
-
The Synthesis and properties of functionalised polymers
The aim of this project was to synthesise fluorinated polymers that might act as hot material in a guest-host system for use in non-linear optical applications. These polymers would be expected to have the advantage over materials such as poly(vinylidene fluoride) which is known to be incompatible …
-
Corrosion of Common Heat Exchanger Materials by Lithium Nitrate Trihydrate
… understanding of corrosion of metals and polymers in high salt content solutions (wH2O < 0.50) is relatively limited. Here, we report the effects of six month immersion corrosion studies on nine common polymeric materials and twelve metallic alloys in molten LNH along with likasite, a …
-
Studies Toward Highly Fluorinated Polyphenylenes by Diels-Alder Polymerization
… (DAPPs) are chemically and thermally stable polymers, used for dielectric resins, gas separation membranes, and fuel cell proton exchange membranes. Highly fluorinated DAPPs are expected to have better thermal stability and chemical resistance, higher glass transition temperatures, improved …
-
Σχηματοποίηση επιφανειών με πολυμερικά φωτοευαίσθητα υλικά για βιο-εφαρμογές
… processing of organic materials such as fluorinated polymers and solvents has found applications in polymeric semiconductors and provides the ideal material system for discovering new patterning methods. Photolithography although is a common patterning technique that allows high …
-
Fundamentals of gas sorption and transport in thermally rearranged polyimides
Thermally rearranged polymers are formed from the solid-state thermal reaction of polyimides and polyamides that contain reactive groups ortho position to their diamine. These polymers have shown outstanding transport properties for gas separation applications. The thrust of this work is to …
-
Thermo-Oxidative Behavior of PTMG and PPG Based Polyurethane-Ureas With Varying Degree of Fluorination
<p>The thermo-oxidative behavior of ether based fluorinated polyurethane elastomers was assessed. For achieving this goal, samples were exposed to high temperatures (118±3<sup>o</sup>C) for periods of up to eight weeks. The chemical structure changes were monitored through infrared spectroscopy and …
-
Solid phase direct fluorination
… possible. The vacuum pyrolysis mass spectra of polymers of varying fluorine contents are now reported. Several characteristic stages of fluorination can be identified. The superior thermal stability of fluorinated polymers is demonstrated using differential scanning calorimetry. DSC curves were …
-
Photochemistry applied in optical lithography Use of spectroscopic and imaging techniques for the characterization of chemical processes in thin polymer films
… Hydrofluoric acid (HF) was detected in films of fluorinated polymers exposed to laser radiation at 157 nm, using a fluorescent sensor especially designed and synthesized in the group. The influence of laser radiation on the polymer film was studied using pyrene as fluorescent probes sensitive to …
-
Fundamental Study of Free Volume Characteristics on Membrane H2/CO2 Separation
… superior gas separation performance, including fluorinated polymers for He/gas and gas/CH4 separations, and polar polymers and mixed-matrix materials comprising metal-organic frameworks for olefin/paraffin separations. On the other hand, Diffusivity selectivity is governed by the relative …
-
Fluorotelomer-Based Acrylate Polymers as an Indirect Source of Perfluoroalkyl Carboxylates
Fluorotelomer-based acrylate polymers (FTACPs) are a class of side-chain fluorinated polymers that have been widely used as surface protectants in textile, upholstery and paper industries. Despite FTACPs constituting the largest fraction of commercial fluorotelomer products, little is known about …
-
FUNDAMENTAL AND APPLICATION OF SURFACE-INITIATED ATOM TRANSFER RADICAL POLYMERIZATION FOR SURFACE MODIFICATION OF SHEETS AND NANOPARTICLES
… of reactive metal surfaces. </p> <p> Both of fluorinated polymers and polyhedral oligomeric silsesquioxane (POSS)-containing polymers have very interesting properties. In this thesis, for the first time, a highly fluorinated monomer, 2,2,2-trifluoroethyl methacrylate (TFEMA) and a …
-
Advanced Polymeric Membranes and Multi-Layered Films for Gas Separation and Capacitors
… ether ketone)s was compared. Two of the polymers had symmetric bisphenols while the remaining two had asymmetric bisphenols. Two contained trifluoromethyl groups while the other two had methyl groups. The symmetric polymers had Tg's of approximately 160 °C while the asymmetric polymers …
-
Liquid Crystalline Brush-like Imidazolium Co-polymer Membranes For Energy Conversion
… used polymer backbones are polysulfones and fluorinated polymers, Nafion being the most popular. Nevertheless, literature has highlighted a few major drawbacks of polymer membranes synthesized with these. Polysulfones are susceptible to ether and quaternary carbon hydrolysis and polyfluorines …
-
Applied Materials And Methods For Surface Modification
… By tailoring the functionalities of the polymers, desirable properties such as antifouling behavior and enhanced solubility can be specifically designed and achieved. These as-modified functional materials can be successfully applied to complex working environments, indicating the methods …
-
Development Of Peptide-Based 19F Mri Tracers And Mr-Based Thermometry Sensors
… limits. In addition to perfluorocarbon and fluorinated polymers, fluorinated peptides offer an additional strategy for creating sequence-defined ¹⁹F MRI imaging agents with high fluorine signal. The first part of this dissertation gives a general introduction of ¹⁹F MRI as one molecular …
-
NONCOVALENT FLUOROUS INTERACTIONS: NEW APPROACHES FOR DRUG DISCOVERY AND DRUG DELIVERY
… which makes fluorocarbons lipophobic. Therefore, fluorinated compounds show an amphiphilic character that leads to the formation of the fluorous phase, which is separated to both aqueous and organic layers. The aim of my project was applying the strong and noncovalent fluorous interactions to drug …
Page 1 of 2