Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 28 for “"Fly Ash Replacement"”.
-
Effect of fly ash replacement on alkali and sulphate resistance of mortars
The use of fly ash as a supplementary cementing material in concrete and mortar has dramatically increased in recent years due to its improvement of concrete and mortar properties and its environmentally friendly impact. In this thesis, the sulfate resistance and alkali-silica reaction in mortars …
-
The Effects of Elevated Temperatures on the Strength Development of High Strength Concrete with Fly Ash
… of elevated temperatures in which high strength fly ash concrete is mixed and cured shall be examined in this thesis. An experimental study was conducted to determine the strength development of high strength concrete (HSC) with and without fly ash when subjected to different hot weather mixing …
-
An Investigation into the Effect of Performance Engineered Mixture (PEM) Design on the Workability and Strength of Concrete Pavement Mixtures
… cementitious materials (SCMs) such as fly ash. The study presented in this paper aims to demonstrate how the use of the Tarantula Curve can be used to design concrete mixtures with reduced cement contents while maintaining sufficient workability for concrete mixtures to be used for …
-
Alkali-silica reactivity and ionic transport in mortar with hydrophobic inclusions.
… 46% and 38% reductions in ASR expansion for washed and non-washed hydrophobic aggregates, respectively. Microstructural analysis revealed that hydrophobic coatings effectively reduced alkali transport to reaction sites while delaying crack initiation. The second objective compared varied …
-
An Investigation of the Effect of Performance Engineered Mixture (PEM) Design on Durability and Air Void Matrix of Concrete Pavements
… followed by the same two mixtures with fly ash replacement of cement. A “truly” optimized aggregate mixture with fly ash replacement of cement. And finally, two mixtures with increased air contents. There was a mixture with solely #57 aggregate, a mixture with a blend of #57 and #7 …
-
Effect of heat generation from cement hydration on mass concrete placement
… this research is to explore the potential use of fly ash as Type IV cement replacement in Korea concrete dams and to determine the proper lift thickness of concrete blocks in dam construction. In the present study, the chemical compositions and fineness of cement and fly ash are characterized. The …
-
Development of High Performance Concrete for Use on Tennessee Bridge Decks and Overlays
… of this study. Mix 2F1 (dense-graded with 25% fly ash replacement) was found to meet all performance characteristics and was chosen because it has possible economic savings.</p>
-
Verifying the Calcium Oxychloride Threshold in Cementitious Pastes
… over time in paste specimens exposed to CaCl2. Fly ash is used to replace cement (up to a 50% mass replacement) in order to limit CAOXY deterioration. While compressive strength reduction was observed in all specimens despite fly ash replacement level, the results generally validate the current …
-
Setting behavior and shrinkage of high performance pavement concrete: Effect of supplementary cementitious materials, chemical admixtures and temperature
… (ASTM Types B and D) and with 0 or 20% Class C fly ash replacement for Type I cement. The initial and final set times of these mixtures were measured by the penetration resistance method according to ASTM C 403. The temperature rise of the mixtures was monitored using a thermal couple, and the …
-
Effects of Lithium Nitrate Admixture on Early Age Concrete Behavior
… examined alone and with 20% by weight Class F fly ash replacement. Results indicate that the hydration of the tricalcium silicate and tricalcium aluminate components of cement are accelerated by the use of LiNO3, and that low alkali cements (typically specified to avoid damage by ASR) may be …
-
Activated hybrid cementitious system using Portland cement and high volume Colombian fly ash with sodium sulfate
… cementitious systems, including high volume fly ash with high loss on ignition (LOI) content and sodium sulfate as activator, are studied to explore more sustainable alternatives to Portland cement (PC) for reducing CO2 emissions in the concrete industry. Most of the background of this …
-
Automated crack control analysis for concrete pavement construction
… and concrete mixture characteristics such as fly ash replacement (FA) and cement factor (CF). Both of these significantly affect sawcut timing and depth requirement. The determination of crack initiation is based on fracture mechanics. Estimation of the time of cracking is based on predicted …
-
Evaluation of concrete mixing and its effects on portland cement concrete (PCC) properties
… mix proportions, C4 mix, C4-C (with class C fly ash), and C4-WR (with water reducer), are used to reflect the material effect. It is observed that fly ash replacement for Portland cement and addition of water reducer both reduce the air void spacing factor of concrete. Insufficient mixing …
-
Performance of No Vibration/No Admixture Masonry Grout Containing High Replacement of Portland Cement with Fly Ash and Ground Granulated Blast Furnace Slag
… proportions of Portland cement with Type F fly ash and/or ground granulated blast furnace slag (GGBFS). The percentages of Portland cement replacement evaluated were 0%, 50%, 60%, and 70% for Type F fly ash. The percentages of Portland cement replacement evaluated were 0%, 60%, 70% and 80% …
-
Surface and microstructural properties of photocatalytic cements for pavement applications
… curtailed by replacing some of the cement with fly ash or increasing TiO2 content by mass of cement. Spectrophotometer testing showed that reflectance of the mortar samples also factored into photocatalytic performance. More reflective specimens demonstrated greater NOx removal ability, which …
-
The Influence of the Binder Type & Aggregate Nature on the Electrical Resistivity and Compressive Strength of Conventional Concrete
… of the coarse aggregate nature and binder replacement/amount on the concrete ER and compressive strength predictions models through ER. Twenty-four concrete mixtures were developed with two different coarse aggregate natures (i.e. granite and limestone), two different water-to-binder ratios …
-
Self-Consolidating Concrete Design for Drilled Shaft Structural Applications
… mixtures were developed both with and without fly ash replacement. These mixtures were then used to compare how SCC performed relative to traditional slump concrete in drilled shaft applications. The SCC mixtures also contained different aggregate sizes (#7 and #57), blended in multiple ratios. …
-
Strength of Concrete Masonry Prisms Constructed with Non-Traditional Grout and Type-M Mortar
… can replace ordinary Portland cement. For an all fly ash replacement, up to 40% of Portland cement can be replaced while up to 70% can be replaced by a fly ash-slag combination. Research is focused on class F fly ash and ground granulated blast furnace slag replacing Portland cement in larger …
-
Engineering properties of high performance concrete containing large volume of Class C fly ash
This investigation for the use of large volume of fly ash in concrete in combination with superplasticizer, was for the purpose of optimizing its mechanical properties while reducing its cost. Several concrete mixtures using coarse/fine aggregate ratio of 1.22 and aggregate/binder ratio of 5.1 were …
-
Pozzolanic Properties of Biomass Fly Ash
… stream, problems with waste disposal arise. Coal fly ash, a by-product of coal power production, has beneficial strength and durability properties when used as a cement replacement material. This study examined strength and durability characteristics of mortar and concrete samples containing …
Page 1 of 2