Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 65 for “"Foaming process"”.
-
A Novel Plasma Treatment Based Solid-State Foaming Process for Producing Skinless Foams
Solid‑state foaming (SSF) reliably produces micro‑ and nanocellular polymer structures but consistently forms a dense, unfoamed surface layer (skin) due to CO₂ desorption near free surfaces. This work investigates novel atmospheric‑pressure plasma jet (APPJ) processing as a surface‑treatment …
-
Simulation aided analysis and experimental study of polyurethane polymerization reaction and foaming process /
… and catalytic reactions. This research process places high demands on identifying and testing highly-impactful fundamental mechanisms during polymerization that have not previously been identified.
-
Development of a laser foaming process for high throughput three-dimensional tissue model devices
… ones in vivo. In this study, a novel fabrication process, named selective laser foaming, was developed to create localized 3D porous structure on a polymer chip. The effects of laser power and lasing time on the porous structure were studied both experimentally and through finite element modeling. …
-
Preparation of biodegradable polymeric scaffolds with porosity gradients and interconnected structures using a sub critical carbon dioxide foaming process
… very small pores (i.e. d<10mum) were prepared by foaming multilayered films of poly (dl-lactic-co-glycolic acid) (PLGA 50/50), poly &egr;-caprolactone (PCL), poly (dl-lactic-co-caprolactone) (PLCL) and their blends. In order to improve the interconnectivity, a ternary system comprised of poly …
-
Development of polymeric foam materials with improved mechanical and acoustic properties
This thesis addresses the processing, morphology, mechanical properties, and acoustic properties of new polymeric foam materials. A batch foaming process, a rotational mold foaming process and a constrained mold foaming process were designed and applied in the producing of polymeric foams. …
-
Thermosetting curing systems modeling project
… 2 is the study on preheating impact on urethane foaming process with assistance of modeling approach. Chapter 3 is the application of further developed model in simulation of epoxy/amine curing. According to related previous work, a modeling/simulation program using MATLAB software has been …
-
In-line measurement of solibility of physical blowing agents in thermoplastic melts as related to extrusion foaming
… solubility in thermoplastic melts in extrusion foaming equipment has been developed in this study. This method uses video microscopy in connection with a foaming extruder (single or twin-screw) to generate solubility data by observing the onset of gas bubble formation/dissolution. This method …
-
Controlled Foaming on Cereal Protein
… density, strength and texture. Thus, keeping the foaming process under control is fundamental. It can yield to different products, characterized by their own structure, but made up with the same materials. In this project a model foam system of a cereal prolamin protein, starch, plasticizer and …
-
Polyurethane rigid foams modeling project
… model was developed to simulate the polyurethane foaming process for a rigid foam. In the model, multiple ordinary differential equations were solved by MATLAB and the model was able to predict temperature profiles by inputting foam recipe information. This initial study on foam modeling focusses …
-
Exploration of Additively manufactured Microcellular PLA
… comparing it with the solid-state microcellular foaming process. The study examines the impact of various 3D printer nozzle temperatures (180°C to 210°C) and CO2 saturation pressures (1 MPa to 4 MPa) on the mechanical properties of PLA. The study reveals that when PLA sheets are 3D printed and …
-
Multi-Physics Simulation of Foaming Phenomena
… of numerical models for the simulation of foaming phenomena. Different simulation techniques, including the lattice Boltzmann method, molecular dynamics, and the immerse boundary method, are explored to develop a an improved 1D Cell Model, as well as a comprehensive 2D/3D numerical model …
-
Desarrollo de formulaciones para la fabricación de espumas de poliolefina reticulada de celdilla abierta en un proceso de espumado en continuo. Estudio de la relación formulación estructura-propiedades
… of chemical formulations and technical processes for the production of open-cell cross-linked polyolefin foams using a continuous foaming process. These foams stand out for their open internal structure, which gives them unique properties such as air and fluid permeability, flexibility …
-
A study of polyurethane polymerization via modeling and experiment
… program has been developed to model urethane foaming processes for the purpose of better understanding the foaming process and to advance simulation as a method to develop new foam formulations. As part of the verification of this model, isocyanate reaction profiles were followed for reactions …
-
ASSESSMENTS OF LOW EMISSION ASPHALT MIXTURES PRODUCED USING COMBINATIONS OF FOAMING AGENTS
The asphalt foaming techniques have been used over the last couple of decades as an alternative to the traditional method of preparing asphalt mixtures. Based on positive feedback from the industry, this study was initiated to explore and evaluate the performance of the Warm Mix Asphalt (WMA) …
-
Novel Manufacturing Processes for Polymer Bead Foams
… bead foams are manufactured through a sintering process using foamed polymer beads. It is worth emphasis that the bead foam technology is the only process that can produce 3-dimensionally shaped foam products with ultra-low densities. This unique feature of bead foam process has been attracting …
-
Characterization of Aging and Foaming Properties for Asphalt Mixtures
… (WMA) in the United States. While asphalt foaming has become the most popular method for producing WMA, concerns remain about the performance of foamed asphalt mixtures due to the use of water in the foaming process. Along with the advent of WMA, recent changes in asphalt mixture components …
-
Benign Processing of High Performance Polymeric Foams of Poly(arylene ether sulfone)
… of high performance polymer foams via a benign foaming process. The first goal of this project was to develop a process and the conditions necessary to produce a low density (>80% density reduction) foam from poly(arylene ether sulfone) (PAES). Water and supercritical carbon dioxide (scCO2) were …
-
Saturation and foaming of thermoplastic nanocomposites using supercritical CO2.
… were foamed in a batch supercritical CO2 process at various temperatures and pressures from 60°-85°C and 7.6-12MPa. The resulting foams were analyzed by scanning electron microscopy to determine effect of MLS on cellular morphology. Differential scanning calorimetry was used to determine …
-
Development of High-temperature Thermoplastic Foams: Investigation on Foaming Behaviors of Sulfone Polymers
… the environmental footprint of manufacturing processes. Despite the economic and the environmental advantages of high temperature polymeric foams, the development is still at its inception. There is a limited number of studies on the foaming of high temperature polymers and the majority are …
-
Design of a dynamic covalent composite network for smart reprocessable shape memory systems
… and actuators due to their low cost, easy processing, low density and large recoverable strains. In addition, improvement of their stiffness can be achieved by combining a shape memory polymer with various fillers leading to shape memory composites. Advantageously, the judicious selection …
Page 1 of 4