Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 68 for “"Food Engineering"”.
-
Enabling computer-aided food engineering: mechanistic models and their deep learning surrogates
The modern food industry faces the critical challenge of developing products that are safe, nutritious, and sustainably produced while maintaining consistent quality under diverse processing conditions. Achieving this balance requires not only empirical knowledge but also a mechanistic …
-
Development of an in-line CIP sensor : a dissertation submitted in partial satisfaction of the requirements for the degree of Masters of Technology in Food Engineering
The need to spend a few hours cleaning milk powder plants at least once every 24 hours is the cause of a significant amount of downtime for a plant. This downtime is worth millions of dollars of lost production time to the New Zealand dairy industry each year. Optimisation of the cleaning-in-place …
-
Whole milk fouling of heated surfaces : a thesis presented in partial fulfilment of the requirements for the degree of Master of Technology in Food Engineering at Massey University
Whole milk fouling of surfaces within dairy products processing plants, especially that which occurs on heat treatment equipment, is an important operating problem, threatening the quality of product and reducing thermal and mechanical efficiency of equipment. A fouling monitoring system was …
-
Mathematical modelling for design of horticultural packaging : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Food Engineering at Massey University
… across a range of typical horticultural food cooling and storage operations. Nevertheless, areas for possible improvement are identified. The models may be applicable beyond horticultural commodities, but require testing for other products to substantiate this.
-
Modelling of a direct osmotic concentration membrane system : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Food Engineering at Massey University
Direct osmotic concentration (DOC) is a novel continuous membrane process. Two co-current streams, separated by a semi-permeable membrane, are recycled through a DOC module. The turbulent-flow dilute juice stream is concentrated by osmotically extracting water across the membrane into a …
-
Rheological characterisation of age thickening in milk concentrates : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Food Engineering at Massey University
This project investigates the time-dependent rheological behaviour of fresh and reconstituted milk concentrates. New experimental protocols, including sampling and measurement techniques, as well as equipment calibration and data analysis procedures were developed for both the industrial surveys …
-
Studies of UHT-plant fouling by fresh, recombined and reconstituted whole milk : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Food Engineering
The objective of this study was to investigate the effects of preheat treatments on fouling by fresh whole milk (FWM), recombined whole milk (RCB) and reconstituted whole milk (Recon) in the high-temperature heater of indirect UHT plants. Various preheat treatments prior to evaporation during milk …
-
Aspects of fouling in dairy processing : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Food Engineering at Massey University, Palmerston North, New Zealand
Fouling of heat treatment equipment in the dairy processing industry is an expensive and persistent problem. The objective of this work was to develop a better understanding of the mechanisms of dairy fouling in heat exchangers and identify methods to control this build-up. This was part of a …
-
Mathematical modelling of bread dough sheeting : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Food Engineering at Massey University, Palmerston North, New Zealand
Bread dough sheeting is an important operation in the bread making industry. The process involves the passing of a mass of dough between two, or more, rotating rollers. The function of sheeting can be: i) to shape the dough, ii) to laminate layers of product together or iii) to develop the gluten …
-
Significant factors affecting horticultural corrugated fibreboard strength : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Food Engineering at Massey University, Palmerston North, New Zealand
The New Zealand kiwifruit and apple industries export the two largest horticultural crops by value and tonnage on long sea routes to distant markets. The long storage and shipping times, low temperature (~0°C) and high humidity (>70 %RH) conditions require boxes manufactured from high performance …
-
Prediction of chilling rates for food product packages : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Food Engineering at Massey University, Palmerston North, New Zealand
Many food product packages contain significant air void fractions in which natural convection and radiation heat transfer occurs. This may significantly affect the cooling rate of the package as a whole. Voids tend to be either rectangular (at the top of the package), approximately triangular (e.g. …
-
Prediction of the thermal conductivity of porous foods : a thesis submitted in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Food Engineering, Massey University, Palmerston North, New Zealand, 2002
A review of the food engineering literature exposed a paucity of information in the area of effective thermal conductivity prediction for porous foods. No useful guidelines were found that could advise a food engineer on the selection of appropriate effective thermal conductivity models for this …
-
A systematic approach for developing and manufacturing fruit simulators : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Food Engineering, Massey University, Palmerston North, New Zealand
Due to the high cost, variable nature and seasonal availability of fruit, conducting large scale experiments for research purposes is not easy. A fruit simulator is a physical tool that mimics the mechanistic features and properties of the targeted fruit; hence, it can be used as a replacement for …
-
Mathematical modelling of salt diffusion in dry-salted cheese : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Food Engineering at Massey University, Manawatu, New Zealand
Control of salt uptake into cheese curds is vital to the production of safe, functional, and consistent cheese products. Development of mathematical models describing the mechanisms affecting salt uptake, namely the Fickian diffusion of salt into curds and osmotic pressure differential induced whey …
-
Effect of homogenisation on milk fouling in a tubular heat exchanger : a thesis presented in partial fulfilment for the requirements for the degree of Master of Food Engineering, Massey University, Palmerston North, New Zealand
Fouling of equipment surfaces in milk processing has been a costly problem for many years. In spite of an increasing body of knowledge of the fouling mechanism, the problem is not fully understood yet. Recent investigations suggest that the role of fat in whole milk fouling seems to be very …
-
Thermophiles and fouling deposits in milk powder plants : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Food Engineering and Technology at Massey University, Palmerston North, New Zealand
Fouling deposits were suspected of playing a pivotal role in the thermophile contamination problem experienced in the dairy industry during milk powder manufacture. The objective of this work was to investigate thermophile growth and develop an understanding of how fouling deposits affect …
-
Electromicrofiltration for separation of mineral particles in dairy processing : a thesis presented in partial fulfilment of the requirement for the degree of Master of Technology in Food Engineering in the Institute of Food, Nutrition & Human Health, Massey University, Albany campus, New Zealand
Electromicrofiltration, where an external electric field is imposed on a traditional microfiltration unit, has been studied for several years. Reports in this field have covered the filtering separation of china clay, kaoline, anatase and a surfactant from water. Some recent investigations …
-
A CFD modelling system for air flow and heat transfer in ventilated packing systems during forced-air cooling of fresh produce : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Food Engineering at Massey University
Forced-air cooling is the common method for precooling horticultural produce. Ventilated packaging systems are often used to facilitate cooling efficiency. A computational fluid dynamics (CFD) modelling system was developed to simulate airflow and heat transfer processes in the layered and bulk …
-
Culinology applications to a convenient and economic frozen dinner set
With the rising demand for convenient foods, there usually comes a decrease in quality. Combining the work of food science with culinary arts may result in a food product that is both convenient and economic without having to sacrifice any sensory characteristics. In this study, a culinary arts …
Page 1 of 4