Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 69 for “"Force Coefficient"”.

  1. Analysis of the dynamic cutting force coefficient

    … in this thesis that the Dynamic Cutting Force Coefficients, as measured by the Double Modulation Method, do indeed represent the transfer function of the cutting process. Limits of stability, computed from the measured DCFCs for various steels and the measured transfer function of a …

    mcmaster Repository record for Analysis of the dynamic cutting force coefficient (opens in a new tab)

  2. Lateral Dynamics of Multiple Trailer Trucks in Windy Environments

    … configuration differed by the aerodynamic side-force coefficient for the trailers. Each load configuration consisted of reducing the payload in a single trailer. The tractor was identically defined for each load and aerodynamic configuration. Increasing the aerodynamic side-force coefficient for …

    clemson Repository record for Lateral Dynamics of Multiple Trailer Trucks in Windy Environments (opens in a new tab)

  3. Optimized Engine Out Procedures to Extend the Range of Jet Transport Airplanes

    … by the zero slip position. By comparing the drag force coefficient obtained at the sideslip position that occurs due to an engine failure with the drag force coefficient obtained at the wings level condition for each airplane, the amount that their specific range will increase was determined.

    embry-riddle Repository record for Optimized Engine Out Procedures to Extend the Range of Jet Transport Airplanes (opens in a new tab)

  4. Transonic and Supersonic High Alpha Flow Prediction and Control for an SC-X Space Vehicle

    … of large oscillations of lift, drag and side force coefficients reflects the transonic flow characteristics. The transverse-shock interaction and shock-shifting phenomena were captured at the cone-cylinder juncture. In supersonic flow regime, the periodic vortex shedding was captured. The …

    odu Repository record for Transonic and Supersonic High Alpha Flow Prediction and Control for an SC-X Space Vehicle (opens in a new tab)

  5. Automated identification of cutting force coefficients and tool dynamics on CNC machines

    … depth of cuts require to have material's cutting force coefficient and frequency response function (FRF) of the machine at its tool tip. The cutting force coefficients are estimated from the cutting force measurements collected through dynamometers in laboratory environment. The thesis presents an …

    ubc Repository record for Automated identification of cutting force coefficients and tool dynamics on CNC machines (opens in a new tab) Download PDF for Automated identification of cutting force coefficients and tool dynamics on CNC machines (opens in a new tab)

  6. Experimental investigation of the flow field about sharp-edged delta and rectangular wings

    … in the present research and the overall normal force coefficient was obtained by the graphical integration of surface pressures. It was found from the pressure distributions that the flow pattern changes from one type to another in the range from ∝= 10° to ∝= 15°. The overall normal force …

    ubc Repository record for Experimental investigation of the flow field about sharp-edged delta and rectangular wings (opens in a new tab) Download PDF for Experimental investigation of the flow field about sharp-edged delta and rectangular wings (opens in a new tab)

  7. Airfoil selection for a small-scale vertical axis wind turbine : a numerical study

    … Our approach is to focus on the tangential force employed in the selection of the airfoil. To do so, an approach was developed using MATLAB software to use NACA four-digit algorithm to generate the geometry of the airfoil and, then by the implementation of Xfoil V6.99 to the code, the values …

    reykjavik Repository record for Airfoil selection for a small-scale vertical axis wind turbine : a numerical study (opens in a new tab)

  8. Hydrodynamic and Mass Transport Properties of Microfluidic Geometries

    … using simplified transport equations and static force balances. This is possible because the length scales of these geometries ensure low Re conditions approaching the Stokesian limit, where the flow profile is laminar, viscous forces are dominant and inertial forces are negligible. This work …

    cuny-grad Repository record for Hydrodynamic and Mass Transport Properties of Microfluidic Geometries (opens in a new tab)

  9. An Experimental Investigation of a Goldschmied Propulsor

    … is intended to use energy to reduce the axial force on the body by eliminating separation and increasing the pressure recovery aft of the body’s maximum thickness. The goal of the current project was to design, fabricate, and fully document the performance of a wind tunnel model incorporating …

    calpoly Repository record for An Experimental Investigation of a Goldschmied Propulsor (opens in a new tab)

  10. The Effect of a Splitter Plate on the Flow around a Surface-Mounted Finite Circular Cylinder

    … in a low-speed wind tunnel using a force balance and single-component hot-wire anemometry. Four circular cylinders of aspect ratios AR = 9, 7, 5 and 3 were tested for a Reynolds number range of Re = 1.9×10^4 to 8.2×10^4. The splitter plates had lengths, relative to the cylinder …

    sask Repository record for The Effect of a Splitter Plate on the Flow around a Surface-Mounted Finite Circular Cylinder (opens in a new tab)

  11. An investigation of a jet in a crosswind

    … was integrated numerically to provide a surface force distribution about the jet, a suction force coefficient, a pitching moment coefficient and the centre of pressure. The results are summarised by presenting the variation of the suction force coefficient, centre of pressure, pitching moment …

    glasgow Download PDF for An investigation of a jet in a crosswind (opens in a new tab)

  12. Modeling and validation of a subscale aerobatic aircraft configuration in spin

    … of a new analytical model for calculating the forces on a stalled spinning wing, and validation of that model through wind tunnel tests. Significantly, these results are combined to form a new code, SpinSim, which assists with the six-degree-of-freedom (6DOF) simulation of the aerodynamics and …

    uiuc Repository record for Modeling and validation of a subscale aerobatic aircraft configuration in spin (opens in a new tab)

  13. The Aerodynamic and Dynamic Loading of a Slender Structure by an Impacting Tornado-Like Vortex: The Influence of Relative Vortex-to-Structure Size on Structural Loading

    … on the structure by the free stream, and maximum force coefficient amplitudes vary by more than 400% when the impinging vortex impacts the structure at different times. Maximum drag and lift force coefficient amplitudes reach asymptotic values as the impinging vortex’s size increases that are …

    arkansas Repository record for The Aerodynamic and Dynamic Loading of a Slender Structure by an Impacting Tornado-Like Vortex: The Influence of Relative Vortex-to-Structure Size on Structural Loading (opens in a new tab)

  14. An experimental investigation into the use of vortex generators to improve the performance of a high lift system

    … generators had an adverse effect on the normal force coefficient generated by the high lift system at incidences below the stall incidence of the cleanfoil, resulting from an increased displacement effect of the shear layers above the upper surface of the main wing. A system of co-rotating …

    city-london Download PDF for An experimental investigation into the use of vortex generators to improve the performance of a high lift system (opens in a new tab)

  15. Extreme Hydrodynamic Loading on Horizontal Pipelines

    … understanding of the exerting hydrodynamic forces. Understanding the hydrodynamic forces acting on pipelines is vital in ensuring their safe operation and avoiding potential damage to the environment. The American Society of Civil Engineers (ASCE), in its ASCE7 Chapter 6: Tsunami Loads and …

    ottawa-retro Repository record for Extreme Hydrodynamic Loading on Horizontal Pipelines (opens in a new tab)

  16. A minimum fuel minimum range error controller for a surface-to-surface missile

    … analysis were:</p> <p>1 . drag or axial force coefficient, C<sub>A</sub>;</p> <p>2. lift or normal force coefficient, C<sub>N</sub>; 3. length from the tail to the center of mass;</p> <p>4. length from center of mass to center of pressure, X;</p> <p>5. thrust misalignment.</p> <p>The …

    utk-theses Repository record for A minimum fuel minimum range error controller for a surface-to-surface missile (opens in a new tab)

  17. Numerical Modelling of Steady and Unsteady Sail Aerodynamics

    A method for prediction of aerodynamic forces produced by a jib and main sail plan for steady and unsteady upwind conditions has been developed, and validated against experimental results. Computational fluid dynamics, with a RANS approach, is used to model the viscous ow on a stiff, model scale …

    chalmers Repository record for Numerical Modelling of Steady and Unsteady Sail Aerodynamics (opens in a new tab)

  18. Fluctuating lift on cylinders of rectangular cross section in smooth and turbulent flows

    … investigation of the fluctuating lift (or side force) coefficient on fixed two dimensional rectangular cylinders for various free stream turbulence intensities and scales. The measurements are made using turbulence producing devices such as grids and circular rods placed upstream of the …

    ubc Repository record for Fluctuating lift on cylinders of rectangular cross section in smooth and turbulent flows (opens in a new tab) Download PDF for Fluctuating lift on cylinders of rectangular cross section in smooth and turbulent flows (opens in a new tab)

  19. Large Eddy Simulation of a Simplifed Car Model Exposed to an Unsteady Harmonic Crosswind

    … effects. Then the evolution of the overall side force coefficient and yawing moment coefficient for the model are plotted and compared to experimental data obtained in the University of Tolouse. The differences are analyzed and recommendations for future studies and simulations are made. The …

    chalmers Repository record for Large Eddy Simulation of a Simplifed Car Model Exposed to an Unsteady Harmonic Crosswind (opens in a new tab)

  20. Reinforcement-learning control framework and sensing paradigm for flapping-wing micro aerial vehicles

    … for flapping-wing micro aerial vehicles. A reinforcement-learning control framework has been proposed as a suitable biomimetic candidate for control of micro aerial vehicles. This work also discusses a matching sensing paradigm as a byproduct of the control approach. The control framework is …

    ubc Repository record for Reinforcement-learning control framework and sensing paradigm for flapping-wing micro aerial vehicles (opens in a new tab) Download PDF for Reinforcement-learning control framework and sensing paradigm for flapping-wing micro aerial vehicles (opens in a new tab)

Page 1 of 4