Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 118 for “"Force transducer"”.

  1. A Compressive Force Transducer For Use On Rocket Sleds.

    … testing a good method of measuring compressive forces, often under the most adverse field conditions, has been sought many times over. Several methods, both direct and indirect, have been used to attempt to define such compressive loads. Some are universally successful, but often a method has to …

    unm Repository record for A Compressive Force Transducer For Use On Rocket Sleds. (opens in a new tab)

  2. A Three-Component Force Transducer for Monorail Rocket Sleds

    A three-component force transducer which permits measurement of the vertical force, the cross-track force, and the roll moment about an axis parallel to the track was developed for use on monorail rocket sleds. For this force system it was found that the maximum allowable load for both the vertical …

    unm Repository record for A Three-Component Force Transducer for Monorail Rocket Sleds (opens in a new tab)

  3. Development of a novel cell traction force transducer based on cholesteryl ester liquid crystals. Characterisation, quantification and evaluation of a cholesteryl ester liquid crystal based single cell force transducer system.

    … or ability to detect localised cell traction forces (CTF) due to their non-linear viscous behaviour under shear rates. A newly developed cell traction force transducer system based on cholesteryl ester lyotropic liquid crystals (LCTFT) was developed to sense localised traction forces of human …

    bradford Repository record for Development of a novel cell traction force transducer based on cholesteryl ester liquid crystals. Characterisation, quantification and evaluation of a cholesteryl ester liquid crystal based single cell force transducer system. (opens in a new tab)

  4. A 6-DOF Force Transducer Design from an Existing Rocket Payload Attachment Fitting

    Lack of reliable in-flight data regarding the forces experienced by a spacecraft inside a Boeing Delta II rocket have led to the need for a simple and cost effective force measurement solution. This research investigates one solution that creates a direct reading force transducer to monitor the …

    odu Repository record for A 6-DOF Force Transducer Design from an Existing Rocket Payload Attachment Fitting (opens in a new tab)

  5. Measuring Dynamic Membrane Mechanical Properties Using a Combined Microfabricated Magnetic Force Transducer-Microaspiration System

    … the loading rate affects the observed threshold force at which a tether forms from a vesicle membrane. Tether dynamics are important to a myriad of biological processes such as signaling when white blood cells adhere to the walls of healthy and diseased blood vessels, or in the transport of …

    rice Repository record for Measuring Dynamic Membrane Mechanical Properties Using a Combined Microfabricated Magnetic Force Transducer-Microaspiration System (opens in a new tab)

  6. The Development and Use of an Intraoral Force Transducer in the Diagnosis and Treatment of Myasthenia Gravis

    … this investigation was to fabricate an intraoral force transducer for measuring incisive biting force, and to test its usefulness in obtaining an objective and quantifiable evaluation of an "individual's myometric response during the standard diagnostic procedures. A cantilever beam force …

    iupui Repository record for The Development and Use of an Intraoral Force Transducer in the Diagnosis and Treatment of Myasthenia Gravis (opens in a new tab)

  7. Improved methods for characterising acoustoplasticity

    … and yet all rely fundamentally on accurate force and extension data. The effects of inertia and inhomogeneity in the loading distribution on the specimen have been largely ignored, and yet are incompatible with commonly used instrumentation. This thesis reports investigations which address …

    glasgow Repository record for Improved methods for characterising acoustoplasticity (opens in a new tab) Download PDF for Improved methods for characterising acoustoplasticity (opens in a new tab)

  8. Development of a Low-Cost Three-Axis Anemometer for Analysis of Various Wind Phenomena

    … are oriented and designed to decompose the wind force along each axis and eliminate cross-coupling between each axis. The IR sensor pair converts the physical displacement to a voltage to determine the velocity of the wind. The initial prototypes showed the concept to be favorable and led to …

    hawaii Repository record for Development of a Low-Cost Three-Axis Anemometer for Analysis of Various Wind Phenomena (opens in a new tab)

  9. A System for Measuring the Lift and Drag Forces of a Spinning Golf Ball Held Fixed Within a Wind Tunnel

    … golf ball is attached, connected to a two-axis force transducer. Additionally, an automated data acquisition system was built for enhanced precision of measurements. Data for wind speeds up to 160 ft/s and rotational speeds up to 8,600 rpm were obtained and analyzed. The purpose of the designed …

    calpoly Repository record for A System for Measuring the Lift and Drag Forces of a Spinning Golf Ball Held Fixed Within a Wind Tunnel (opens in a new tab)

  10. The Behavioral Economics of Effort

    … considered a dimension of the cost to obtain reinforcement, little research has examined the economic impact of effort on demand for food. The goal of the present study was to explore the relationship between effort and demand. Three Sprague Dawley rats were trained to press a force transducer …

    unt Repository record for The Behavioral Economics of Effort (opens in a new tab)

  11. Design, Implementation, and Test of a Micro Force Displacement System

    The design and implementation of a micro-force displacement system was completed to test the force-displacement characteristics of square silicon diaphragms with side lengths of 4mm, 5mm, and 7mm with a thickness of 10um. The system utilizes a World Precision Instruments Fort 10g force transducer …

    calpoly Repository record for Design, Implementation, and Test of a Micro Force Displacement System (opens in a new tab)

  12. Friction Properties of Polymer Systems as Measured Using Micropipettes

    … system, involving the use of micropipettes as force transducers, to measure the coefficients of friction of several systems. Using a magnetic pipette puller, the micropipettes were produced by first heating and stretching the glass. The pipettes are then manipulated into an L-shape. This …

    mcmaster Repository record for Friction Properties of Polymer Systems as Measured Using Micropipettes (opens in a new tab)

  13. Effects of stinger axial dynamics and mass compensation methods on experimental modal analysis

    … that is required to obtain accurate input forces when a stinger is installed between the excitation source, force transducer, and the structure under test. Stinger motion transmissibility and force transmissibility, axial resonance and excitation energy transfer problems are discussed in …

    iastate Repository record for Effects of stinger axial dynamics and mass compensation methods on experimental modal analysis (opens in a new tab)

  14. The Design and Characterization of an Experimental Helicopter Rotor Apparatus using a 7-Hole Probe

    … probe was used alongside a 6-degree-of-freedom force transducer to measure the 3D flow field and performance of the rotor. The original apparatus was provided by the industry research partner for this work, Davis Engineering. This rotor apparatus required several changes to produce a measurable, …

    queens Repository record for The Design and Characterization of an Experimental Helicopter Rotor Apparatus using a 7-Hole Probe (opens in a new tab)

  15. Computer Adaptive Control in Milling

    … Adaptive Control system consists of a cutting force transducer, and an Analog to Digital Processor which supply input to an A/C routine resident in the HP-2100 minicomputer. The Adaptive Control system and the cutting forces encountered in milling were simulated in computer programs. The system …

    mcmaster Repository record for Computer Adaptive Control in Milling (opens in a new tab)

  16. Concept and Operation of Robotic Nondestructive Testing Systems for Space Exploration Objectives

    … analysis was conducted to determine if impact force-time histories could provide similar information. The IS prototypes consisted of impact mechanisms, as well as; a force torque sensor (FTS) and 7 degree of freedom (7-DOF) robotic manipulator---two components slated for robotic exploration …

    wvu Repository record for Concept and Operation of Robotic Nondestructive Testing Systems for Space Exploration Objectives (opens in a new tab)

  17. EMG Changes of the Forearm Extensor Muscles at Different Forearm Postures

    Lateral epicondylitis is caused by repetitive and forceful movements of the forearm over long durations without sufficient rest in between. This study aimed to compare muscle length change in directions at different forearm postures. Fifteen healthy participants performed wrist extension against a …

    york Repository record for EMG Changes of the Forearm Extensor Muscles at Different Forearm Postures (opens in a new tab)

  18. A Study of the Correlation of Incisive Force with Hand Grip Strength, Height, and Weight in Adult Males

    Incisive force in a sample of 76 adult white males was tested for correlation with grip strength, height, and weight. A cantilever beam intraoral force transducer connected to a Techni-Rite Recorder with an SST Conditioner recorded the incisive forces. Grip strength was measured by the Collins Grip …

    iupui Repository record for A Study of the Correlation of Incisive Force with Hand Grip Strength, Height, and Weight in Adult Males (opens in a new tab)

  19. Analysis of a Numerical and Adaptive Control Servomechanism

    … Adaptive Control system consists of a cutting force transducer, and an Analog to Digital Processor which supply input to an A/C routine resident in the HP-2100A minicomputer. Both classical control theory and the state space technique were also used to investigate the operation of the A/C loop …

    mcmaster Repository record for Analysis of a Numerical and Adaptive Control Servomechanism (opens in a new tab)

  20. Aerodynamic Force Characteristics of 3D Flapping Wings

    … flapping wings are assessed by measuring the forces acting on them. A 3D flapping wing mechanism capable of mimicking the motion of insect flight is developed to measure forces acting on model wings flapping according to various motions. It consists of a pair of wings connected to gear boxes …

    nus Repository record for Aerodynamic Force Characteristics of 3D Flapping Wings (opens in a new tab) Download file for Aerodynamic Force Characteristics of 3D Flapping Wings (opens in a new tab)

Page 1 of 6