Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 15 of 15 for “"Forced Vibration Testing"”.
-
The Technique Of Determination Of Structural Parameters From Forced Vibration Testing
… of "useful" structural parameters from forced vibration testing. The implementation of this technique to full scale civil engineering structures was achieved by several developments in the experimental and computational fronts: a vibration generator and a computer-aided-testing system …
-
Forced Vibration Testing and Analysis of Pre- and Post- Retrofit Buildings
ABSTRACT Forced Vibration Testing and Analysis of Pre- and Post- Retrofit Buildings Erica Dawn Jacobsen The primary goal of the thesis was to detect the retrofit through vibration testing of both buildings. The secondary goal focused on correctly identifying the behavior of the building through …
-
An Investigation of the Influence of Diaphragm Flexibility on Building Design Through a Comparison of Forced Vibration Testing and Computational Analysis
An assessment of the validity of idealizing a concrete diaphragm as rigid was performed through the modal analysis of three existing buildings. Modal analysis was performed both by physical experimentation and computational analysis. Experimental determination of the mode shapes shows that two of …
-
Dynamic Analysis and Seismic Retrofit of the Point Sur Lighthouse
The Point Sur Lighthouse is an unreinforced stone masonry building completed in 1889 on the central coast of California. The lighthouse is listed on the National Register of Historic Places and is still an active aid to navigation. The original first-order Fresnel lens was removed from the lantern …
-
Dynamic Testing and Modeling of a Superelevated Skewed Highway Bridge
… is needed to define the procedures for testing each bridge. The NDE techniques involve dynamic testing, and the protocol for this testing has yet to be finalized. To evaluate the dynamic testing guidelines, a 103 ft single-span, simply supported highway bridge was dynamically tested. The …
-
Determination of the Modal Parameters of a Five Story Reinforced Concrete Structure Using Ultra-Low Level Excitation and Computational Analysis
… periods and mode shapes) using ultra-low level forced vibration testing and analytical modeling were critically compared. The structure utilized for this experiment is the Robert E. Kennedy Library on the campus of California Polytechnic State University San Luis Obispo, a five-story reinforced …
-
System Identification of a Bridge-Type Building Structure
… of system identification through ambient and forced vibration testing. Interesting findings such as diaphragm flexibility, foundation flexibility and frequency shifts due to thermal effects were all found throughout the mode shape mapping process. Nine apparent mode shapes were experimentally …
-
Modeling of soil-pile interaction for bridge foundations under seismic loading
… the current "state-of-practice" in the areas of testing and development of methods to model bridge foundations is presented.Two analytical techniques are presented to model a pile supported bridge foundation system. A model of a two-span continuous structure is analyzed with the foundation system …
-
Structural Damage Detection by Comparison of Experimental and Theoretical Mode Shapes
… focuses on removing the guesswork by using forced vibration testing (FVT) to experimentally determine the health of a building. The experimental structure is a one-story, steel, bridge-like structure with removable braces. An engaged brace represents a nominal and undamaged condition; a …
-
Identification of Physical Changes to a Steel Frame
The thesis utilized physical testing and computer modeling to determine the feasibility of identifying a change to the mass or stiffness of a steel frame. Physical testing was performed using an accelerometer, linear shaker, and arbitrary function generator. Two methods of laboratory testing were …
-
Dynamic analysis of bridges with laminated wood girders
… model was calibrated with results of ambient and forced vibration testing of an existing bridge. Finally, dynamic amplification factors were obtained from numerical simulations and compared with CHBDC provisions. The results of this study showed that these provisions are generally adequate for …
-
Vibration-based finite element model updating and structural damage identification
… Structural health monitoring strategy based on vibration measurements for existing aging structures offers a promising technique for effectively managing the deteriorating structures. The main objectives of this research are to develop a procedure for finite element model updating by using …
-
Seismic Response Categorisation of New Zealand Bridges
… bridge stock consisted of short cast in situ reinforced concrete or precast concrete bridges built prior to the mid-1970’s. From the typologies developed during categorisation test bridges were selected for field testing. Forced vibration testing and system identification were used to investigate …
-
Vibration characteristics of single-family woodframe buildings
… of Canada and insufficient information on the vibration behaviour of Canadian woodframe buildings prompted this investigation of the dynamic behaviour of woodframe houses in Canada. The objectives of this thesis are to gain a better understanding of the dynamic characteristics of single-family …
-
Structural Integrity Assessment Using Vibration Data
… A suitable method with these attributes is vibration monitoring which involves relating dynamic properties, or changes in them, to the integrity of the assessed structure. The present study investigates the application of vibration testing to structural integrity assessment of civil …