Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 25 for “"Formlabs"”.
-
Evaluation of the bond strength of various denture teeth materials to conventional, CAD/CAM, and 3D printed denture bases
… Lucitone Digital Print (Dentsply Sirona), and Formlabs Denture Base (Formlabs) denture base materials, plate specimens were fabricated (15 mm × 15 mm × 2 mm). These base materials were bonded to Portrait IPN (Dentsply Sirona), Ivotion Dent (Ivoclar Vivadent), Lucitone Digital Value (Dentsply …
-
Flexural Strength of SLA 3D-Printed and Conventional Interim Materials
… fabricated with a 3D printable resin (C&B resin, Formlabs), a CAD PMMA disk (Telio CAD, Ivoclar Vivadent), a conventional PMMA resin (Telio Lab, Ivoclar Vivadent), and a Bis-acryl resin (TempSmart, GC America).Null Hypothesis: 1. There is no difference in mean Flexural strength between the printed …
-
Optinis 3d mikroporėtų karkasų spausdinimas, biosutaikomumo vertinimas ir gerinimas in vitro /
… is harder to print rare geometry materials with Formlabs Clear resin than with Formlabs Flexible. Also, the studied repeatability parameter shows that by changing the pore geometry of the structure (in order: rectangle, square, triangle), the printed objects had smaller repeatability. Assessed …
-
Dimensional changes in 3D printed models from two different technologies under different storage conditions
… from two different technologies, Carbon 3D and Formlabs 3 printers. The models were printed at 50 micrometers layer thickness. These printed models were randomized into 3 groups per printer (n=5) for storage: Room-temperature (22 ± 2 °C), low-temperature (~4 ± 1 °C), and High-temperature (50 ± 2 …
-
Shear Strength and Color Stability of Temporary Crown and Bridge Materials Fabricated from Subtractive and Additive CAD/CAM Techniques
… Graphy) to the printed resin (C&B resin, Formlabs), and the milled PMMA discs (Telio Cad, Ivoclar Vivadent). Methods: Three groups of disc specimens (Ø4x14 mm) were designed using CAD software (AutoCAD Inventor). For shear, 13 samples each were manufactured from 3D printed resins by …
-
Wettability of saliva substitutes on CAD/CAM denture base materials
… disc milled in Dentsply MCX5) and Pnp (printed; Formlabs denture base resin printed in Formlabs 3B). Phase 2 measured CA of deionized water on 5 polished denture bases: C (conventional; Lucitone 199 heat cured), M (milled), P (printed), I (injection molded; Ivocap), and F (flexible; Ultraflex). …
-
Einfluss der Druckorientierungen bei Langzeit-Brückenprovisorien auf die Langzeitbelastbarkeit
… additiv gefertigten LZP (SLA-Verfahren, Form2, Formlabs) auf deren Langzeitbelastbarkeit und mechanisches Bruchverhalten untersucht. Es wurden 64 standardisierte dreigliedrige Brückenprovisorien aus Acrylharz (Denture Teeth, Formlabs) hergestellt und in vier Untergruppen, abhängig von der …
-
Measurement of Surface Heat Flux Due to Fin-Induced Shock-Boundary Layer Interactions
… Wind tunnel models were 3D printed from Formlabs Rigid 10K resin using a Formlabs 3L printer. To accurately quantify heating caused by fins, a new method was developed to convert infrared temperature measurements into heat flux using the full, 3D heat equation. The fin-cone model with a …
-
Analysis of the mechanical and physical properties of printed and milled denture base materials
… print denture base resin (Dentsply Sirona), Formlabs denture base resin (Formlabs), and Dentca denture base resin II (Dentca). METHODS: For each material, 60 bar-shaped specimens were prepared for flexural testing, which were divided into 5 groups including control, fatigue, thermocycling, …
-
Friktionsverhalten von neuentwickelten Kunststoffkappenvarianten für das RED-Bracket
… stereolithographischen 3D Drucker Form2 (Firma Formlabs, Somerville, USA) hergestellt.
-
Synthesis and Behavior Characterization of Multi-Scale Hierarchical Structured Composites
… achieve this the material categorization of the Formlabs Tough V2 resin was conducted. The resin was used in the construction of a bio-mimicry diamond lattice structure. The structure was subjected to compression testing to characterize the material properties. The Tough V2 resin structure …
-
The effect of denture cleansers on the mechanical and optical properties of 3D printed and heat-polymerized dentures
… Lucitone Digital Print, DENTCA Denture Base II, Formlabs denture resin, and Lucitone 199. Each type of acrylic was divided into four sub-groups, Efferdent, Polident, dish soap and control group in water. Specimens of each material were exposed to a total of 28 cycles of immersion in denture …
-
Einführung eines neuen Lehrkonzeptes für Wurzelstiftpräparationen mittels 3D-gedruckten Zähnen
… konstruiert und im SLA-Verfahren (Form 2, Formlabs) gedruckt. In einer Interventionsstudie mit zwei Gruppen präparierten 48 Studierende des vierten Studienjahres je vier Zähne: Gruppe 1 vier weiße, Gruppe 2 zunächst zwei transparente und anschließend zwei weiße Zähne (n = 192). Die …
-
Characterization and application of an additively manufactured photopolymer: From nanoindentation to a novel mechanical attachment for scalable structures
… viscoelastic photopolymer resin (Formlabs Tough 1500 V1) and applies the resulting material understanding to the design of a novel mechanically interlocking structural connector. A finite element simulation validated the flat-punch (FP) analytical solution against the flat-end …
-
3D Printing of Specialty Devices for Geochemical Investigations: Real-Time Studies of Goethite and Schwertmannite Formation
… properties of a commercial 3D printing material (Formlabs Clear) by UV post-curing procedures and also provide data showing its stability in aqueous solutions at pH 0, 5.7, and 12 for periods of up to 18 days. Thermal degradation patterns, mechanical analysis, and leachable fraction data are …
-
Development of a Computational and Experimental Framework for Characterizing Defects in Additively Manufactured Lattices
… physical samples across three polymer resins (Formlabs Rigid10k, Tough 1500, and BlackV4). Custom automated metrology software rigorously analyzes the as-manufactured lattice quality by extracting precise thickness, length, orientation, and straightness data for every element of each lattice …
-
Fabrication of microfluidic chip using 3D printing for ocular cell studies
… of two commercially available 3D printers: the Formlabs Form 3B+, which employs Stereolithography (SLA) technology, and the AnyCubic D2 DLP, which utilizes Digital Light Processing (DLP) technology. The fabrication of PDMS from 3D printed moulds can be achieved by introducing three simple …
-
Comparing Friction and Slot Dimensional Integrity of In-House 3D-Printed Orthodontic Brackets to Injection-Molded Alternatives
… hooks were 3D-printed with Form 3B+ 3D-printer (Formlabs, Springville, MA) with the slot perpendicular to the build platform and direction of layer deposition. Each bracket model was scaled up in size by a multiplier of 1.177 to account for material shrinkage. AI-generated support struts were …
-
Effects of Conformal Cooling Channels on Additively Manufactured Injection Molding Tooling
… material, High Temp Resin produced by Formlabs, another acrylic based photopolymer, was also tested but yielded very little success. Then the mold design was altered by adding conformal cooling channels and again tested by producing injection molded parts while tracking the mold …
-
Evaluation of Flexural Strength and Microhardness in Interim Restoration Materials: Comparing Subtractive and Additive Manufacturing Methods
… (TC-80DP, Graphy), printed resin (C&B resin, Formlabs), and milled PMMA discs (Telio CAD, Ivoclar Vivadent), both with and without thermocycling.Materials and MethodsFlexural strengthA total number of six groups each one is made up from (n=10) specimens that either went Thermocycling or not …
Page 1 of 2