Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 17 of 17 for “"Four point bend test"”.
-
Interfacial fracture energy (bonding strength) of laser deposited H13 tool steel on H13 tool steel substrate using four point bend test
… tool steel cladding/substrate system. For this four point bend test based on linear elastic fracture mechanics (LFEM) was carried out. Strain energy release rate, Gss which is closely related to bond strength of the interfacial region and the stress intensity factor, Kc were computed for this …
-
Adhesion Comparison of Low Dielectric Constant Thin Films Using Four Point Bend and Nanoscratch Testing
… constant (low-k) thin films. In this thesis the four point bend test and nanoscratch test method was used for evaluating adhesion of boro-phosphate-silicate glass (BPSG) and tetraethylorthosilicate (TEOS) low-k thin films to silicon subtrates. Nanoindation tests were also performed on the low-k …
-
Hydrogen Embrittlement of A High Strength Low Alloy Pipeline Steel
… strength low alloy (HSLA) pipeline steel using a four point bend test. Hydrogen was introduced into single V-notched test samples by a standard BP method. Slow bend tests were conducted on both the base metal and on the heat affected zone (HAZ) of a commercially welded plate. It was found that …
-
Damage accumulation of bovine bone under chaotic and variable amplitude loading.
… The Moon's Beam experimental set-up was used to test chaotic loading conditions. The variable amplitude set-up was utilized to test variable amplitude loading conditions. Lastly, a four-point bend test was used to determine the baseline properties of the bone tissue. Scanning electron microscopy …
-
Residual stress and cohesive strength of TiC composite coating on aluminum alloys during laser surface engineering
… strengths and residual stresses are measured by four-point bend test and the XRD "sin2w " technique, respectively. The results showed that the residual stresses have a significant effect on the cohesive strength and microstructure of the coatings. The magnitude of residual stresses changed from …
-
Fracture Toughness Testing of Plastics under Various Environmental Conditions
The primary objective of this study is to test the applicability to plastics of a fracture toughness testing tool developed for metals. The intent is to study pre-test conditioning of several plastic materials and the effect of the depth of the razor notch cut in the chevron notched fracture …
-
Improving and predicting the strengths of fiber-reinforced composites using a graphene-based self-healing system and finite element analysis
… energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA) to confirm the encapsulation of nanoparticles along with the healing agent. Finite element analysis …
-
Stress Corrosion Cracking and Hydrogen Embrittlement Atmospheric Corrosion Testing of Control and Prototype Steels
… research involved the design of an experiment to test the stress corrosion cracking and hydrogen embrittlement susceptibility of HY-100, HSLA-150, 10Ni QQT, and 10 Ni QQLT steels. A modified version of the standardized four-point bend test in which samples are stressed to 90% of their yield …
-
AN ANALYTICAL APPROACH FOR FATIGUE LIFE ESTIMATION OF COPPER TRACES FOR DESIGN OPTIMIZATION IN ELECTRONIC ASSEMBLIES
… using experimental results from a fully reversed four point bend test and finite element analysis. The durability data collected from the experiment was used in conjunction with the finite element based critical trace strain, to develop a set of compatible fatigue model constants that best fit the …
-
Cohesive zone modeling for predicting interfacial delamination in microelectronic packaging
… and such samples are used in experiments such as four-point bend test and double cantilever beam test to obtain the cohesive zone model parameters for a range of mode mixity. The developed cohesive zone elements are then placed in a small-outline integrated circuit package model at the interface …
-
Understanding the effect of surface generation rates for finish milling of Ti-5Al-5Mo-5V-3Cr aero-structural components
… landing gear components. Low cost, small scale testing methodologies have been developed to replicate complex machining strategies employed in aerospace manufacturing, to understand and develop an improved processing window. Machinability trials identifieded the influence of cutting speed (Vc), …
-
Fatigue damage accumulation in titanium alloy IMI 834.
… occur at the dislocation level. Load controlled four point bend test specimens of IMI 834 were cyclically fatigued to failure with an R ratio of 0.1 over a range of maximum stress levels and the fatigue and fracture surfaces were examined by optical and scanning electron microscopy. The …
-
Modeling of delamination in carbon/epoxy composite laminates under four point bending for damage detection and sensor placement optimization
… containing embedded delamination using the Four-Point Bend Test. The Lamb wave-based approach as a structural health monitoring (SHM) technique is used for damage detection in the composite coupons. Tests were carried-out on unidirectional composite coupons, obtained from panels manufactured …
-
Dynamic delamination of patterned thin films
… of the thin film/substrate interface. The testing method involves using a laser-induced acoustic stress wave to load the film/substrate fracture plane in tension at very high strain rate (~10^7/s) leading to the inertia-driven interface delamination. A weak adhesive layer is selectively …
-
Short-Term Failure Analysis of Aluminum Conducting Composite Core Transmission Lines
… element models. It was found that excessive bending was the most likely cause of short-term damage to the core. During bending of the ACCC core, stresses are concentrated at the interface in the carbon fiber composite region. The composite materials' compressive strength was measured, and …
-
Processing and mechanical properties of NiAl-based in-situ composites
… advantageous properties include: high melting point, high thermal conductivity, low density, excellent oxidation resistance, and low material costs. However, the use of ordered intermetallic alloys for structural applications have been limited due to their brittleness at room temperature. Also, …
-
Effects of Low Velocity Impact on the Flexural Strength of Composite Sandwich Structures
… sandwiches under impact loads. Experimental testing can still be unpredictable, however, because low velocity impacts can cause undetectable damage within the composites that weaken their structural integrity. This is an important issue with composite sandwich structures because interlaminar …