Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 81 for “"Four-probe"”.
-
Four-probe thermal transport measurements of mesoscale structures
… between 1 [mu]m and 1 mm. A recent reported four-probe thermal transport measurement method for nanostructures can separately obtain the intrinsic thermal resistance and the contact thermal resistance. This thesis reports an investigation of the applicability of this method for mesoscale …
-
Four-probe thermal measurement of a carbon nanotube sheet
… from the measurement results. Recently, a four-probe thermal measurement technique has been developed to measure the intrinsic thermal conductance of a suspended sample as well as isolate the values of contact resistance between the sample and measurement device. Here, the fabrication …
-
Four probe, In Situ electrical characterization of dopant structures in silicon
… achieve this we have used an ultra-high vacuum four-probe scanning tunneling microscope(STM) in combination with a gaseous molecular dopant precursor (PH3) and a silicon sublimation source for epitaxial encapsulation. Initially we investigate and improve ex situ Ohmic contact formation to highly …
-
Four-probe thermal transport measurements of few-layer graphene and ultrathin graphite
… contact thermal resistance has limited prior two-probe thermal transport measurements of suspended graphene samples. This work utilizes a four-probe thermal measurement technique to measure few-layer graphene and ultrathin graphite samples. This technique has the ability to measure the intrinsic …
-
Four-probe measurements of anisotropic in-plane thermal conductivities of thin black phosphorus
… multi-layer BP samples, which are measured by a four-probe thermal transport measurement method. The measurement device consists of four microfabricated, suspended Pd/SiNx lines that act as resistive heaters and thermometers. The BP flake is suspended across the microstructure in contact with all …
-
Four-probe thermal and thermoelectric transport measurements of bismuth antimony telluride, silicon, and boron arsenide nanostructures
… two different methods, are characterized with a four-probe thermoelectric measurement method based on a suspended device. The obtained thermoelectric property reveals a transition from n-type to p-type electronic transport as the antimony to bismuth ratio is increased to about 0.25. The peak zT …
-
Study of Carbon Nano-Fiber Aggregates with AC Measurements
… (CNFAs). Many researchers have adopted the four probe technique to measure DC electrical resistance variation of concrete composites like CNFAs to study the effect of stimuli on structures. In this research, four probe CNFAs were modified into two-probe, and its response in circuits with DC …
-
Sub-micron scale conduction processes on clean surfaces
… function of the incident adatom flux rate with a four probe technique. A conductance study in a three dimensional conical structure was also carried out with field emission techniques. Field emission is now well established and has been used in this case to characterize a novel geometry for use in …
-
Pulsed laser deposition of YBa2Cu3O7-[delta]/PrBa2Cu3O7-[delta] /
… Results of resistivity measurements using the four probe technique will be shown.
-
Amelioration Effects of Calcium Amendments on the Growth of <em>Phaseolus vulgaris</em> L. Under Sodium Stress
… electrical conductivity of the media using the four probe. The results showed that addition of CaS04 to NaCl or Na2S04 was associated with a better amelioration of Na stress than CaCl2 • Also the presence of CaS04, with NaCl or Na2S04, decreased the uptake of Ca and Na ions relative to CaCl2 …
-
Microwave dielectric measurements on MEM(TCNQ)₂ and TTF-TCNQ
… was found to be in general agreement with four-probe d.c. results. Thus, doubts about the reliability of the d.c. measurements above the destructive transition have been removed. The complex dielectric constant of TTF-TCNQ at liquid helium temperatures was studied using dielectric resonance …
-
Determining a Crop Production Function for Corn as Influenced by Irrigation and Salinity Levels
… A continuous variable plot design replicated four times was established in the spring of 1974 in Vernal, Utah. Each replication included ten salt treatments and twenty irrigation levels. The salt treatments resulted in an average root zone salinity ranging from 2 . 7 to 14.9 mmhos/cm. …
-
AI-Based Digital Twin for Flexible Hybrid Electronics Fabrication
… Electrical resistance was measured via four-probe testing and served as ground truth. Two modeling approaches were implemented: a feature-based pipeline for predicting resistance and dimensions, and an image-to-image translation model using HyperPix2Pix to reconstruct printed structures …
-
Mobility and Saturation Velocity in Graphene on Silicon Dioxide
… graphene samples on SiO2 are examined from four-probe electrical measurements combined with electrical and thermal modeling. Data are analyzed with practical models including gated carriers, thermal generation, “puddle” charge, and Joule heating. Graphene mobility is characterized as a …
-
Anglies nanostruktūrų savybės terahercų dažnio elektromagnetiniuose laukuose /
… substrate and producing these optical elements. Four – probe sensing, dielectrical spectroscopy, THz Continuous – Wave and THz Time – Domain spectroscopy experimental techniques as well as Maxwell – Garnett approximation as a theoretical tool were employed to design and investigate the composites …
-
The Vertical Distribution of Salts in a Soil Profile During the Drainage Process
… two lysimeters and wheat as a crop. A neutron probe and the four-probe electrode method were used to follow the change in the soil moisture and the salinity in the profile during the growing season. Comparisons were made between the measured and simulated values of water content and salinity. …
-
Characterization of Interconnects for Perovskite Solar Modules
… and characterization procedures. Using a four-point probe system, multiple aspects of electrical characterization can be carried out with simple test structures resembling solar modules. Previously, this probe system has been used to characterize sheet resistance of semiconductors and …
-
STM investigation of model systems for atomic and molecular scale electronics
… of this work, I test the new low-temperature four-probe STM located at CEMES-CNRS in Toulouse. This machine is constructed for the development of molecular scale devices. For this purposes an atomic precision is needed for all the different tips at the same time and a high stability of this …
-
Growth and Characterization of Inorganic/Organic Spintronic Devices
… the magneto-transport characterization using a four-probe technique in the presence of magnetic field at room temperature. The results indicate that Co/PHP/Ni-Fe alloy heterostructure is promising and valuable for applications in spintronic devices and sets foundation for further research work.
-
Processing and Fabrication of Polyaniline Micro-Devices Using Photolithography
… carried out on these devices using a standard four-probe method. From the current-voltage curves the resistivity of the devices has been calculated. The final results show that polyaniline can be successfully patterned onto silicon substrate by photolithography process and the patterned units …
Page 1 of 5