Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 15 of 15 for “"Four-quadrant operation"”.

  1. Design and Implementation of Four-quadrant Operation in Single-Switch Based Switched Reluctance Motor Drive System

    … lack of self-starting capability and restricted operation conditions. This thesis presents a four-quadrant operation SRM drive system with a single controllable switch for two phase configuration. The SRM's configuration has four main stator poles, four rotor poles, and four auxiliary stator …

    vt Repository record for Design and Implementation of Four-quadrant Operation in Single-Switch Based Switched Reluctance Motor Drive System (opens in a new tab)

  2. Design and Implementation of a Novel Control System for Four Quadrant Operation of a Two-Phase Switched Reluctance Motor

    … focused on the use of three and occasionally four phase machines, while low cost applications demanding only modest performance have largely been the domain of single phase machines. By contrast, while two phase systems have been the subject of occasional studies, they have not been widely …

    vt Repository record for Design and Implementation of a Novel Control System for Four Quadrant Operation of a Two-Phase Switched Reluctance Motor (opens in a new tab)

  3. PULSE-WIDTH-MODULATION CURRENT CONTROL OF A SWITCHED RELUCTANCE MOTOR DRIVE: CONTROLLER DEVELOPMENT AND SUPPLY CURRENT RIPPLE REDUCTION

    This thesis details the development of a four-quadrant proportional-integral (PI) pulse width modulation (PWM) current controller for a switched reluctance motor (SRM) drive, with distinct control strategies for both motoring and generating modes. In the motoring mode, the controller was designed …

    mcmaster Repository record for PULSE-WIDTH-MODULATION CURRENT CONTROL OF A SWITCHED RELUCTANCE MOTOR DRIVE: CONTROLLER DEVELOPMENT AND SUPPLY CURRENT RIPPLE REDUCTION (opens in a new tab)

  4. A Study and Optimization of a Radial Ball Piston Pump for High-Speed Applications

    … maintaining 80 – 90 percent efficiency across four quadrants of operation and packaged a 20kW machine within approximately 100mm outside diameter. The work within this thesis represents the first computationally fast and accurate model of a radial ball piston unit that was utilized within an …

    umn Repository record for A Study and Optimization of a Radial Ball Piston Pump for High-Speed Applications (opens in a new tab)

  5. Resonant DC link converters and their use in rail traction applications

    … also benefits from soft-sVVItching andallows four-quadrant operation at any desired power factor. A modulation scheme based onSiMulated Annealing is proposed for the pulse-converter, to achieve hannomc control whilst alsosynchronising with the supply wavefon-n. Practical results are presented …

    salford Download PDF for Resonant DC link converters and their use in rail traction applications (opens in a new tab)

  6. Variable-Speed Switched Reluctance Motor Drives for Low-Cost, High-Volume Applications

    … two-phase 8/4 SRM capable of self-starting and four-quadrant operation. The second drive system is realized using another novel converter requiring two controllable switches, that way to achieve better control and utilization of the asymmetric 8/4 motor. The target applications for both drive …

    vt Repository record for Variable-Speed Switched Reluctance Motor Drives for Low-Cost, High-Volume Applications (opens in a new tab)

  7. Control and Delay Compensation Techniques for High-Speed Operation In a Switched Reluctance Motor Drive

    … for electric vehicles. However, SRMs face operational challenges at high speeds, where controller and position feedback delays may hinder smooth operation and efficiency. These challenges might limit the adoption of SRM in high-performance applications. This thesis addresses high-speed SRM …

    mcmaster Repository record for Control and Delay Compensation Techniques for High-Speed Operation In a Switched Reluctance Motor Drive (opens in a new tab)

  8. Control Techniques for a Single-Phase Bi-Directional Full-Bridge Active Rectifier for Vehicle-to-Grid and Grid-to-Vehicle Applications

    … on the design of a controller which allows for four quadrant operation of the AC/DC converter by directly controlling the active and reactive power. This will allow EV owners to participate in ancillary services such as voltage control of the grid. This has potential to generate additional …

    queens Repository record for Control Techniques for a Single-Phase Bi-Directional Full-Bridge Active Rectifier for Vehicle-to-Grid and Grid-to-Vehicle Applications (opens in a new tab)

  9. Active and Reactive Power Control of Flexible Loads for Distribution-Level Grid Services

    … charging/discharging can take place in any P-Q quadrants, which means EVs could provide reactive power at any state-of-charge (SOC). This dissertation shows four-quadrant operation of EVs and aggregation of EVs for support of grid operations. First, this work develops hierarchical coordination …

    mtu Repository record for Active and Reactive Power Control of Flexible Loads for Distribution-Level Grid Services (opens in a new tab)

  10. Analysis and design of matrix converters for adjustable speed drives and distributed power sources

    … attractive characteristics such as: inherent four-quadrant operation; absence of bulky dc-link electrolytic capacitors; clean input power characteristics and increased power density. However, industrial application of the converter is still limited because of some practical issues such as …

    tamu Repository record for Analysis and design of matrix converters for adjustable speed drives and distributed power sources (opens in a new tab)

  11. Novel Multilevel Converter for Variable-Speed Medium Voltage Switched Reluctance Motor Drives

    … The drive is capable of variable speed, four-quadrant operation. Each phase leg of the converter contains an arbitrary number of cascaded cells connected in series with the phase winding. Each cell contains a half-bridge chopper connected to a capacitor. The converter is named the …

    vt Repository record for Novel Multilevel Converter for Variable-Speed Medium Voltage Switched Reluctance Motor Drives (opens in a new tab)

  12. Design and development of a traction motor emulator using a three-phase bidirectional buck-boost AC-DC converter

    … strategy are also presented. To validate the operation of the proposed converter as a common DC-bus-configured emulator, two permanent magnet synchronous motors (PMSM) of 7.5 kW and 2.0 kW are emulated and their simulation and experimental results are presented here. The proposed …

    uoit Repository record for Design and development of a traction motor emulator using a three-phase bidirectional buck-boost AC-DC converter (opens in a new tab)

  13. Development of an FPGA based Matrix Converter for More Electric Aircraft Applications

    … availability, efficiency, maintainability and operational costs for the next generation of aircrafts. The general requirements of these power circuits are: the system must be fault tolerant with ability to continue operating properly (possibly at a reduced level) in case of a failure, the …

    poli-torino Repository record for Development of an FPGA based Matrix Converter for More Electric Aircraft Applications (opens in a new tab)

  14. High-Frequency Quasi-Single-Stage (QSS) Isolated AC-DC and DC-AC Power Conversion

    … the switches in the output side bridge. Seamless four-quadrant operation in the inverter mode, and rectifier operation with unity power factor in the charger (rectifier) mode are realized with the proposed uni-polar center-aligned PWM scheme. Single-stage power conversion, standard half-bridge …

    vt Repository record for High-Frequency Quasi-Single-Stage (QSS) Isolated AC-DC and DC-AC Power Conversion (opens in a new tab)

  15. Universal Position-Sensorless Control for Switched Reluctance Motor Drives

    … costs, higher efficiency, and robustness operation in a harsh envi-ronment. For accurate control of the SRM, the real-time rotor position is needed for phase computation. To obtain position information, position-sensorless control techniques have been developed to take the role of position …

    mcmaster Repository record for Universal Position-Sensorless Control for Switched Reluctance Motor Drives (opens in a new tab)