Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 17 of 17 for “"Fracture Interference"”.
-
Application of Machine Learning on Fracture Interference
… locates and determines well-to-well hydraulic fracture interference (frac-hit) in shale plays using hard data. This method uses Artificial Neural Networks (ANN) with designated parameters and target outputs in conjunction with graphs of gas flowrate, tubing pressure, and cumulative gas …
-
Modeling interwell fracture interference and Huff-n-Puff pressure containment in Eagle Ford using EDFM
… in optimal spacing of infill wells and further fracture optimization, which ideally should have as little interference with the existing wells as possible. Although proper modeling has been employed to show the existence of well interference, few models have forecasted the impact of multiple …
-
Pressure Transient Analysis and Production Analysis for New Albany Shale Gas Wells
… of the horizontal well with multiple transverse fractures (MTFHW) was discovered and its significance to economic shale gas production was understood, rate decline and pressure transient analysis models for this type of well were developed to reveal the well behavior. In this thesis, we …
-
Analysis of Hydraulic Fracture Propagation and Well Performance using Geomechanical Models and Fast Marching Method
… resource plays relies on the massive hydraulic fractures which provide high conductive paths and large contact area between formation and wellbore. The pursuit of efficiency and cost savings drives the industry to implement the strategies that utilize more closely spaced hydraulic fractures, as …
-
Development of a Model for Transboundary Flow
… boundary dominated flow (usually from complete fracture interference or actual boundary) may not be observed. This prolonging of transient flow also prolongs the transition period between the end of linear flow (primary or compound linear flow) and the onset of complete boundary dominated flow, …
-
Effect of Reservoir and Completion Parameters on Production Performance in Gas Condensate Reservoirs
… MBO approach was used with Kappa Rubis software. Fracture half-length and porosity showed the most significant effect on production performance. Sensitivity studies also showed that there is significant increase in fracture interference when the fracture spacing is decreased below 253 ft. Increase …
-
Engineered mRNA therapeutic encoding beta-catenin increased bone formation in a murine tibial fracture model
Fractures continue to be a global economic burden and impaired fracture healing cases, like delayed and non-union, occurring in about 14% of all tibial shaft fractures. Current treatments to aid in fracture healing involve surgical interventions and osteoanabolic, bone-morphogenetic protein-2 …
-
Pattern Generation of Strain Rate Simulation for Cross-Well Hydraulic Fracture Monitoring in Unconventional Reservoirs
… large contact area) normally results in complex fracture growth that cannot be simply modeled with conventional fracture models. Lack of understanding of the fracturing mechanism makes it difficult to design and optimize hydraulic fracturing treatments. Many monitoring, testing and diagnosis …
-
SPADES Application Development and Production Forecast Based on Drainage Volume Formulation
… of a well. To understand the complex fracture geometry, we develop the asymptotic solution of the diffusivity equation. This work builds on the research by Zhenzhen Wang (Wang, 2018) and Andrew Malone (Malone, King, & Wang, 2019), and implements the time evolution of the w(τ) function, …
-
A comprehensive numerical model for simulating two-phase flow in shale gas reservoirs with complex hydraulic and natural fractures
… and complex natural and induced (hydraulic) fracture geometries. Production from shale gas reservoirs is predominantly composed of two-phase flow of gas and water. However, proper modeling of the two-phase behavior as well as incorporating the complex fracture geometries have been a challenge …
-
Improved Modeling of Pseudo Pseudo-Steady State Flow Regime in Unconventional Reservoir
… horizontal wells with tight spacing hydraulic fractures. Such strategy leads to a significant loss of flowing area during fracture interference, thus resulting in a transition flow regime with unit slope identified as pseudo pseudo-steady state flow. Capturing such flow regime is critical in …
-
Analytical Modeling of Multi-Fractured Horizontal Wells in Heterogeneous Unconventional Reservoirs
Current analytical models for multi-fractured horizontal wells (MFHW) generally neglect reservoir heterogeneity, typical seepage characters of unconventional reservoir, partially penetrating fracture and various fracture damage mechanisms. In this thesis, three linear flow models have been …
-
Coupled Fluid Flow and Geomechanical Modeling for Evaluating Unconventional Well Performance and Seismicity Risks
… to understand the characteristics of hydraulic fractures under different completion designs. First, we perform a site-specific study of the mechanics of induced seismicity in the Azle area, North Texas, using a coupled 3-D fluid flow and poroelastic simulation model. The results show no fluid …
-
Study of Multi-scale Transport Phenomena in Tight Gas and Shale Gas Reservoir Systems
… The model captures the various configurations of fractures induced by shale gas fracture stimulation. Through modeling of the physics at the macro-scale (e.g. reservoir-scale hydraulic fractures) and micro-scale (e.g. Knudsen diffusion in kerogen nanopores), we illustrate how and why gas …
-
NUMERICAL MODELING AND DIAGNOSTICS OF INTER- AND INTRA-WELL INTERFERENCE IN TIGHT OIL RESERVOIRS: TOWARDS OPTIMAL WELL SPACING DECISIONS
… solutions to the perplexing problem of well interference and its implications on completions design, well-spacing decisions, and ultimately the economics of unconventional reservoirs. Optimal fracture spacing has eluded reservoir and completions engineers since the inception of multi-stage …
-
Temperature Prediction Model for Horizontal Well with Multiple Fractures in Shale Reservoir
Fracture diagnostics is a key technology for well performance prediction of a horizontal well in a shale reservoir. The combination of multiple fracture diagnostic techniques gives reliable results, and temperature data has potential to provide more reliability on the results. In this work, we show …
-
DEVELOPMENT OF EFFICIENTLY COUPLED FLUID FLOW AND GEOMECHANICS MODEL FOR HIGHLY FRACTURED RESERVOIRS
… increases the number of infill wells. Hydraulic fractures created from infill wells tend to propagate towards the parent well as a result of reservoir depletion. The interference between parent and infill well fractures due to a tight spacing is the main cause of poor production performance in …