Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 75 for “"Fracture Process Zone"”.
-
Experimental and numerical modeling-based characterization of fracture process zone in quasi-brittle materials
… of a significant size of the inelastic zone around the pre-crack tip, also known as the fracture process zone (FPZ). A comprehensive characterization of the FPZ is crucial for predicting the associated macroscopic cracking process, as it plays a vital role in the estimation of various …
-
Effect of specimen geometry and test configuration on the fracture process zone for asphalt materials
… the symmetric axis resulting in mode-I type of fracture similar to, the typical three-point bending beam tests. The I-FIT global response refers to the load-versus-displacement curve that is characterized using the fracture energy (FE), strength, and post-peak slope. The microstructural response …
-
Novel techniques for fracture monitoring in crystalline rock
The study of fracture is necessary in geotechnical engineering for the safe design of structures and application of engineering principles. Fracture plays a significant role in the behavior of rock and structures during failure. Often times, fracture processes observed in the laboratory do not …
-
Micromechanical Simulation of Fatigue in Nodular Cast Iron
… as voids, and they are resolved discretely in fracture process zone. The region outside of the fracture process zone is considered as a homogenized medium. When positive alternating loads are applied, ligaments in the fracture process zone show ratchetting behavior, which is responsible for an …
-
Composite beam analogy fracture model (CBAFM) : a non-linear fracture mechanics model for concrete
… dissertation is to develop a simple non-linear fracture mechanics model for the determination of fracture mechanics parameters for concrete, such as fracture process zone length (rp), critical fracture energy release rate (Gic), critical stress intensity factor (KO and fracture energy (GF). The …
-
Behaviour of fracture process zones in concrete influenced by simultaneously applied normal and shear displacements
… stresses remains consiant during the entire fracture process. However, since the mid-eighties the applicability of the model has been further extended to cases where the direction of the principal stresses is changed during the fracture process. The applications of the model in these cases …
-
Tensile strength and fracture mechanics of cohesive dry snow related to slab avalanches
Fracture mechanics has been applied for over 30 years to explain the release of slab avalanches, but most studies have focused on the initial shear fracture which governs the loss of slab stability rather than the ultimate tensile fracture which releases the avalanche. The application of continuum …
-
Prediction of service load of concrete structures after cracking using ultrasonic technique
… study is to investigate the cracking behavior of fractured concrete structures and to introduce a new approach to assess their remaining service lives. A novel ultrasonic technique is utilized to detect crack propagation in notched beams of mortar, plain concrete and reinforced concrete. The study …
-
Understanding Longitudinal Top-down Cracking to Enhance Asphalt Mix Design
… bilinear constitutive equation for cohesive zone modeling of asphalt concrete's fracture process zone to accurately predict the longitudinal top-down crack initiation and propagation. A mathematical model has been developed for the AC materials' deformation rate-dependent cohesive zone …
-
POROELASTIC AND POROPLASTIC MODELING OF HYDRAULIC FRACTURING
… essential to predict the behavior of hydraulic fractures accurately based on the understanding of fundamental mechanisms, governing process. The prevailing approach for hydraulic fracture modeling relies on Linear Elastic Fracture Mechanics (LEFM) that gives reasonable predictions for hard rock …
-
Mechanisms of Ductile Fracture: Void Growth by Dislocation -Loop Emission and Hydrogen-Assisted Crack Propagation
… propagation in materials which fail by ductile processes in the presence of hydrogen. First the hydrogen effect on dislocation mobility and lattice dilatation was considered to establish the material constitutive law. Simulations in a unit cell containing a void were carried out to devise …
-
Fracture Behavior of Masonry Bond
The applied fracture mechanics model, when both elastic and inelastic deformations were considered, always over-estimated the post-peak behavior. However, the post-peak behavior was successfully predicted when the model was modified to consider only elastic deformation. The analysis indicated that …
-
Evaluation of viscous effects in crack tip fields in recycled asphalt pavement materials using digital image correlation
In this work, we investigated the fracture behavior of asphalt, a heterogeneous mixture of hard aggregates (usually rock) with a polymeric binder (also called asphalt), used in paving applications. Specifically we studied the dependence of asphalt fracture response on loading rate, temperature, and …
-
Size effect on fatigue crack growth of a quasibrittle material
… crack growth has the same form as that of fracture energy for monotonic loading; (2) the difference in transitional sizes between the fatigue and monotonic loading is purely due to the difference in the fracture process zone (FPZ) size. The size-dependent fatigue crack growth law is …
-
Perpendicular to grain fracture analysis of wooden structural elements - Models and applications
… work regarding perpendicular to grain fracture in wooden structural elements. The experimental part concerns strength tests of glulam beams with a hole. The theoretical parts concern development of two models for strength and fracture analysis, both based on fracture mechanics …
-
Simulation of Fracture of Concrete Using Micropolar Peridynamics
… constitutive damage model for simulating tensile fracture of concrete using the micropolar peridynamics model. Micropolar peridynamics was proposed by Gerstle in 2007 as a generalization to the bond based peridynamics method introduced by Silling in 2000, which was only capable of handling …
-
LOCALIZING GRADIENT DAMAGE MODELS FOR QUASI-BRITTLE FRACTURE – SIZE EFFECT AND SIMPLE NUMERICAL IMPLEMENTATION
The size effect of a quasi-brittle fracture is associated with the size of fracture process zone relative to the structural characteristic length. In this thesis, the localizing gradient enhancement is adopted to avoid the spurious spreading of damage suffered from the conventional nonlocal …
-
Studies on fiber strength and its effect on paper properties
… properties have a significant effect on the fracture properties of paper. In general, decreases in fiber length and strength lead to a decrease in fracture energy. Higher fiber curl means higher fracture energy, lower breaking tension and higher breaking strain of a paper web. Once the …
-
A numerical model for the simulation of hydrogen embrittlement mechanism in presence of dynamic hydrogen coverage
… to contribute to this goal by using cohesive zone models and amechanistic characterization of the mechanical behaviour in the vicinity of the crack.First, a cohesive crack model is proposed capable of modelling damage due to static andhydrogen embrittlement. The developed numerical framework …
-
Experimental Characterization and Fracture Behavior of Graphene Nanocomposites
… scaling of polymer/graphene nanocomposites. Fracture tests were conducted on geometrically scaled Single Edge Notch Bending (SENB) specimens with varying contents of graphene. It was shown that while the scaling of the pristine polymer follows Linear Elastic Fracture Mechanics (LEFM), this is …
Page 1 of 4