Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 217 for “"Fracture Strength"”.

  1. Fracture Strength of Translucent Zirconia Crowns

    ABSTRACT Objectives: To measure and compare crown fracture load of a new translucent zirconia. Methods: 72 Standarized crown preparations were designed with AutoCAD software with a 0.8mm shoulder margin and 1 mm incisal-cervical marginal curvature. A stylized crown with a 1mm thickness and 0.8mm …

    uab Repository record for Fracture Strength of Translucent Zirconia Crowns (opens in a new tab)

  2. The Fracture Strength of Ceramic Brackets : A Comparative Study

    … conditions and different ligation methods on the fracture strength of ceramic brackets and the yield strength of metal brackets. Ceramic brackets followed the Griffith model, which was used to interpret their fracture strength with respect to their surface condition. With surface damage …

    loma-linda Repository record for The Fracture Strength of Ceramic Brackets : A Comparative Study (opens in a new tab)

  3. Fracture Strength Of All-Ceramic Restorations After Fatigue Loading

    Fracture strength of monolithic and bilayered LAVA and e. max lower molar crowns after load cycling was measured and compared. The study included three groups (n = 8) from LAVA zirconia and three groups from e. max lithium disilicate to compare influences of different layers, thicknesses and …

    uab Repository record for Fracture Strength Of All-Ceramic Restorations After Fatigue Loading (opens in a new tab)

  4. The Fracture Strength of Ceramic Brackets : An Update and Comparison

    The purpose of this study was to compare the fracture strength of ceramic brackets which are currently on the market with ceramic brackets tested in a previous study at Loma Linda. Fracture strengths of standard edgewise ceramic brackets vs. pre-torqued ceramic brackets and bicuspid ceramic …

    loma-linda Repository record for The Fracture Strength of Ceramic Brackets : An Update and Comparison (opens in a new tab)

  5. Effect of Margin Design on Fracture Strength of Zirconia Crown

    Purpose: To compare the fracture load of monolithic Zirconia crowns and E-max crowns with different margin designs and to create a guideline for margin design for monolithic Zirconia crowns. Methods: Digital design of prep maxillary molar tooth was performed with TOC 20 degrees and occlusal …

    uab Repository record for Effect of Margin Design on Fracture Strength of Zirconia Crown (opens in a new tab)

  6. Test Methodologies for Dynamic Fracture Strength of Single Crystal Silicon

    … (MEMS). Therefore, identification of the dynamic fracture strength of SCSi can tremendously aid in virtual qualification of new MEMS devices used in dynamic loading applications. Unfortunately, the fracture strength is influenced by surface flaws, which are functions of microfabrication processing …

    maryland Repository record for Test Methodologies for Dynamic Fracture Strength of Single Crystal Silicon (opens in a new tab)

  7. Fracture Strength of Ceramic Brackets During Buccal-Lingual Archwire Torsion

    … the brackets may be forced apart which may cause fracture. Since bracket fracture may lead to increased treatment time or injury to the patient, a logical question to be explored would be: ''ls there a difference in fracture characteristics among commercially available ceramic brackets?" This …

    marquette Repository record for Fracture Strength of Ceramic Brackets During Buccal-Lingual Archwire Torsion (opens in a new tab)

  8. Novel effects on the fracture strength of poly-crystalline silicon wafers

    … added to the brittleness of silicon, lead to fracture in manufacturing, transportation, and exploitation. The silicon wafers in solar cells are subjected to harsh working environment when used on house and car roofs, since wind blasting and car racing introduce vibrations and the changing …

    unsw Repository record for Novel effects on the fracture strength of poly-crystalline silicon wafers (opens in a new tab)

  9. Fracture strength of the SiC layer in TRISO coated fuel particles

    … geometries; it is important to characterize the fracture strength of this application specific ceramic. Hence, diametrical compression tests were performed on a sample population of SiC hemispheres, which were made from actual TRISO coatings. Multiple numerical analysis methods were used to …

    colo-mines Repository record for Fracture strength of the SiC layer in TRISO coated fuel particles (opens in a new tab)

  10. Fracture Strength of PEEK Hybrid Abutment Restored with Lithium Disilicate Crown

    The purpose of this study was to compare the fracture strength of single lithium disilicate implant-supported crowns fabricated on two-piece abutments with various materials PEEK, zirconia, and lithium disilicate. Materials and methods: Thirty-six implants (Conical connection, 4.3 in diameter and …

    buffalo Repository record for Fracture Strength of PEEK Hybrid Abutment Restored with Lithium Disilicate Crown (opens in a new tab)

  11. Mechanistic understanding of miscibility effects on fracture strength of polymer interfaces

    … on both experiment and theory to understand the fracture behavior as a function of system miscibility for nonreinforced polymer interfaces. The system chosen for study was polystyrene (PS) and the statistically random copolymer poly (styrene-r-4-bromostyrene) (PBS), where the volume fraction of …

    iastate Repository record for Mechanistic understanding of miscibility effects on fracture strength of polymer interfaces (opens in a new tab)

  12. Hip fractures : A biomechanical analysis of fracture strength prediction, prevention, and repair

    Due to the aging population, hip fracture incidence has been increasing over the past decades. Measurements of bone mineral density with dual energy X-ray absorptiometry are the gold standard for hip fracture risk assessment, where patients with a low bone density have a high risk of fracture. …

    lund Repository record for Hip fractures : A biomechanical analysis of fracture strength prediction, prevention, and repair (opens in a new tab) Download PDF for Hip fractures : A biomechanical analysis of fracture strength prediction, prevention, and repair (opens in a new tab)

  13. Fracture Strength of 3D Printed Resin Interim Fixed Partial Dentures Varying Connector Sizes

    … with a milled 3Y-zirconia 9mm^2 group (n=15). Fracture load tested with Instron machine with vertical pressure applied through pontic site at 1mm/min. FPDs placed onto typodont abutments and mounted on Instron machine. Failure was defined as the moment when the load dropped by 10% under the …

    tamu Repository record for Fracture Strength of 3D Printed Resin Interim Fixed Partial Dentures Varying Connector Sizes (opens in a new tab)

  14. Plasma test on Industrial Diamond Powder in Hydrogen and Air for Fracture Strength Study

    … diamonds are used in cutting operations. The fracture strength of diamond is one of the crucial factors that determine its life time as a cutting tool. Glow discharge is one of the techniques used for plasma formation. The glow discharge process is conducted in a vacuum chamber by ionizing gas …

    unlv Repository record for Plasma test on Industrial Diamond Powder in Hydrogen and Air for Fracture Strength Study (opens in a new tab) Download PDF for Plasma test on Industrial Diamond Powder in Hydrogen and Air for Fracture Strength Study (opens in a new tab)

  15. Effect of manganese and nickel on the cleavage fracture strength of ferritic weld metal

    … were used to obtain values for the cleavage fracture strength. This was calculated by reference to slip line field theory from the fracture load at the test temperature where fracture was first coincident with general yielding. The commercial electrodes were first tested in the as welded …

    london-metro Download PDF for Effect of manganese and nickel on the cleavage fracture strength of ferritic weld metal (opens in a new tab)

  16. Quantitative Fracture Strength of Lithiated Tin Oxide Nanowires by In-Situ SEM Tensile Experiments

    The quantitative fracture strength of lithiated and pristine tin oxide (SnO2) nanowires was gathered from in situ scanning electron microscope (SEM) mechanical tests using a micro electromechanical system (MEMS) uniaxial tensile testing device. Stress values were calculated from load and …

    rice Repository record for Quantitative Fracture Strength of Lithiated Tin Oxide Nanowires by In-Situ SEM Tensile Experiments (opens in a new tab)

  17. Development of a Test Methodology to Determine Dynamic Fracture Strength in Microfabricated MEMS Structures

    … subjected to high shock loading, the dynamic fracture strength of the most widely used MEMS material, single crystal silicon (SCSi), is needed. Minimal research has been performed to determine this material property and the research that has been completed suggests that fracture strength …

    maryland Repository record for Development of a Test Methodology to Determine Dynamic Fracture Strength in Microfabricated MEMS Structures (opens in a new tab)

  18. Simulation of fracture strength improvements of a human proximal femur using finite element analysis.

    The most common hip fracture in the elderly occurs as a result of a fall to the side with impact over the greater trochanter resulting in a fracture of the proximal femur. The fracture usually involves the femoral neck or the intertrochanteric region. It has recently been determined that the …

    louisville Repository record for Simulation of fracture strength improvements of a human proximal femur using finite element analysis. (opens in a new tab)

  19. Determination of the fracture strength of brittle material thin films at high temperature using MEMS

    … to different types of failure modes such as fractures and fast aging. A fracture happens when the material splits into two or more pieces due to exceeding the material’s maximum strength. High temperature accelerates fracture in materials leading to premature failure due to crack growth. …

    waterloo Repository record for Determination of the fracture strength of brittle material thin films at high temperature using MEMS (opens in a new tab)

Page 1 of 11