Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 93 for “"Fracture tests"”.
-
Dynamic Tensile, Flexural and Fracture Tests of Anisotropic Barre Granite
… tensile strength, flexural strength and Mode-I fracture toughness/fracture energy of Barre granite is investigated under a wide range of loading rates. Three sets of dynamic experimental methodologies have been developed using the modified split Hopkinson pressure bar system; Brazilian test to …
-
Fracture Tests for Bituminous-Aggregate Mixtures: Laboratory and Field Investigations
… This study investigates the ability to apply fracture mechanics principles to study asphalt concrete cracking through experimental techniques. Single-edge notched beam (SE(B)) and disk-shaped compact tension (DC(T)) test geometries were developed to estimate the fracture energy of asphalt …
-
Aplicabilidade da metodologia de queda de potencial elétrico em testes de fratura monotônica de aços API em meio ácido
… and monitoring of crack growth during monotonic fracture tests of API steels immersed in an acid environment. Fracture mechanics testing in aggressive environments represents a challenge because it is necessary to precisely measure relatively small crack growths in presence of plasticity in the …
-
Fracture of Underfilled and Edge-Bonded BGA-PCB Assemblies: Effects of Joint Geometry, Strain Rate and Stiffness
… The focus of the present research was the fracture performance of component-solder-PCB assemblies with and without underfill adhesives under bending loading conditions. Fracture tests of copperâ solderâ copper double-cantilever-beam (DCB) specimens with a single continuous solder layer …
-
Mechanical properties affecting slicing performance of potatoes
… were subjected to small strain oscillatory shear tests, wedge fracture tests and notched-specimen tensile tests. The degree of feathering on the two new surfaces following the wedge fracture test was quantified. The specimens were prepared from control (8C) and pre-heated (33, 47 or 60C) samples …
-
Development of a fiber optic polarimetric sensor for concrete
… of crack tip opening displacements during fracture tests. A polarization maintaining fiber is used as the sensing element, and transduction mechanism is similar to those of other polarimetric type based sensors. However, the deformation resolving power of the sensor is increased by way of …
-
Protocols and Criteria for Acoustic Emission Monitoring of Fracture-Critical Steel Bridges
… Developing health monitoring systems for fracture-critical bridges is an essential objective in meeting the stated goal. This report documents the implementation of two, 16-sensor, acoustic emission monitoring systems in one of the tie girders of the Cedar Avenue Bridge, which is a …
-
Investigation of Toughening Mechanisms in the Fracture of Asphalt Concrete Using the Clustered Discrete Element Method
… of solid inclusions and a viscous matrix. The fracture of heterogeneous solids is a difficult problem to handle numerically due to the creation and continuous motion of new surfaces. A clustered discrete element method (DEM) is employed as a means to investigate fracture mechanisms in asphalt …
-
Viscoelastic fracture characterization of a solid propellant.
… to be related to geometric and load parameters. Fracture characterization was then performed by experimentally relating the crack tip stress intensity factor to the crack velocity. The theory was applied to solid propellant fracture tests; however, the dewetting behavior of the propellant was not …
-
Evaluation of Fracture Principles in Asphalt Concrete Utilizing the SC(B) Geometry
… to be considered in asphalt concrete, multiple fracture tests and geometries have been used to quantify cracking resistance. One of the most popular geometries that have been used in fracture tests is the Semi-Circular bend (SC(B)). However, for this geometry, most of the fracture test methods …
-
Applicability of miniature-sized test specimens for determining fracture toughness and mechanical properties
… tension (C(T)) test specimen for determining the fracture toughness and mechanical properties of the material was investigated. The main emphasis was on mechanical experiments, supported by finite element (FE) modeling and microstructure characterization. The proportional dimensional and geometric …
-
Application of physics-informed neural network to calibration of a damage-plasticity material model for composites
… realistic datasets from fracturing coupon-level tests, including noisy temporal full-field displacement data and global force data, without the need for local stress data. A coupled damage-plasticity material model, used as an example for the current PINN development, efficiently captures …
-
Enhancing Strength And Toughness Via Reinforcement With Nanocellulose Fibers
… measure molecular orientation in fibers. Tensile tests and fiber-based fracture tests using edge-cracked fibers are used to quantify the enhancement of modulus, strength, and fracture toughness through the addition of CNFs to PMMA. Specifically, a 2× improvement in fracture toughness is observed …
-
Fabrication and Mechanical Characterization of Novel Hybrid Carbon-Fiber/Epoxy Composites Reinforced with Toughening/Self-Repairing Nanofibers at Interfaces
… resin infusion and curing. Mode I interlaminar fracture tests showed that PAN nanofibers can noticeably enhance the fracture toughness of Epon 862 based composites, while the toughening results were scattered for SC-15 resin based system. Furthermore, core-shell dicyclopentadiene (DCPD)/PAN …
-
Surface analysis of sheet molded composite (SMC) material as related to adhesion
… treatments as well as after mechanical lap shear fracture tests for SMCs bonded with urethane adhesive. Surface chemical functionalities, including -C-0·R(X)/-NCOZR and -C=0 (ester carbonyl) groups, were found to promote good adhesion using urethane adhesives. These chemical functionalities_were …
-
Mixed mode I-II-III fracture criterion and its application to cement mortar
… a three-dimensional mixed mode Ia??IIa??III fracture criterion has been derived, by adopting the conversion of pure to mixed mode loading energy, in the ratio of their corresponding fracture energies.In verifying the criterion, various experimental methods have been designed using cement …
-
Computational modeling of hydrogen embrittlement of iron aluminides
Comparative fracture tests of two Fe-28%Al iron aluminides revealed that alloys with B, Zr, and C addition (FA189) are extrinsically more susceptible to environmental embrittlement than the base ternary alloy (FA186) under constant tensile loading condition. This may due to the effect of smaller …
-
The Comparison of Composite Aircraft Field Repair Method (CAFRM) with Traditional Aircraft Repair Technologies
… acid digestion, short beam shear, and mode I fracture tests. The researcher was able to determine the specimen's void content, fiber volume fraction, shear strength, and opening mode interlaminar fracture toughness for the specimens fabricated using the different repair methods. The specimens …
-
Wellbore Strengthening- Nano-Particle Drilling Fluid Experimental Design Using Hydraulic Fracture Apparatus
… by running and analyzing laboratory hydraulic fracture tests on Roubidoux sandstone and concrete cores. Different blends were used to induce and seal fractures in the cores. The blends that increased the core fracture breakdown pressure (fbp) the most with minimal distortion in mud rheological …
-
The investigation of acid/base interactions in the adhesion of carbon fibers to thermoplastic matrices
… exhibited basic properties. Single fiber fracture tests showed that increased acidity in the fiber surfaces (as a result of surface pretreatment) resulted in a significant improvement in the interfacial adhesion to the basic polymers. The acid/base interactions, however, were not solely …
Page 1 of 5