Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 58 for “"Frequency Response Function (FRF)"”.
-
Damage detection in structures using frequency response function (FRF) data and finite element modelling
… a method to detect structural damage using frequency response function (FRF) data obtained from non-destructive vibration tests. The method is used to study cases of early structural damage in which there is no appreciable change in mass and damping. The resulting change in structural …
-
Confidence bands, measurement noise, and multiple input - multiple output measurements using three-channel frequency response function estimator
A three-channel Frequency Response Function (FRF) estimator is discussed and statistical relations developed. Methods for estimating the variance of the FRF magnitude and levels of uncorrelated content in the test signals are developed. FRF magnitude variance estimates allow ’confidence bands’ to …
-
Effects of Viscoelasticity and Hyperelasticity on Attenuation Characteristics of Periodic Foundations
… of interest for such design are first cut-off frequency and band gap width. This research quantifies the effect of viscoelasticity using lumped parameters system—Kelvin-Voigt model and Maxwell model---and layered continuum media. Our goal is to show that band structure of a metamaterial with …
-
Transverse vibrations of a composite cylindrical tube of circular cross section.
… Testing was conducted by measuring the Frequency Response Function (FRF) of the structure after exciting it with an impulse from a modal hammer. Response was measured using an accelerometer. Signal processing was done with a digital signal analyzer and FRFs were analyzed using modal …
-
System Identification of Coupled Vertical and Rotational Stick-Slip Drilling Dynamics on a Modeled Rig for Adaptive Control
… rotational top drive speeds. A non-parametric Frequency Response Function (FRF) for the axial dynamics and rotational dynamics is created and compared to the FRF generated by the parametric system ID method at each rotational speed level. If non-parametric and parametric FRFs are in agreement, …
-
Obtaining The Transfer Function Of A Camera Mount Using ANSYS And MATLAB
In this thesis, the transfer function of a camera mount is obtained using ANSYS and MATLAB. In a heads-up display (HUD) application, achieving precise image registration requires careful consideration of the camera's position relative to the vehicle. Vibrations can alter the camera's position, with …
-
Estimating the Dynamic Characteristics of Road Vehicles Using Vibration Response Data
… of the dynamic characteristics, namely the Frequency Response Function (FRF), of vehicles.
-
Dynamic system characterization and design using mechanical impedance representations
… matching the drive point impedance of a target frequency response function (FRF) using undamped lumped parameter emulators. Two primary techniques have been developed to accomplish this impedance matching: a constrained exhaustive search algorithm and a constrained optimization algorithm. The …
-
Using Vibration Analysis to Determine Refrigerant Levels In an Automotive Air Conditioning System
… is based on the hypothesis that the natural frequency of the accumulator bottle is a function of the mass of refrigerant in the system. Applying this theory to a working automotive air conditioning bench test rig involved using the roving hammer method—forcing the structure with an impact …
-
Noise transmission path identification in a reciprocating freon compressor
… the shell, were used in a multiple reference frequency response function (FRF) analysis with the sound pressure from an external microphone as the reference output. The multiple reference FRF analysis indicates that the suspension springs are the dominant noise transmission path in this …
-
Digital model of shell face milling mechanics and dynamics
… of cutting forces, torque, and power. The Frequency Response Function (FRF) of the cutter is obtained from Finite Element analysis of the digital model of the cutter and used to predict chatter stability and vibrations. The structural dynamics, cutting force prediction and chatter stability …
-
High resolution modal analysis using poles obtained at a single location
… estimates the structure’s poles from a high frequency density, driving point frequency response function (FRF) measured with an accelerometer. Mode vectors are estimated from low frequency density, tightly spaced FRFs measured with a scanning laser velocimeter (SLV) using the poles estimated …
-
Effects of stinger axial dynamics and mass compensation methods on experimental modal analysis
… experimentally. It is found that the measured Frequency Response Function (FRF) can be underestimated if mass compensation is based on the stinger exciter-end acceleration and can be overestimated if the mass compensation is based on the structure-end acceleration due to the stinger's …
-
Robotically Assisted Active Vibration Control in Milling
… dynamics, thereby emulating the robots' dynamic response. Many standard active control methods are evaluated, namely direct velocity feedback (DVF), virtual passive absorber (VPA), proportional integrated derivative (PID), linear quadratic regulator (LQR), H infinity (H∞) and μ synthesis control. …
-
Laser-based broad-band spatially dense automated data acquisition system
… The acquisition system interfaces an SLDV to a frequency analyzer and a Silicon Graphics Crimson workstation. The system allows the user to specify the frequency range, scanning area, and spatial density. The system moves the laser beam, collects and downloads data for the specified area and …
-
Improved Methods for Modeling Dynamic Stage Characteristics
… model calculations, with first-order time lag response functions applied to account for dynamic departures from the steady and quasi-steady performance predictions. This investigation developed a blade frequency response function (FRF) method for describing the dynamic blade response. Once the …
-
Mechanistic force model calibration for milling in multiple materials
… is deconvolved into a force using the frequency response function (FRF) of the system. Calculating the cutting force coefficients (CFCs) for a variety of material and tool combinations will be done utilizing a linear regression method with the mean cutting force from a range of feed per …
-
VIBRATION BASED DAMAGE IDENTIFICATION OF TIME-VARYING DYNAMICAL SYSTEMS
… based method (Methodology I) and, 2) a Sideband Frequency Response Function (FRF) method (Methodology II). One important class of dynamical systems where periodic time-varying parametric terms naturally arise is rotordynamic systems. For the case of a flexible shaft-rotor system with multiple …
-
Hybrid prediction of optimal milling conditions
… neural network model to predict the frequency response function (FRF) at the tool tip and a Bayesian learning method to reach the optimum cutting conditions with the highest material removal rate by a few cutting tests. The spindle assembly is one of the weakest parts in the machine …
-
Automated design and implementation of Kalman observer for spindle torque estimation in CNC machining
… data-driven system identification methods. The frequency response function (FRF) of the spindle dynamics is measured manually using CNC internal diagnostic tools. The identified FRF is then automatically converted to a state-space model using the Eigensystem Realization Algorithm (ERA). To …
Page 1 of 3