Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 31 for “"Frequency equation"”.
-
Some results of the perturbation method applied to two-dimensional non-divergent models in an incompressible fluid
… moving or retrograding waves are considered. The frequency equation resulting from the solution of the boundary systems determined by a sinusoidal velocity profile and a linear shear zone are determined. The frequency equation for a probability curve profile was not fully developed due to …
-
Dynamic response of circular plates to transient and harmonic transverse loads including the effect of transverse shear and rotary inertia
… theory of plate vibration. The governing equations are developed in polar coordinates using the equations of elasticity. Frequency equations for axisymmetric and antisymmetric vibrations are derived for solid circular plates under different boundary conditions and for an annular plate …
-
The computer evaluation of the natural frequencies of vibrating circular plates with free, fixed and simply supported edges
… edge conditions were studied extensively. The frequency equation for each edge condition was derived from the classical partial differential equation of plate vibration. These equations, which are in terms of Bessel functions, were then solved numerically to find the natural frequencies. Since …
-
The use of maximum rate of dissipation criterion to model beams with internal dissipation
… for the derivation of exact expression for the frequency equation of composite beams undergoing forced vibration with damping. The governing differential equations of motion of the composite beam are derived analytically for bending and shear deformation. The basic equations of Timoshenko beam …
-
Feature extraction of intra-pulse modulated radar signals using time-frequency analysis
This thesis applies time-frequency transformations to radar signals. Specifically, it considers the feasibility of applying time-frequency transformations to extract the intra-pulse modulation parameters of radar signals. In this work, we consider radar signals with analog pulse compression; …
-
DETERMINATION OF RESONANCE FREQUENCIES AND VIBRATION CHARACTERISTICS OF STATORS HAVING ENCASED CONSTRUCTION
… is presented in the thesis. As the general frequency equation is derived on a three-dimensonal basis, it delivers information about not only the radial vibrations of the stator but also about torsional and axial vibrations. In addition, the flexural vibrations along the machine-length are …
-
Automotive radar target detection using ambiguity function
… commonly used modulation waveform is the linear frequency modulated continuous waveform (FMCW); the return signal contains the range and velocity information about the target related through the beat frequency equation. Existing techniques retrieve target information by applying a threshold to …
-
Natural frequencies of two elementary rigid frames
… natural frequencies were found by solving the frequency equation which was obtained from the partial differential equation of motion of a distributed mass and elasticity beam. Both motion in the plane of the frame and motion perpendicular to the plane were considered. To verify the analysis, …
-
THEORETICAL AND EXPERIMENTAL INVESTIGATIONS ON RESONANT FREQUENCIES AND NATURAL RESPONSE OF STATORS OF ELECTRICAL MACHINES
… of stators of encased construction. The derived frequency equation is applicable to all modes of vibration and can deliver information about all possible resonant frequencies of a stator. The analysis is based on the three-dimensional theory of elasticity; and it is capable of delivering …
-
Effects of shear deformations on the vibrational frequencies of wide-flanged structures
The well-known Timoshenko beam equations (which include transverse shear deformation and rotary inertia effects) are extended for a wide-flanged structure to include the additional shear lag deformation of the flanges; thus, cross-sections of the beam are allowed to distort instead of remaining …
-
Small oscillations of a beam-column with finite electrical conductivity in a constant transverse magnetic field
… perturbation in the electromagnetic-field. The frequency equation is derived for a column and reduced to that for free vibration of a beam by equating the end load to zero. The roots of this equation are obtained approximately and the effect of the magnetic field on the frequencies is noted. In …
-
Zero Divisors, Group Von Neumann Algebras and Injective Modules
… from Gabor Analysis in the light of the time-frequency equation. We study the zero divisor conjecture in relation to the reduced 𝐶*-algebras and operator norm 𝐶*-algebras. For certain classes of groups we address the zero divisor conjecture by providing an isomorphism between the the reduced …
-
Dynamics of submerged cylindrical shells with eccentric stiffening
… shell. The energy method is utilized and the frequency equation is derived by Hamilton's Principle. All three degrees of freedom are considered. Numerical results are presented for frequencies and mode separation for several cases of interest. Comparisons with previous theoretical and …
-
Lateral vibration of a beam carrying a concentrated mass at the mid-point, including the effect of rotatory inertia
… rotatory inertia of the beam is utilized. The frequency equation involves the product of two terms, roots arising from one of these being associated with symmetric vibration modes and from the other, antisymetric modes. The effect of the rotatory inertia of the beam on the roots of the …
-
Flexural vibration of the incomplete circular ring
… In an attempt to simplify the general equation of motion of the ring an assumption was made that the tangential inertia term had a negligible effect on the natural frequencies of a thin ring. The frequencies obtained from the resulting frequency equation were found to be poor …
-
Coupled flexural and torsional vibrations of beams
… twisting theory is employed to derive the equations of motion, in which the effects of rotary inertia are added to the bending displacements and the effects of warping are added to the twist. Bending translation is restricted to one direction so that one bending equation is used instead of …
-
An Experimental and Theoretical Investigation into the Acoustic Spectra of Solids Having Cylindrical Symmetry
… each of pure radial (compressional), finite frequency and asymptotic (compressional) modes. Several limiting cases obtained by simplifying the thick annular disk frequency equation, using various approximations, were investigated. Of these, the most important one is the frequency equation …
-
The vibrational modes of spheroidal cavities in elastic solids
… of coordinate systems separating the scalar wave equation. 112 such shapes are identified and discussed. Free boundary condition equations for spheres and spheroids are derived in complete generality in terms of potentials. The difference in the vibrations of a solid and those of a cavity of the …
-
Direct Determination of the Dynamic Elastic Modulus and Poisson's Ratio of Timoshenko Prisms and Rods
… exact solution of the Timoshenko beam vibration frequency equation under free-free boundary conditions was determined with an accurate shear shape factor. The exact solution was compared with a 3-D finite element calculation using ABAQUS program, and the difference between the exact solution and …
-
Acoustic waveguide characteristics of gas transmission pipelines
… in each of the four layers are derived. The frequency equation is derived from continuous displacement and stress boundary conditions. From these equations, the longitudinal mode wave motions in four different waveguides are calculated. The four waveguides represent typical gas transmission …
Page 1 of 2