Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 31 for “"Friction Pendulum"”.
-
Effects of Ice and Water Contamination on Friction Pendulum Bearings
… have been several reports on water contaminated Friction Pendulum System (FPS) bearings across the country. Additionally, there is a concern in Alaska that water will freeze inside the bearing during the winter, potentially restraining the slider from moving along the bottom concave surface. The …
-
Influence of Vertical Ground Motion on Bridges Isolated with Friction Pendulum Bearings
… Vertical Ground Motion on Bridges Isolated with FrictionPendulum BearingsThe motivation for this project comes from test of a full scale building isolated withtriple friction pendulum bearings on E-defense shake table at Japan. The test demonstratedexperimentally that the vertical motion can …
-
Degradation of Dissipative Characteristics of Friction Pendulum Isolators due to Thermal Effect
… of the research is to predict the reliability of friction pendulum devices during their service life. These bearings are characterized by the capability to undergo large displacements despite their compact size. This peculiar property makes this device competitive among other commonly used …
-
Thermal Analysis and Experiment Design for Seismic Performance Evaluation of Ice and Water Contaminated Friction Pendulum Bearings
… have been several reports on water contaminated Friction Pendulum System (FPS) bearings across the country. Additionally, there is a concern in Alaska that water will freeze inside the bearing during the winter, potentially restraining the slider from moving along the bottom concave surface. The …
-
Development of Performance-Based Testing Specifications for Seismic Isolators
… isolation systems (total of 96 systems, single friction pendulum, triple friction pendulum and lead-rubber), three different seismic hazards as measured by the spectral acceleration at the period of one second, and a large collection of bi-directional ground motions with short- and long-duration …
-
Experimental and Numerical Study on the Extreme Behaviors of Sliding Isolation Bearings
… systems under extreme conditions. Using a double friction pendulum bearing with non-articulated slider as an example, this thesis comprehensively investigates the extreme behavior of the sliding bearing components as well as steel frame buildings isolated using these bearings. This thesis is …
-
Application of Base Isolation Systems to Reinforced Concrete Frame Buildings
… hybrid isolation system of rubber bearings and friction pendulum bearings were analysed. The effectiveness of the three base isolation systems considered in enhancing structural performance was investigated. The results show the level of improvement attained in seismic response by each system. …
-
High performance friction-type bearings for seismic isolation
… most commonly used base-isolation systems is the friction pendulum system (FPS). It provides excellent re-centering and large energy dissipation capacities. Despite these benefits, FPSs are rarely used in the U.S. for several reasons. Out of many one may identify, the required peer review process …
-
The Role of Seismic Isolation in the Deployment of Advanced Nuclear Reactors
… were tested: non-isolated, isolated using single Friction Pendulum (SFP) bearings, and isolated using triple Friction Pendulum (TFP) bearings. The vessel was subjected to three component ground motions using a 6 degrees-of-freedom earthquake simulator. The vessel was filled with water during …
-
Διερεύνηση της δυναμικής απόκρισης ιστορικών μνημείων λικνιζόμενων υπό σεισμική διέγερση και της συνεισφοράς εφεδράνων τριβής πολλαπλής καμπυλότητας στη σεισμική τους θωράκιση
… monumental structures is studied. Double friction pendulum (DFP) and triple friction pendulum (TFP) bearings are examined. In order to estimate the effectiveness of the base isolation on the seismic mitigation the alteration of the characteristics of the seismic signal which is propagated …
-
Issues of seismic response and retrofit for critical substation equipment
… mitigation investigated is the use of the Friction Pendulum System (FPS) bearings to seismically isolate transformers. This is done by developing a finite element model representing the behavior of FPS bearings and implementing this model on to ADINA finite element package for further use …
-
Seismic Performance Comparison of a Fixed-Base Versus a Base-Isolated Office Building
… system that is utilized is composed of Triple Friction Pendulum (TFP) bearings. The work of this thesis is divided into four phases. First, in the building selection phase, the structural systems (SMF and SCBF), layout, location (San Diego, CA), and design parameters of the buildings are …
-
Σεισμική τρωτότητα και βέλτιστη αντιμετώπιση της σεισμικής διακινδύνευσης δεξαμενών αποθήκευσης υδρογονανθράκων
… storage tanks isolated by various types of friction isolators has been studied in terms of isolators maximum displacement capacity. The tanks are base-isolated via Single Friction Pendulum Bearings (SFPB), Triple Friction Pendulum Bearings (TFPB), as well as Quintuple Friction Pendulum …
-
Mechanics, Characterization, and Design of an Adaptive Variable Friction Base Isolation System
… high displacements. Thus, the Adaptive Variable Friction (AVF) bearing is presented as a simple isolation alternative, capable of changing period as a function of ground motion intensity. This thesis studies the behavior of the AVF bearing and develops and tests a Direct Displacement Based Design …
-
Periodic Material Based Seismic Base Isolation of Nuclear Power Plants
… rubber bearings; lead-rubber bearings; and friction pendulum bearings, large relative displacements occur between upper structures and foundations; only isolation in a horizontal direction is provided, which is undesirable for the piping systems. The concept of periodic materials, based on …
-
Seismic performance of CLT structures with base isolation
… and inter-storey drift. In general, the friction pendulum isolators showed higher reduction than rubber isolators. The effect of aspect ratio on seismic behavior of non-isolated and isolated CLT structures was also investigated. A comparison is made between different aspect ratios (1:1 …
-
Practice-Oriented Seismic Design and Retrofit for Mid-Story Isolated Buildings
… and three-degree-of-freedom models with a triple friction pendulum (TFP) isolator behavior. The analysis considers 7000 ground-motion records, multiple isolated mass ratios, structural periods, damping levels, and ductility levels. The results show that the isolated mass ratio and the period or …
-
Fluid-Structure Interaction in an Isolated Nuclear Power Plant Comparing Linear and Nonlinear Fluid Models
… a two-part study on a base isolated NPP with friction pendulum bearings. The first part of the study compares the usage of a linear fluid model to a nonlinear fluid model in determining tank and structural demand parameters. The linear fluid model was found to represent the nonlinear fluid …
-
The development of a detailed seismic performance assessment : a framework for China's HSR MSSS bridge system
… the design of the HSR MSSS bridge system using friction pendulum devices. The results show that the most optimal seismic loss of the isolated HSR MSSS bridge system can be reduced by 90% when compared to the that in the absence of seismic isolation.
-
Shake Table Testing and Model Validation of a Seismic Isolation System for Lightweight Structures
… well-established isolation techniques, such as friction pendulum type bearings, which are not low-cost isolation systems for lightweight structures. Previous studies on low-cost isolation systems for lightweight structures showed that isolation devices with rolling elements are better suited for …
Page 1 of 2