Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 49 for “"Friction Surface"”.

  1. CHARACTERIZATION AND MODELING DETERIORATION OF HIGH FRICTION SURFACE TREATMENT

    … a fraction of the roadway network. High Friction Surface Treatment (HFST), composed of a thin layer of calcined bauxite aggregate on resin-binder, is used to improve friction on curved roadways, especially on curves that have a high friction demand and a history of roadway departure …

    gatech Repository record for CHARACTERIZATION AND MODELING DETERIORATION OF HIGH FRICTION SURFACE TREATMENT (opens in a new tab)

  2. Laboratory evaluation of an innovative and cost effective high-friction surface treatment

    High Friction Surface Treatment (HFST) is a surface treatment that can effectively improve the frictional characteristics of pavements and enhance the users' safety on the road. Among all existing applications of HFSTs, bauxite and oil-based epoxy resin are the most commonly used materials in the …

    msu Repository record for Laboratory evaluation of an innovative and cost effective high-friction surface treatment (opens in a new tab)

  3. Ultra High-Performance Concrete As a High Friction Surface Treatment for Pavements and Bridges

    High Friction Surface Treatment (HFST) is a proven technology to reduce crashes on roadways by increasing the coefficient of friction between vehicle tires and the pavement. However, it is an expensive solution due to the high cost of the two commonly used constituent materials, calcined bauxite …

    clemson Repository record for Ultra High-Performance Concrete As a High Friction Surface Treatment for Pavements and Bridges (opens in a new tab)

  4. Autonomous Vehicle Obstacle Avoidance Maneuvers: Analytical and Experimental Development of Friction Surface Dependent Path Planning and Control

    … of an autonomous vehicle when faced with reduced friction due to snow and ice on the road when attempting a double lane change obstacle avoidance maneuver. Two low friction scenarios as well as an improvement to simulation methods are presented. The first low friction scenario an autonomous …

    mtu Repository record for Autonomous Vehicle Obstacle Avoidance Maneuvers: Analytical and Experimental Development of Friction Surface Dependent Path Planning and Control (opens in a new tab)

  5. Proportioning and Performance of Ultra-High Performance Concrete (UHPC) for High Friction Surface Treatment (HFST) on Pavement and Bridge Decks

    High Friction Surface Treatment (HFST) is a roadway remediation technique used to improve pavement’s coefficient of friction, to enhance roadway safety. The application of HFSTs has repeatedly demonstrated the ability to significantly reduce crashes in both wet and dry conditions. Typically, …

    clemson Repository record for Proportioning and Performance of Ultra-High Performance Concrete (UHPC) for High Friction Surface Treatment (HFST) on Pavement and Bridge Decks (opens in a new tab)

  6. The use of friction-surface processing as a method of corrosion protection of a friction-stir weld in the AL-LI-CU alloy AA2050-T851

    Friction-surface processing (FSP) was explored as a possible method for mitigating corrosion of a friction-stir weld (FSW) in the Al-Li-Cu alloy AA2050-T851. The microstructure, hardness and corrosion behaviour of the base alloy, the FSW and the FSP regions was examined. The base alloy showed …

    birmingham Download PDF for The use of friction-surface processing as a method of corrosion protection of a friction-stir weld in the AL-LI-CU alloy AA2050-T851 (opens in a new tab)

  7. Using Cost Surface Analysis and Least Cost Paths to Analyze Dispersal of Gray Wolves in the Northern Rockies, U.S.A.

    … species. The following study employs cost surface analysis to model wolf movements across the Northern Rockies region. An examination of wolf habitat selection in the region allows for the development of a friction surface by assigning different friction values to several landscape …

    texas-state Repository record for Using Cost Surface Analysis and Least Cost Paths to Analyze Dispersal of Gray Wolves in the Northern Rockies, U.S.A. (opens in a new tab)

  8. Plastic Deformation Investigation Of High Energy Input Friction

    In this dissertation, plastic deformation of friction surfaces under high energy input is investigated. The plastic deformation of the friction surface and subsurface was studied and models were established to estimate deformation. In order to calculate the plastic deformation at friction surface, …

    marquette Repository record for Plastic Deformation Investigation Of High Energy Input Friction (opens in a new tab)

  9. Otimização da rota de linhas de transmissão utilizando uma metodologia de avaliação multicritério

    … Units and Land Use). After this, the cost surface, or friction surface, of the studied site is obtained. With this surface, a graph algorithm is applied to determine the optimized route of the transmission line, which is the final product of the present work.

    brazil-uerj Repository record for Otimização da rota de linhas de transmissão utilizando uma metodologia de avaliação multicritério (opens in a new tab)

  10. The Influence of Occupational Footwear on Slip Responses

    … where individuals walked over a sheet of high friction aluminum foil. On the sixth trial and without the participant’s knowledge, the aluminum foil was replaced with a low friction hard plastic surface to induce an unexpected slip. The remaining six trials were conducted over the low friction …

    brock Repository record for The Influence of Occupational Footwear on Slip Responses (opens in a new tab)

  11. Derivation of an Evolution Equation for Two-Dimensional Waves on Thin Films

    … on thin liquid films subjected to gravity, fluid friction, surface tension, and Marangoni effects. The physical configuration is a thin liquid layer on a planar incline. Following previous studies, the Marangoni effect is incorporated by a constant surface tension gradient and yields a non-convex …

    vt Repository record for Derivation of an Evolution Equation for Two-Dimensional Waves on Thin Films (opens in a new tab)

  12. Imaging fiber orientation in articular cartilage using optical polarization tractography

    … cartilage plays a vital role in providing a low-friction surface between the bones of joints. This mechanical function is highly related to the special collagen organization in cartilage, especially in the superficial zone. The "split-line" method has been previously used to examine the fiber …

    missouri Repository record for Imaging fiber orientation in articular cartilage using optical polarization tractography (opens in a new tab)

  13. CONTROL OF TRIBOFILMS FORMATION IN MACHINING HARD MATERIALS

    … design and development of cutting tools and surface treatment technology relevant to machining. The central goal of cutting tool technology is to increase productivity while simultaneously reducing cost and meeting the quality targets of the machined parts. This thesis considers a …

    mcmaster Repository record for CONTROL OF TRIBOFILMS FORMATION IN MACHINING HARD MATERIALS (opens in a new tab)

  14. ADVANCED PHOSPHORUS BASED MIGRATION RESISTANT ANTI-OXIDANTS FOR CARBON-CARBON COMPOSITE AIRCRAFT BRAKES WITH INCREASED CATALYTIC OXIDATION RESISTANCE

    … steel brakes, and they attain strength and frictional properties at temperatures up to 1600°C. C/C composite brakes can endure high temperatures, but in the presence of oxygen they will begin to oxidize at 400°C. Anti-oxidant systems must be applied to the non-rubbing surfaces of the C/C …

    siu-theses Repository record for ADVANCED PHOSPHORUS BASED MIGRATION RESISTANT ANTI-OXIDANTS FOR CARBON-CARBON COMPOSITE AIRCRAFT BRAKES WITH INCREASED CATALYTIC OXIDATION RESISTANCE (opens in a new tab)

  15. Brake squeal analysis in time domain using ABAQUS - Finite element simulation of brake squeal for passenger cars

    … of a brake disc, and pair of brake pads (friction material and backplate). Using the CEA method, brake squeal frequencies are identified by coalescence modes and calculation of Negative Damping Ratio (NDR) for various pressure and friction coefficient. As a comparison with CEA, TDA is …

    chalmers Repository record for Brake squeal analysis in time domain using ABAQUS - Finite element simulation of brake squeal for passenger cars (opens in a new tab)

  16. In-situ Interface Chemical Characterisation of a Boundary Lubricated Contact

    … despite considerable efforts, a model to predict friction coefficient is only limited to elastohydrodynamic and hydrodynamic lubrication systems. Under boundary and mixed lubrication conditions, the friction and wear behaviour of the tribological system are characterised by the surface asperities …

    whiterose Download PDF for In-situ Interface Chemical Characterisation of a Boundary Lubricated Contact (opens in a new tab)

  17. 7-DOF Robotic Arm XY-Plane Translational Stability

    … effects of an arm operating on a simulated zero-friction surface and provide a method to anticipate and stabilize these induced forces. By calculating the forces generated by the movement of a 7-DOF Sawyer robotic arm using the arm’s Universal Robotics Description Format (URDF) parameters …

    embry-riddle Repository record for 7-DOF Robotic Arm XY-Plane Translational Stability (opens in a new tab)

  18. Development and analysis of active rear axle steering for 8x8 combat vehicle

    … in between 20 km/h and 80 km/h over low friction (μ =0.35) and high friction (μ=0.85) surfaces. The rollover prevention capabilities of the controllers are evaluated using a fishhook maneuver over a high friction surface and damping of external disturbances will be tested using a …

    uoit Repository record for Development and analysis of active rear axle steering for 8x8 combat vehicle (opens in a new tab)

  19. Investigations of the Composition-Function Relationships in Normal, Degraded, and Engineered Articular Cartilage Using Epic-Microcomputed Tomography

    Articular cartilage provides a low-friction surface during normal joint motion and distributes forces to the underlying bone. The extracellular matrix (ECM) composition of healthy cartilage has previously been shown to be an excellent predictor of its mechanical properties. Changes in ECM …

    gatech Repository record for Investigations of the Composition-Function Relationships in Normal, Degraded, and Engineered Articular Cartilage Using Epic-Microcomputed Tomography (opens in a new tab)

Page 1 of 3