Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 18 of 18 for “"Friction brake"”.
-
Experimental investigations and finite element analyses of interface heat partition in a friction brake system. New modelling paradigm for describing friction brake systems to support studies of interface temperature, contact pressure, heat flux distribution and heat partition ratio by experiment and FE simulation
… considerations for developing effective disc brake system performance. Very high braking temperatures can introduce effects detrimental to performance such as brake fade, premature wear, brake fluid vaporization, bearing failure, thermal cracks, and thermally-excited vibration [2]. This …
-
Finite Element Simulation of Energy Loss in Friction Brakes
… to energy loss in a vehicle is crucial. Brake drag is one such mechanism, and it is estimated to account for around 3% of energy loss in a vehicle. Improving the energy efficiency of friction brakes can help address range anxiety and improve the overall performance of electric vehicles. …
-
Scaling and function of spider safety line
… out more silk as they fall. By activating a friction brake, gravitational energy can be converted to heat which prevents the silk from being overloaded. The possible sources of friction available to a falling spider, namely the rear leg grabbing the silk, and an internal friction brake, were …
-
The effect of corrosion on the particle emissions emitted from different brake rotor materials
… to attempt to cap the emissions produced by a friction brake system. This has prompted brake manufacturers to seek alternative solutions to reduce the emissions generated by conventional grey cast iron (GCI) friction brake systems. With electric vehicles becoming the future of modern vehicles, …
-
MODELING CHEVY VOLT GEN II SUPERVISORY CONTROLLER IN CHARGE SUSTAINING OPERATION
… blending logic for charge sustaining along with friction brake modeling. The model has been developed to perform energy analysis and comparison based on on-road vehicle experimental data. The overall model validation is done using the three standard FTP driving schedules and a driving schedule …
-
Improving and Evaluating Hydraulic Front Wheel Drive for Trucks
… differential lock by using the conventional friction brake to reduce the speed of the wheel that are struggling more for grip. This kind of system is already used at the rear driven wheel and should be rather easy to implement at front as well.
-
Lightweight friction brakes for a road vehicle with regenerative braking. Design analysis and experimental investigation of the potential for mass reduction of friction brakes on a passenger car with regenerative braking.
… braking (RB) will minimize duty levels on the brakes, giving advantages including extended brake rotor and friction material life and, more significantly, reduced brake mass and minimised brake pad wear. In this thesis, a mathematical analysis (MATLAB) has been used to analyse the accessibility …
-
An investigation into frictional surface interactions and their effect on brake judder.
… or Third-Body Layer (T.B.L.) formed at the friction interface of an automotive friction brake during off-brake motoring has been studied using Energy Dispersive X-ray (E.D.X.) analysis and Scanning Electron Microscopy (S.E.M.). Although these third-body layers are deposited on both mating …
-
DEVELOPMENT OF NEW FRICTION MATERIAL FOR VEHICLES WITH REGENERATIVE BRAKING SYSTEMS
Regenerative braking in conjunction with friction braking represents one of the most common braking strategies employed in electric and hybrid vehicles. As the friction brake accounts for about 5 to 85% of total braking in these “blended scenarios”, this warrants for more research into the …
-
Analysis of regenerative braking in electric machines
… the electric machine assists the mechanical friction braking system of the vehicle, it results in reduced wear on components within the mechanical friction brake system. As both mechanical friction braking and electric machine braking are used to provide the requested vehicle braking torque, …
-
Evaluation of wheel torque coordination strategies for heavy battery electric vehicles
… from a tarmac road with high coefficient of friction to a low friction road. Modular E-axles such as cruise and startability axles have been introduced in this research with different types of electric machines and gear ratios to make it a reliable, cost efficient and effective setup for …
-
Electric Vehicle Blended Braking maximizing energy recovery while maintaining vehicle stability and maneuverability.
… ‘Electric Vehicle Blended Braking’. A blended brake control merges a regenerative brake system with a friction brake system. The aim is to get a better understanding regarding to what extent a regenerative brake system is capable of recovering energy and how it will affect vehicle stability and …
-
Test Procedures and Evaluation Tools for Passenger Vehicle Dynamics
… Pulse input, Braking with split coefficient of friction, Brake in turn and Straight braking. In order to give the user freedom to adjust the tests based on current requirements, all test procedure constants, e.g. times, velocities and distances, have been parametrized using an excel reference …
-
Modelling and simulation of themo-mechanical phenomena at the friction interface of a disc brake.An empirically-based finite element model for the fundamental investigation of factors that influence the interface thermal resistance at the friction interface of a high energy sliding pair in a disc brake.
… theories of heat generation and transfer at the friction interface of a brake assume either matching or not matching surface temperatures by having a varying or uniform heat partition ratio respectively. In the research presented the behaviour of heat partition has been investigated in a …
-
Performance evaluation of friction damped braced steel frames under simulated earthquake loads
… obtained from qualification tests of a new friction damping system, which has been proposed in order to improve the response of Moment Resisting Frames and Braced Moment Resisting Frames during severe earthquakes. The system basically consists of a special inexpensive mechanism containing …
-
Test Vehicle for Regenerative Braking Emulation
… stability and the driver‟s perception of the brake system. The impact of the human factor imposes the use of a test vehicle during development of regen braking strategies. The production of a regen braking test vehicle was initiated by SAAB as part of their Hybrid Vehicles and eAWD project and …
-
Sliding Mode Controller Design for ABS System
… limit the heat dissipation function of the friction brake, electromagnetic brakes work in a relatively cool condition and avoid problems that friction brakes face by using a totally different working principle and installation location. By using the electromagnetic brake as supplementary …
-
Provozní a odlehčovací brzdy užitkových vozidel
Táto bakalárska práca je odbornou rešeršou, pojednáva o brzdení úžitkových vozidiel. Práca je rozdelená na šesť základných častí. Prvá časť sa zaoberá históriou vzniku bŕzd. Druhá časť oboznamuje so základnou terminológiou a samotnou definíciou pojmu brzdenia. Tretia časť pojednáva o rozdelení …