Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 644 for “"Friction coefficient"”.

  1. Study of the soil-reinforcement friction coefficient

    … methods for measuring a soil-reinforcement friction coefficient. Previous research work pertaining to soil-reinforcement friction mobilization, including testing methods and the relative influences of different factors affecting the value of the soil-reinforcement friction coefficient has …

    glasgow Download PDF for Study of the soil-reinforcement friction coefficient (opens in a new tab)

  2. Experimental evaluation of effective friction coefficient for liquid ring seals

    … dependent upon several parameters, including the friction holding force between the sealing face and the mating retaining ring. Designers currently assume a value for effective friction coefficient in order to utilize methods for prediction of response and stability. This thesis presents the …

    vt Repository record for Experimental evaluation of effective friction coefficient for liquid ring seals (opens in a new tab)

  3. Tire-Road Friction Coefficient Estimation and Control of Autonomous Vehicles

    … integrating with the estimated tire-road friction coefficient (TRFC) so as to enhance the safety and reliability of the autonomous vehicles (AVs) under varying road friction conditions. A two-stage hierarchical framework is firstly developed for estimating TRFC in a computationally …

    concordia Download PDF for Tire-Road Friction Coefficient Estimation and Control of Autonomous Vehicles (opens in a new tab)

  4. Model-based estimation of AMT vehicle clutch kinetic friction coefficient

    … gear-shifting strategy. The kinetic clutch friction coefficient is important to know to develop an optimized gear-shifting algorithm.This thesis focus on estimating dynamic kinetic friction coefficient between two clutch plats of an automated manual transmission (AMT) vehicle when speed and …

    msu Repository record for Model-based estimation of AMT vehicle clutch kinetic friction coefficient (opens in a new tab)

  5. Tire-Road Friction Coefficient Estimation Using a Multi-scale, Physics-based Model

    … and steady-state maneuvers is predicated on the friction forces generated at the tire-road interface. A general method for predicting friction coefficients for an arbitrary asphalt pavement surface would be an invaluable engineering tool for designing many vehicle safety and performance features, …

    vt Repository record for Tire-Road Friction Coefficient Estimation Using a Multi-scale, Physics-based Model (opens in a new tab)

  6. The friction coefficient of soft contact lens surfaces in relation to comfort and performance

    … tensile characteristics. It is likely that the frictional properties also vary between materials. It is known that constituents of the tear film interact with contact lens materials to form a biofilm on the lens surface. The hypothesis of this research is that although the frictional properties …

    city-london Download PDF for The friction coefficient of soft contact lens surfaces in relation to comfort and performance (opens in a new tab)

  7. Experimental modelling of surface roughness and dynamic friction coefficient of diamond like carbon coated shafts

    … with DLC often have strict surface roughness and friction coefficient goals. This research investigates the surface roughness and friction coefficient properties of uncoated and DLC coated specimens in an effort to satisfy two particular requirements of the industry. The first requirement is to …

    uoit Repository record for Experimental modelling of surface roughness and dynamic friction coefficient of diamond like carbon coated shafts (opens in a new tab)

  8. Modeling the influence of surface pitting on contact pressure and friction coefficient under elastohydrodynamic lubrication conditions

    … distributions, lubricant film thickness, and friction coefficients. In this thesis, we examine the consequences of surface pitting on the line contact problem. The thesis first tackles the modeling of the dry contact between two cylinders. The considered approach is based on the Hartnet …

    ets-quebec Download PDF for Modeling the influence of surface pitting on contact pressure and friction coefficient under elastohydrodynamic lubrication conditions (opens in a new tab)

  9. New sensors and estimation systems for the measurement of tire-road friction coefficient and tire slip variables.

    … developed for the estimation of tire-road friction coefficient and tire slip variables on highway vehicles. The first part of the thesis focuses on the development and experimental evaluation of a friction estimation system based on a novel adaptive feedforward vibration cancellation …

    umn Repository record for New sensors and estimation systems for the measurement of tire-road friction coefficient and tire slip variables. (opens in a new tab)

  10. Evaluation of Coated Top Foil Bearings: Drag Friction Coefficient, Operating Drag Torque and Lift-Off Speed, and Dynamic Force Coefficients

    … bump-type foil bearings (BFBs) have issues of dryfriction during sliding contact at rotor start/stop cycles. To prevent premature wear of both shaft and the BFB, the proper selection and application of a coating on the top foil is of importance to ensure bearing long life. This thesis presents …

    tamu Repository record for Evaluation of Coated Top Foil Bearings: Drag Friction Coefficient, Operating Drag Torque and Lift-Off Speed, and Dynamic Force Coefficients (opens in a new tab)

  11. Improving the throughput of plasticating extruders : measurement of the interparticulate friction coefficient for polymeric particulates with circular and profiled cross sections

    <p>This thesis deals with the coefficient of friction between individual polymeric pellets, the interparticulate friction coefficient (IPFC). It has been measured using a shear cell for a wide variety of circular and profiled cross?section pellets for a variery of polymeric materials. First, the …

    njit Repository record for Improving the throughput of plasticating extruders : measurement of the interparticulate friction coefficient for polymeric particulates with circular and profiled cross sections (opens in a new tab)

  12. Improving the throughput of plasticating extruders : manufacture of non-circular pellets, measurement of their interparticulate friction coefficient, and implications for screw design

    … the hypothesis that the interparticulate friction coefficient of a bed of polymeric particulates is a function of the cross-section of the pellets. Most pellets have a circular cross-section especially those that are strand cut. But when such pellets constitute a particulate bed there are …

    njit Repository record for Improving the throughput of plasticating extruders : manufacture of non-circular pellets, measurement of their interparticulate friction coefficient, and implications for screw design (opens in a new tab)

  13. The Sliding Friction of Bonded Solid Lubricants

    … of papers containing detailed data about the friction and wear of BSL coatings. The general theories of friction for metals in sliding contact and the friction theory applied to solid film lubrication are reviewed. A section is also included on Herzian contact theory and its application to …

    cent-lancashire Download PDF for The Sliding Friction of Bonded Solid Lubricants (opens in a new tab)

  14. Quantifying the Effect of Friction Coefficients on the Sim-to-Real Gap in Mobile Robot Path Tracking Simulations on Varied Terrain

    … are, or how simulation parameters such as the friction coefficient may impact the sim-to-real gap in practical use cases. To support a more nuanced and resource-effective application of simulations, this thesis presents the validation of several mobile robot path-tracking simulations in the …

    tamu Repository record for Quantifying the Effect of Friction Coefficients on the Sim-to-Real Gap in Mobile Robot Path Tracking Simulations on Varied Terrain (opens in a new tab)

  15. The effects of water displacing corrosion preventatives on the fatigue behaviour of mechanically fastened aluminium joints

    … effect of WDCP is assumed to give a reduction in friction coefficient. Three types of stress reduction factors are proposed in the net-section failure model to account for these parameters. The stress reduction factors modify stress range that is used in crack growth calculation. If there are no …

    unsw Repository record for The effects of water displacing corrosion preventatives on the fatigue behaviour of mechanically fastened aluminium joints (opens in a new tab)

Page 1 of 33