Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 18 of 18 for “"Friction layer"”.
-
The relationship between the vertical motion at the top of the friction layer and the geostrophic vorticity as a function of the Rossby number.
… vertical motion at the top of the boundary layer, geostrophic vorticity in the boundary layer and divergence in the boundary layer are examined in this study. The equation of motion and the continuity equation are applied to a homogeneous barotropic atmosphere using a numerical model in this …
-
DESIGN AND OPTIMIZATION OF LOW-Cu AND Cu-FREE AUTOMOTIVE BRAKE FRICTION MATERIALS
… for formulating low-Cu and Cu-free brake friction materials without using and releasing hazardous materials that are listed on Washington State and California State Senate Bills. Model brake material samples were manufactured and tested in the Friction Assessment and Screening Test (FAST) …
-
Tribological Studies of Advanced Materials for Aerospace Braking Applications
… stability, and most importantly deliver stable friction coefficient and high wear resistance. Amidst ever-developing technologies, the need for advanced materials to provide the required and desired mechanical, environmental, and stable combination, which is expected off a braking system, is …
-
The prediction of metal flow and properties in three-dimensional forgings using the finite element period.
… to the incorrect imposition of very high friction by the friction-layer technique used in the analysis. With a corrected form of the friction technique, the finiteelement program predicts results for the axisymmetric friction-ring test and a new three-dimensional friction test which are in …
-
Detailed investigation of lime-cement columns in quick clay during construction
… by excess pore pressure in the permeable soil layers and by remoulding of the clay. Due to the high sensitivity of quick clay, remoulding can result in a significant loss of shear strength. The excess pore pressure is generated by the air pressure used to inject the binder during installation. …
-
Automotive Brake Materials: Characterization of Wear Products and Relevant Mechanisms at High Temperature
… premature failure. In this regard, wear and friction behavior of friction materials and the characterization of wear debris from brake disc system is an important step to understand the dominant wear mechanisms active in a given tribological system, in order to improve its performances and to …
-
Design and Fabrication of Polyvinylidene Fluoride for Triboelectric Nanogenerators
… effects of polyvinylidene fluoride (PVDF) friction layers thickness, contact area and porosity on TENGs performance were investigated. Results showed that increasing surface area or decreasing thickness of friction layer positively affected the performance of TENG. This is mainly attributed …
-
On Settlements in Urban Areas with Soft Clay - As a result of leakage to deep excavations via an underlying permeable layer
… area around the excavation consists of a thick layer of low permeable clay, underlain by a few metres of friction material followed by bedrock. Most of the inflow is expected to occur via the friction layer. The pore pressure reduction will thus initially take place in the friction material and …
-
Numerical Modelling of Subsidence due to Tunnel Excavation
… the stratigraphy, a rather horizontal soil layering was found, with a clay layer approximately 20 meters thick. In the middle of the clay layer a permeable layer of friction material was found. The bottom layer is a stiff friction layer, which mainly consists of sand and overlies the …
-
Liquid-metal-based strain sensor, tilt sensors, and triboelectric nanogenerators (TENGs).
… is the spontaneous formation of a thin oxide layer (~3 nm) in ambient air, which is mechanically robust and adhesive. This dissertation presents strategies for utilizing an oxidize layer of liquid metal as an adhesive conductor and engineering surfaces of materials non-wetting to oxidized …
-
DEVELOPMENT OF NEW FRICTION MATERIAL FOR VEHICLES WITH REGENERATIVE BRAKING SYSTEMS
Regenerative braking in conjunction with friction braking represents one of the most common braking strategies employed in electric and hybrid vehicles. As the friction brake accounts for about 5 to 85% of total braking in these “blended scenarios”, this warrants for more research into the …
-
Relationship between brake system vibrations and particulate matter emissions in a reduced-scale dynamometer
… performance and particulate emissions of the friction materials. However, a detailed multi-factor comparison between pin-on-disc and reduced-scale dynamometer tests is missing, despite its importance for understanding their results. In addition, a systematic study of the squeal propensity of …
-
Development of novel eco-friendly friction materials for disc brake systems
… in the toxic substances contained in brake friction materials is required that still meets all applicable safety standards and retaining properties such as low wear, high temperatures resistance, friction coefficient stability and consistency. Among the various ingredients used in …
-
Particulate Matter Emission Issues in Brake Systems
… Chapter 2 provides a brief description of the friction and wear, as well as the fundamental principles of braking by contact. Chapter 3 discuss the disc braking system, with particular attention to the pad friction materials. Chapter 4 is dedicated to friction layer: the layer usually …
-
Thermomechanical Stabilities in Automotive Brakes & Clutches Systems
… thermal stress resulting from sliding contact of frictional materials. These three contributions collectively and the discussion of them herein form a collective basis furthering the research and understanding within this field. Firstly, the effect of convective cooling on thermoelastic …
-
Comparing Equestrian Helmets with and without Rotational Technology Using an Equestrian Concussive Specific Helmet Test Protocol
… impact protection system (MIPS), employs a low friction layer to reduce the amount of rotational acceleration sustained by the brain during head impacts. MIPS tests equestrian helmets using a monorail drop rig with a 45-degree steel anvil covered in 80 grit sandpaper at 6.2 m/s. The surface …
-
Nanoscale triboelectrification of two-dimensional chemical vapor deposited transition metal dichalcogenides
… brought into contact with a dissimilar one via friction [1], is an available, stable and efficient method to realize the mechanical-to-electrical energy conversion. Until now, this phenomenon has been investigated for insulators like polymers and silicon dioxide, and zero-bandgap semiconductor …
-
Finite Element Analysis of Thermal Buckling in Automotive Clutch and Brake Discs
… material model. The thermal buckling analysis of friction discs with friction material layer, cone angle geometry and fixed teeth boundary conditions are also studied in detail. The angular geometry and the fixed teeth can improve the buckling temperature significantly. Young’s Modulus has no …