Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 25 for “"Friction modeling"”.
-
Modal Interactions and Jointed Structures
… to assembled structures, introduce contact and friction resulting in nonlinear vibration behavior. Specifically, properties of linear modal analysis including constant modal frequencies and damping and the decoupling of modes break down in the case of nonlinear vibration. Of interest here, modal …
-
Correlation Work on Shaker Rig Tests and Simulations - An investigation of damper, bushing, friction and tire modeling with respect to vertical vibration insulation
… dynamics, such as damper, bushing, tire and friction modeling. The technical background section of this work should therefore provide all the needed information to understand the carried out work, also for a reader new to this field. As a next step, simulation models are developed ranging …
-
Design, Characterization, and Modeling of the MAHI Open Exo
… presented, along with the characterization and friction modeling of the device. The dynamic model provides the basis for a future human-robot combined model, which will be used for personalized, model- based control strategies.
-
Calibration and Validation of a High-Fidelity Discrete Element Method (DEM) Based Soil Model Using Physical Terramechanical Experiments
… contents using a conventional Asperity-Spring friction modeling technique is presented in this thesis. The procedure is based on the outcomes of two physical soil experiments: (1) Compression and (2) unconfined shear strength at various levels of normal stress and normal pre-stress. The …
-
Dynamic friction measurement, modeling, and compensation for precise motion control
In this thesis, measurements of dynamic friction in a hydrodynamic journal bearing were performed for varying sinusoidal velocity excitations, loads, and lubricants. The results indicate that the friction data displays a negative slope in the mixed region of friction vs. velocity (f-v) curves, and …
-
The study of friction variation with temperature in a harmonic drive system : modeling and control
This thesis studies the effects of temperature in friction modeling for a harmonic drive. A mathematic model of how friction varies with temperature change is built based on the exponential friction model. The mathematic model is then used in building the nonlinear dynamic model of the harmonic …
-
Machine Learning and System Identification for Estimation in Physical Systems
… expansions will be used to add nonlinear modeling power while keeping data requirements practical.The thesis covers a wide range of applications, many inspired by applications within robotics, but also extending outside this already wide field.Usage of the proposed methods and algorithms …
-
Investigation of dynamic friction in lubricated surfaces
… is concerned with the development of friction models for lubricated contacts. A few analytical models have been developed to investigate the friction under dynamic velocity conditions. In this study, two different tribological situations such as conformal and non-conformal contacts …
-
Kinematic and Dynamic Evaluation of Lug Drive Track Mechanism Found on Electric Mining Shovels
… and dynamics of lug drive track systems. Friction at the sprocket, depth of sprocket engagement, and pressure angle influence loading on connecting pins and general performance of the system. Obtaining an understanding of the interaction of these design parameters is required. Once the …
-
Canonical equations of motion and estimation of parameters in the analysis of impact problems.
… or material properties. The influence of friction modeling in the magnitude and the direction of the total force at the contact surfaces is discussed. The dynamics of a vehicle collision is studied in order to illustrate the efficiency of obtaining a solution to the canonical equations, …
-
System Identification and Adaptive Compensation of Friction in Manufacturing Automation Systems
… mitigation or reduction of positioning errors is modeling, identifying, and compensating friction in appropriate manner. In addition, accurate modeling of feed drive systems is essential in elimination of these positioning errors. In this thesis, the precision control of feed drives is studied …
-
Analysis and Control of High-Speed Wheeled Vehicles
… of the vehicle dynamics. While most of the modeling issues of ground-vehicles/automobiles are already well established in the literature, lack of understanding of the physics associated with friction generation results in ad-hoc approaches to tire friction modeling. In this work we revisit …
-
Investigation of Acceleration Dependent Nonlinear Lubricated Friction in Hydraulic Actuation Systems
Lubricated friction issues are central to all hydraulic actuation systems undergoing motion and any in-depth understanding of the nature of lubricated friction will advance future component design. The classic friction models of hydraulic actuation systems under steady state conditions and their …
-
Real Time Torque and Drag Analysis during Directional Drilling
… than twofold during recent years. The wellbore friction, torque and drag, between drill string and the wellbore wall is the most critical issue which limits the drilling industry to go beyond a certain measured depth. Surface torque is defined as the moment required rotating the entire drill …
-
Direct Sensitivity Analysis of Spatial Multibody Systems with Joint Friction
… systems. Multibody formulations with joint friction were developed in the recent years and these systems have to be modeled by highly non-linear differential algebraic equations (DAEs) that are difficult to solve using numerical methods. The sensitivity analysis of such systems and the …
-
Fault simulator for proportional solenoid valves
… of failure in spool valves is an increase in the friction between the spool and valve, due to wear, contamination and dirt, which renders the valve inoperable. In this research, a non-destructive fault simulator was developed which induced artificial friction faults in the PSV. The PSV consisted …
-
Dynamical Adaptive Backstepping-Sliding Mode Control of Penumatic Actuator
… reference tracking at low speed motion, where friction has strong effect to the system behaviors. The design of the nonlinear controller presented in this thesis is based on the formalism of Lyapunov stability theory. The controller is constructed through a dynamical adaptive …
-
Modeling of Frictional Contact Conditions in Structures
This thesis explores two aspects of modeling the behavior of joint friction in structures. The first aspect deals with the accurate and efficient simulation of a simple system that incorporates the LuGre friction law. Energy transfer and dissipation in a structural joint model is the second topic …
-
Modeling of precision motion control systems: a relay feedback approach
In this thesis, various models and modeling techniques is developed for motion control systems, mainly with relay feedback approaches. First, a data-driven model is developed for valve stiction. Secondly, both time-domain and frequency domain modeling methods are developed for friction-impended …
Page 1 of 2