Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 109 for “"Fuel Assembly"”.

  1. Reactivity control of a PWR 19x19 uranium silicide fuel assembly

    … the goal of increased power density. The I2S-LWR fuel assembly takes on a 19x19 lattice with reduced fuel rod dimensions relative to traditional Westinghouse-type 17x17 PWR fuel assemblies. It is anticipated that the I2S-LWR will eventually employ uranium silicide (U3Si2) fuel instead of uranium …

    gatech Repository record for Reactivity control of a PWR 19x19 uranium silicide fuel assembly (opens in a new tab)

  2. Within-lattice nuclear fuel assembly loading optimization by simulated annealing

    … engine applicable to light water reactor (LWR) fuel assembly loading design. The optimization technique employed is the simulated annealing (SA) algorithm [1], while the evaluation of design objectives and constraints is handled by coupling to the lattice-physics code CPM-2 [2]. The optimization …

    iastate Repository record for Within-lattice nuclear fuel assembly loading optimization by simulated annealing (opens in a new tab)

  3. Pwr fuel assembly optimization using adaptive simulated annealing coupled with translat

    … produce optimal operation parameters for a 15x15 fuel assembly to be used in an operating nuclear power reactor. The two main cases of optimization are: one that finds the optimal 235U enrichment layout of the fuel pins in the assembly and another that finds both the optimal 235U enrichments where …

    tamu Repository record for Pwr fuel assembly optimization using adaptive simulated annealing coupled with translat (opens in a new tab)

  4. Multi-Recycling of Transuranic Elements in a Modified PWR Fuel Assembly

    … in the United States is stored in spent fuel pools and dry casks throughout the country awaiting a permanent disposal solution. One efficient solution would be to remove the actinides from the waste and transmute these isotopes in a fast spectrum reactor. Currently this technology is …

    tamu Repository record for Multi-Recycling of Transuranic Elements in a Modified PWR Fuel Assembly (opens in a new tab)

  5. Spatio-Temporal Turbulent Characterization of a Nuclear Reactor Fuel Assembly with Spacer Grid

    The present work will illustrate a series of numerical studies, performed to evaluate the predictive capabilities of various turbulence modeling approaches, applied to a typical pressurized water reactor spacer grid, with mixing vanes. Physical insight into the turbulent spatio-temporal structure …

    tamu Repository record for Spatio-Temporal Turbulent Characterization of a Nuclear Reactor Fuel Assembly with Spacer Grid (opens in a new tab)

  6. NESTLE to ORIGAMI Coupling: A Nuclear Non-proliferation Tool for LWR Fuel Assembly Isotope Analysis

    … the impact of operator induced changes on LWR assembly isotope production. The paper presents an experimental method by which to test the ability of an operator to manipulate the core neutron spectrum in order to produce higher quality plutonium for weapons use. The paper presents two plutonium …

    utk-theses Repository record for NESTLE to ORIGAMI Coupling: A Nuclear Non-proliferation Tool for LWR Fuel Assembly Isotope Analysis (opens in a new tab)

  7. Design and PIV Measurements on a Wire-Wrapped 61-Rod Hexagonal Fuel Assembly Experimental Facility

    … existing conservatisms in thermal-hydraulic fuel assembly analysis to be minimized. This will lead to more profitable and safer fuel designs. In the past, thermal-hydraulic experiments were performed on sodium fast reactor fuel assemblies. Unfortunately, the data collected is not suitable for …

    tamu Repository record for Design and PIV Measurements on a Wire-Wrapped 61-Rod Hexagonal Fuel Assembly Experimental Facility (opens in a new tab)

  8. Optimization of an AP1000 fuel assembly for the transmutation of plutonium and minor actinides, The

    … produces twenty metric tons of used nuclear fuel per year, containing approximately 95 wt% uranium, 1 wt% plutonium, and 4 wt% fission products and transuranic elements. Fast reactors are a preferred option for the transmutation of plutonium and minor actinides; however, an optimistic …

    colo-mines Repository record for Optimization of an AP1000 fuel assembly for the transmutation of plutonium and minor actinides, The (opens in a new tab)

  9. TRACE code validation of boiling water reactor spray cooling injection into a SVEA fuel assembly

    … emergency spray cooling injection over SVEA-type fuel assemblies. The US NRC thermal-hydraulics code TRACE version 5.0 Patch 4 has been chosen to simulate the separate-effect tests performed by ASEA-ATOM. The computational model was evaluated by performing forward uncertainty quantification using …

    uiuc Repository record for TRACE code validation of boiling water reactor spray cooling injection into a SVEA fuel assembly (opens in a new tab)

  10. Neutronic Characteristics of Using Zirconium Diboride and Gadolinium in a Westinghouse 17 X 17 Fuel Assembly

    … In order to achieve this, variations in fuel composition, fuel pin arrangement, and burnable absorber distribution have been proposed. Burnable absorbers are materials that absorb the neutrons that cause a nuclear fission reaction and are consumed (burned) in the process. With a higher …

    south-carolina Repository record for Neutronic Characteristics of Using Zirconium Diboride and Gadolinium in a Westinghouse 17 X 17 Fuel Assembly (opens in a new tab)

  11. Two-phase CFD analyses in fuel assembly sub-channels of Pressurized Water Reactors under swirl conditions

    … for the thermal-hydraulic design optimization of fuel assemblies (FA). In contrast, two-phase CFD-applications are still in the state of development. The work presented in this thesis shows contributions towards the detailed two-phase modeling of boiling flows under swirl conditions in sub-channel …

    qucosa-diss

  12. Thermal-hydraulic analysis of a spectral shift reactor core

    … analysis of a mechanical spectral shift reactor fuel assembly. In this reactor type, the fuel to water volume ratio is changed to shift the neutron energy spectrum and control reactivity. The ability to handle different fuel to water ratios is the unique feature of this program. The required …

    vt Repository record for Thermal-hydraulic analysis of a spectral shift reactor core (opens in a new tab)

  13. Investigations on Neutron Flux Fluctuations in Pressurized Water Reactors

    … driven vibration of major parts of the fuel-assembly ensemble triggers the main contribution to the observed neutron flux fluctuations. The fluctuation correlations are supposed to result from the correlations of the fuel-assembly vibration. This idea was tested using the time-domain …

    qucosa-diss

  14. Development and assessment of CFD models including a supplemental program code for analyzing buoyancy-driven flows through BWR fuel assemblies in SFP complete LOCA scenarios

    … analysis code, MELCOR, in one of several spent fuel pool (SFP) complete loss-of-coolant accident (LOCA) scenarios. While the scope of experimental work performed by Sandia National Laboratories (SNL) extends well beyond that which is reasonably addressed by our allotted resources and …

    texas Repository record for Development and assessment of CFD models including a supplemental program code for analyzing buoyancy-driven flows through BWR fuel assemblies in SFP complete LOCA scenarios (opens in a new tab)

  15. Thermal-Hydraulic Analysis of Advanced Mixed-Oxide Fuel Assemblies with VIPRE-01

    Two new fuel assembly designs for light water reactors using advanced mixed-oxide fuels have been proposed to reduce the radiotoxicity of used nuclear fuel discharged from nuclear power plants. The research efforts of this thesis are the first to consider the effects of burnup on advanced …

    tamu Repository record for Thermal-Hydraulic Analysis of Advanced Mixed-Oxide Fuel Assemblies with VIPRE-01 (opens in a new tab)

  16. Reactor power history from fission product signatures

    … be used to uniquely identify a specific spent fuel assembly in order to improve international safeguards. This capability would help prevent and deter potential diversion of spent fuel for a nuclear weapons program. The power history experienced by a fuel assembly is distinct and could serve as …

    tamu Repository record for Reactor power history from fission product signatures (opens in a new tab)

  17. Cosmic ray muons for spent nuclear fuel monitoring

    … a steady increase in the volume of spent nuclear fuel stored on-site (at reactor) as currently there is no permanent disposal option. No alternative disposal path is available and storage of spent nuclear fuel in dry storage containers is anticipated for the near future. In this dissertation, a …

    purdue-thes Repository record for Cosmic ray muons for spent nuclear fuel monitoring (opens in a new tab)

Page 1 of 6