Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 51 for “"Fuel additive"”.
-
Production of oxygenated fuel additive from glycerol
Glycerol ethers have the potential to be used as additives with biodiesel as it can be easily blended and can improve fuel performance. It also facilitates easier passing of fuel through injector. Addition of glycerol ether increases the cetane number and improves the antiknocking property. …
-
ΔΙΕΡΕΥΝΗΣΗ ΤΗΣ ΔΡΑΣΗΣ ΚΑΤΑΛΥΤΩΝ ΣΤΗΝ ΑΝΑΓΕΝΝΗΣΗ ΤΗΣ ΚΕΡΑΜΙΚΗΣ ΠΑΓΙΔΑΣ ΑΙΘΑΛΗΣ
… MORE SPECIFICALLY, MIXING OF CATALYTIC FUEL ADDITIVES IN DIESEL FUEL, LEADS TO SIGNIFICANT DECREASES IN REGENERATION TEMPERATURE LEVELS. THE APPLICATION OF CATALYST IN CERAMIC TRAP SYSTEMS, PRESENT A NUMBER OF SPECIAL CHARACTERISTICS, THAT ARE EXTENSIVELY ANALYZED. THE STUDY INVESTIGATES …
-
A gas turbine combustor test facility for fuel composition investigations
… The facility will be used for subsequent fuel composition/fuel additive evaluations to determine the resulting effects on soot production and consumption rates.
-
Study of the Variations in Continuous Diesel Particulate Matter Size Measurements and Effect of Fuel Properties on DPM Size
… the variations in DPM measurements due to fuel alteration or changes in other parameters such as relative humidity and dilution ratio. The Cambustion DMS-500, a fast particle spectrometer, was used to continuously sample diesel aerosol from a HDDE test-cell dilution tunnel. Samples were …
-
Fuel Additives for Hypersonic Flight Applications
Seeking to establish an alternative fuel to Jet Propellant 7 (JP-7) for hypersonic flight applications, Jet Propellant 10 (JP-10) has arisen as a potential replacement fuel and is being extensively studied computationally and experimentally. A common objective in fuel science is to increase the …
-
An investigation of particle size measurement using non-intrusive optical techniques in a gas turbine combustor
… ratio techniques to determine the effects of fuel additives on particle sizes and mass concentrations in a T-63 combustor and evaluated several improvements to the T-63 diagnostic system. Data from both optical methods indicated an increase in particle size in a range of .06 to .10 microns …
-
Investigation of Swirl Assisted Colorless Distributed Combustion (CDC) for Gas Turbine Application
… This thesis investigates the impact of fuel enrichment on CDC conditions by using naphthalene as a fuel additive in ethanol to increase the heating value without compromising ultra-low emissions, in addition to investigating how CDC fuel flexibility can mitigate instability associate …
-
Simulation of effects of ethanol on benzene plume length using RT3D with a general substrate interaction module
… developed to evaluate the effect of the common fuel additive, ethanol, on benzene fate and transport in groundwater, and to discern the most influential benzene plume-elongating mechanisms. The module, developed for the RT3D (Reactive Transport in 3-Dimensions) model, includes previously …
-
A Kinetic Analysis on Hydrolysis and Hydrothermal Conversion of Cellulose to Dodecane
… formation of a possible dodecane isomer, a known fuel additive. We also examined the role of hydrogen content in conversion and proposed a probable reaction mechanism. Kinetic analysis yielded activation energies of 3.57 kJ/mol for X Pell R, 6.74 kJ/mol for MoO₃, and 7.24 kJ/mol for H₂MoO₃, …
-
Combustion signatures of various energetic metal powders in a shock tube experiment
Metal additives are used in explosives and solid propellants in order to increase the energetic output and effectiveness of the explosives or fuel. Aluminum has been the primary solid fuel additive to solid fuel to improve the combustive properties of propellants. Several other metals are being …
-
The Influence on Combustion of Compounds Containing a Direct Chromium-Carbon Linkage
… most suitable chromium compound for testing as a fuel additive. The various methods of preparing the hexacarbonyl are reviewed. The remainder of the thesis is divided into five sections and two appendices. Section 1 describes attempts to prepare chromium hexacarbonyl by three different methods, …
-
Design, Synthesis and Evaluation of Phosphines as Potential Oxygen-Scavengers in Future Jet Fuels
Fuels for future jet engines need to be stable at very high combustion temperatures. Oxygen scavengers confer oxidative and pyrolytic stability on jet fuels, thus preventing deposit formation on engine surfaces and prolonging engine life. This dissertation examines the design, synthesis and …
-
An investigation into a nano-fuel technology combustion enhancer for diesel engines to achieve increased combustion efficiency
… without the internal combustion engine and the fuel that provides them with the necessary energy. Unfortunately, there are a number of negative side effects to using these engines, such as the harmful greenhouse gases produced by the combustion process as well as the continuous increase in fuel …
-
Preparation, characterisation and toxicology of cerium oxide nanoparticles
… polishing of silicon wafers and as a diesel fuel additive. A proportion of nanoparticles will be released into the environment. The size of nanoparticles provides the potential for interaction with living cells, as they are similar in size to natural organic matter and biological molecules. …
-
The Investigation of the Low Temperature Combustion of Mesitylene and Tert-Amyl Methyl Ether by Synchrotron Photoionization Mass Spectrometry
… Laboratories (LBNL). The need for renewable fuel sources, the need for the study of their combustion in the contexts of homogenous charge combustion ignition (HCCI) engines can be found in Chapter 1. The components of the experimental set-up used throughout this thesis—time-of-flight mass …
-
Analysis of graphite oxide and graphene as enhancers for NATO F-76 diesel fuel
… of graphite oxide (GO) and graphene (G) as fuel additives. Both compounds are variations of the honeycomb structure found in graphite but possess higher surface areas and different amounts of oxygen functional groups. The use of graphite oxide was considered due to its ability to release the …
-
Valorization of biomass using novel catalytic and electrocatalytic processes
… along with predicted shortages of fossil fuels in the near future, have accelerated the search for alternative renewable energy sources. Biomass is a promising renewable resource for the production of value-added fuels and chemicals. In this work, triglycerides, furfural and …
-
Modelling a process for dimerisation of 2-methylpropene
… to replace methyl-tert-butyl ether (MTBE) as a fuel additive. Isooctane is hydrogenated from isooctene, which is produced by dimerizing 2-methylpropene. In dimerization, two 2-methylpropene molecules react on ion-exchange resin catalyst to produce isooctene isomers (2,4,4-trimethyl-1-pentene, …
-
EXPLORING CO2 FUCTIONALIZATION WITH D6 COMPLEXES AND MATERIALS
… yield (CCC)Ir–OAc.Ethanol is commonly used as a fuel additive, but there are advantages to utilizing butanol as a drop-in substitution for ethanol. We investigated this downstream transformation of ethanol upgrading to butanol. In these systems, the reactant ethanol would be derived from CO2 …
-
Rational design and novel bioprocesses for low-carbon biofuels and bioproducts
The reduction of fossil fuel consumption and carbon emissions is one of the greatest challenges of our time, and innovative solutions are necessary to prevent climate catastrophe while maintaining economic development and modern ways of life. Biofuels and bioproducts can provide low-carbon …
Page 1 of 3