Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 26 for “"Fuel cell design"”.
-
Solid Oxide Fuel Cell design and Application of Formal Methods
The design of solid oxide fuel cells has inherent conflicts and compromises due to the mechanical and electrochemical requirements. The design objective is to reduce the fabrication cost of cell components while maintaining high efficiency and reliability. Solid oxide fuel cells have yet to go …
-
Three-dimensional numerical study of proton exchange membrane fuel cell design
Performance of proton exchange membrane (PEM) fuel cells is dependent of a set of complex physical and chemical processes occurring simultaneously. Bipolar plates are important components of PEM fuel cells because they are the first stage of the flow distribution system. A non-uniform flow …
-
THE EFFECT OF RELATIVE ELECTRODE SIZE ON THE PERFORMANCE OF A SUPERCAPACITIVE MICROBIAL FUEL CELL DESIGN
Supercapacitive microbial fuel cells with various anode and cathode dimensions were investigated in order to determine the effect on capacitance and delivered power quality. The cathode size was determined to be the limiting component of the system, while anode size showed little effect on the …
-
Investigation and Advancement of Novel Single Compartment Hydrogen Peroxide Fuel Cells
Fuel cells are electrochemical devices that utilize coordinated redox reactions to directly convert chemical energy of select chemicals as the fuel into electrical energy. Hydrogen peroxide fuel cells have been a recent focus of research and advancement efforts in the past two decades. The main …
-
Computational modeling and optimization of proton exchange membrane fuel cells
… commercialization of proton exchange membrane fuel cells. In this thesis, a computational framework for fuel cell analysis and optimization is presented as an innovative alternative to the time consuming trial-and-error process currently used for fuel cell design. The framework is based on a …
-
Hydraulic ram pressure measurements.
… loads and catastrophic failure of liquid-filled fuel tanks impacted by high speed projectiles. Hydraulic ram is divided into two phases: the shock phase and the drag phase. Analytic models have been proposed for the shock phase by Yurkovich and for the drag phase by Lundstrom. An attempt was made …
-
Rapid fault detection and mitigation strategies in the low temperature PEM fuel cell
… temperature polymer electrolyte membrane (PEM) fuel cell faces several hurdles to commercialization in the form of cost and durability. One approach to improve durability and performance of the PEM fuel cell is presented here in a new rapid diagnostic system that is capable of detecting the …
-
Combining In Situ Measurements and Advanced Catalyst Layer Modeling in PEM Fuel Cells
Catalyst layer modeling can be a useful tool for fuel cell design. By comparing numerical results to experimental results, numerical models can provide a better understanding of the physical processes occurring within the fuel cell catalyst layer. This can lead to design optimization and cost …
-
ΜΕΛΕΤΗ ΗΛΕΚΤΡΟΚΑΤΑΛΥΤΙΚΩΝ ΚΑΙ ΚΑΤΑΛΥΤΙΚΩΝ ΑΝΤΙΔΡΑΣΕΩΝ ΣΕ ΚΕΛΛΙΑ ΚΑΥΣΗΣ ΚΑΙ ΑΝΤΙΔΡΑΣΤΗΡΕΣ ΤΡΙΩΝ ΦΑΣΕΩΝ
… OXIDATION OF NH3 TO NO WAS INVESTIGATED IN THE FUEL CELL NH3, NO, N2, PT OR PT-10%RHIIZRO2(8%Y2O3)IIPT OR PT-10%RH, AIR AT TEMPERATURES BETWEEN 950- 1300 K, AND ATMOSPERIC PRESSURE. THE NEW FUEL CELL DESIGN WITH THINER ELECTROLYTE AND MODIFIED ELECTRODE PREPERATION RESULTS SELECTIVITY UP TO 95% …
-
Carbon deposition on Ni/YSZ anode SOFC for direct methane steam reforming
Solid Oxide Fuel Cells (SOFCs) are electrochemical devices that produce electricity directly from oxidizing fuels. Compared to direct combustion of hydrogen to generate power, it has a big advantage in aspects from efficiency and safety when using hydrogen as the fuel of SOFCs. Hydrocarbon …
-
Evaluation of the Effects of Microporous Layer Characteristics and Assembly Parameters on the Performance and Durability of a Planar PEM Fuel Cell
… significant portion of proton exchange membrane fuel cell (PEMFC) work has been focused on understanding and optimizing the functions of the microporous layer (MPL). Researchers have found that including this layer, composed of carbon black and TeflonTM (PTFE), between the gas diffusion layer …
-
Novel transport layer characterization and synthesis for proton exchange membrane fuel cells
Fuel cells are a promising energy conversion technology compatible with developing renewably sourced primary energy distribution. Proton exchange membrane (PEM) fuel cells are particularly suitable for automotive and portable applications. The present thesis advances novel PEM fuel cell porous …
-
Experimental and computational study of an air-breathing micro liquid fuel cell with an extended active anode catalyst region
… energy power system. Micro direct methanol fuel cells (µDMFCs) are considered as one of the appropriate alternatives to rechargeable battery technology for portable power devices. Although a significant amount of work has been done with µDMFCs, it is still a design challenge to miniaturize …
-
Defining and Validating Convergence Criteria for the Determination of Representative Elementary Volume in Porous Media
… identifying REVs based on a threshold criteria designed to reduce computational demands. An REV is defined as the volume in which at least 80% of 100 randomly sampled subdomains yield porosity or tortuosity values within 20% of the overall average. The method was applied to both synthetic …
-
Microfluidics for fuel cell applications
… work, a microfluidics approach is applied to two fuel cell related projects; the study of deformation and contact angle hysteresis on water invasion in porous media and the introduction of bubble fuel cells. This work was carried out as collaboration between the microfluidics and CFCE groups in …
-
Ni Stability in Anion Exchange Membrane Fuel Cells
… with no greenhouse gas (GHG) emission. Hydrogen fuel cells convert the chemical energy of hydrogen gas into electricity. In 2016, the Paris Climate Agreement was signed with major countries and economic entities, which has created a massive demand for hydrogen fuel cells. However, the …
-
SOFC Modeling in Femlab
… the primary aim to model a given Solid Oxide Fuel Cell design, the Rutquist cell, in Femlab. The model is intended to provide information on current-voltage characteristics, power development and the temperature profile, both during startup and operation. The secondary purpose was to evaluate …
-
NON-PLATINUM GROUP METAL OXGYEN REDUCTION CATALYSTS AND THEIR MECHANISM IN BOTH ACID AND ALKALINE MEDIA: THE EFFECT OF THE CATALYST PRECURSOR AND THE IONOMER ON OXYGEN REDUCTION
… an attractive strategy for lowering the cost of fuel cells, but much more development is needed in order to replace platinum, especially at the cathode where oxygen is reduced. Research groups worldwide have donated material for a study in which precursor structure to catalyst activity …
-
Enzymatic biofuel cells in a sandwich geometry with compressed carbon nanotubes/enzyme electrodes & hybrid patch applications
Enzymatic biofuel cells (EBFCs) convert the chemical energy of biofuels, such as glucose and methanol, into electrical energy by employing enzymes as catalysts. In contrast to conventional fuel cells, EBFCs have a simple membrane-free fuel cell design due to the high catalytic specificity of the …
-
Design, Fabrication and Characterization of Novel Planar Solid Oxide Fuel Cells
Planar solid oxide fuel cells (SOFCs) were designed, fabricated and characterized in order to develop a (1) cost-effective method for fabrication of thin electrolyte layers, (2) hermetic sealing and (3) stable interconnects. Electrophoretic deposition (EPD) was discovered to be an excellent method …
Page 1 of 2