Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 8 of 8 for “"Fuel swelling"”.
-
Silicide fuel swelling behavior and its performance in I2S-LWR
The swelling mechanisms of U3Si2 under neutron irradiation in reactor conditions are not unequivocally known. The limited experimental evidence that is available suggests that the main driver of the swelling in this material would be fission gases accumulation at crystalline grain boundaries. The …
-
Comparison of fission gas swelling models for amorphous u₃si₂ and crystalline uo₂
… Safe LWR) project for a direct comparison of fuel swelling and fission gas bubble formation between U₃Si₂ and UO₂ fuels. Uranium silicide is evaluated using a model developed by Dr. J. Rest with the fuel in a amorphous state. The uranium dioxide is examined with two separate models developed …
-
Characterization and modeling of high burn-up mixed oxide fuel
… of the materials involved in these reactors. The fuel is particularly limiting due to fission gas generation, changes in thermal conductivity, microstructure changes within the fuel, fuel swelling, and fuel-cladding chemical interaction (FCCI). Highly irradiated fuel is radially inhomogeneous in …
-
Fission Gas Behavior in Nuclear Fuels
… an overview of fission gas behavior in nuclear fuels, specifically Xe and Kr gas bubble evolution in UO2. This is important due to the fact that the diffusion of these noble gases and their precipitation directly affect fuel swelling and gas release to the fuel rod plenum, which impacts fuel …
-
An Examination Of Thermal Stress As A Mechanism For Cladding Failure In A Hypothetical Lmrbr Transiet
Stainless steel clad uranium dioxide fuel pellets were pulse irradiated in the Annular Core Pulse Reactor to evaluate thermal stress as a contributing mechanism for cladding failure in hypothetical LMFBR transients. The 6.2 mm diameter UO2 fuel pellets, with enrichments up to 25 w/o 235UO2, were …
-
Methods for Investigating Gas Bubble Formation in Uranium-Zirconium Alloys
Uranium-zirconium alloy nuclear fuels have many advantages as compared with ceramic fuels, especially for fast reactor systems. However, metallic fuels aren’t currently used in commercial power production due in part to issues with fuel swelling during irradiation. A major contributor to this …
-
Uncertainty Quantification and Sensitivity Analysis of Multiphysics Environments for Application in Pressurized Water Reactor Design
… includes thermal hydraulics), neutronics, and fuel performance. The nuclear industry has developed a variety of codes over the course of forty years, each with an emphasis within a specific discipline. Perhaps the greatest difficulty in mathematically modeling a nuclear reactor, is choosing …
-
Molecular Dynamics Studies of Grain Boundary Mobilities in Metallic and Oxide Fuels
… In current light water reactors, the most common fuel is uranium dioxide (UO2), an oxide ceramic. There is also ongoing research examining uranium-based based metallic fuels, such as uranium-molybdenum (U-Mo) fuels with low uranium (U) enrichment for research reactors as part of a broader effort …