Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 25 for “"Full-Field Measurement"”.

  1. Real-time Prediction of Dynamic Systems Based on Computer Modeling

    … cooperative autonomous vehicle system and the full-field measurement system. For the cooperative autonomous vehicle system a novel parallel grid-based RBE technique is firstly proposed. The formulations are derived by identifying the parallel computation in the prediction and correction …

    vt Repository record for Real-time Prediction of Dynamic Systems Based on Computer Modeling (opens in a new tab)

  2. Characterization of Fatigue Crack Growth in Unidirectional Carbon Fiber Epoxy Composites Using Digital Image Correlation

    … laminated composites by measuring deformation fields directly from the surface of the material using Digital Image Correlation (DIC). Energy release rate of laminated composites was determined from DIC measurements using Linear Elastic Fracture Mechanics (LEFM) theory under different mixed mode …

    maryland Repository record for Characterization of Fatigue Crack Growth in Unidirectional Carbon Fiber Epoxy Composites Using Digital Image Correlation (opens in a new tab)

  3. In-plane stress analysis using tensor field photoelasticity

    … of the tensor nature of these quantities. Full field measurement of all three stress components is desirable, since plastic deformation or failure can result from any combination of the three. A new photoelastic stress measurement method is presented for evaluating all three in-plane stress …

    ubc Repository record for In-plane stress analysis using tensor field photoelasticity (opens in a new tab) Download PDF for In-plane stress analysis using tensor field photoelasticity (opens in a new tab)

  4. An Analysis of Non-Uniform Stress States in Finite Thin Film/substrate System: The Need of Full-Field Curvature Measurements

    … dependence on curvatures, which make full-field measurement a necessity for the experimental inference of such stresses. We also extend the methodologies to the case that of single thin film/substrate subjected to non-uniform anisotropic misfit strain. The film stresses and system …

    uiuc Repository record for An Analysis of Non-Uniform Stress States in Finite Thin Film/substrate System: The Need of Full-Field Curvature Measurements (opens in a new tab)

  5. Intermediate strain rate testing methodologies and full-field optical strain measurement techniques for composite materials characterisation

    Two optical full-field strain measurement techniques, Digital Image Correlation and the Grid Method, are applied to characterise the strain-rate dependent constitutive behaviour of composite materials. Optical strain measurement techniques based on full-field images are well established for …

    soton Download PDF for Intermediate strain rate testing methodologies and full-field optical strain measurement techniques for composite materials characterisation (opens in a new tab)

  6. Importance of Exposure Time on Digital Image Correlation (DIC) at Extreme Temperatures

    … materials must be characterized using suitable measurement methods. DIC is a popular and versatile method in full-field measurement. In brief, DIC compares images of a sample between its undeformed and deformed state in order to get displacement and strain field maps. Since the images are …

    utahstate Repository record for Importance of Exposure Time on Digital Image Correlation (DIC) at Extreme Temperatures (opens in a new tab)

  7. Image-based methods for the identification of in-plane composite moduli at high strain rates

    … Impact (IBII) test technique. Using the Virtual Fields Method (VFM), full-field measurements and rigid body virtual fields were included in the principle of virtual work to derive stress averages on a test sample. Transverse and shear moduli were then identified from linear fits to the …

    soton Download PDF for Image-based methods for the identification of in-plane composite moduli at high strain rates (opens in a new tab)

  8. Development of optical techniques for the experimental analysis of local stress and strain distributions in adhesively bonded composite joints

    … are validated against independent infra-red measurements using Thermoelastic Stress Analysis (TSA). Limitations in the TSA analysis approach are identified around joint discontinuity due to the varying principal stress direction. A new TSA analysis methodology is presented to overcome this. …

    soton Download PDF for Development of optical techniques for the experimental analysis of local stress and strain distributions in adhesively bonded composite joints (opens in a new tab)

  9. Determination of residual stress using phase shift Moire interferometry.

    … in that it has the advantage of high sensitivity full field measurement. For a cracked structure, the integrity of the structure depends not only on the external applied loads but also on residual stress state at the crack tip. Hence, determination of the residual stress intensity at the crack tip …

    wvu Repository record for Determination of residual stress using phase shift Moire interferometry. (opens in a new tab)

  10. Deformation Of Multifunctional Materials At Various Time And Length Scales: A DIC-Based Study

    … woven composites and polymeric foams, using full-field measurements. Attention has been especially drawn towards the challenges associated with characterizing these materials at extreme length and time scales, and investigating the advantages of full-field measurements to resolve the existing …

    south-carolina Repository record for Deformation Of Multifunctional Materials At Various Time And Length Scales: A DIC-Based Study (opens in a new tab)

  11. Development of convective reflow-projection moire warpage measurement system and prediction of solder bump reliability on board assemblies affected by warpage

    … a convective reflow and projection moire warpage measurement system was developed. The system is the first real-time, non-contact, and full-field measurement system capable of measuring PWB/PWBA/chip package warpage with the projection moire technique during different thermal reflow processes. In …

    gatech Repository record for Development of convective reflow-projection moire warpage measurement system and prediction of solder bump reliability on board assemblies affected by warpage (opens in a new tab)

  12. Full Field Reconstruction Enhanced With Operational Modal Analysis and Compressed Sensing for General Dynamic Loading

    … several discrete locations. The accuracy of the measurements varies with the location and orientation of the sensors. Practically, it is not possible to place sensors at all the critical locations for different excitations. Therefore, an approach that derives the full field response using a …

    vt Repository record for Full Field Reconstruction Enhanced With Operational Modal Analysis and Compressed Sensing for General Dynamic Loading (opens in a new tab)

  13. Three-dimensional wave measurement by image processing

    … the dynamics of oceans, making accurate measurement imperative. Various wave probes have been developed to fulfil this purpose, each employing distinct principles to capture the nuances of the free water surface. From resistance and capacitance wave probes to ultrasonic wave probes and …

    strathclyde Repository record for Three-dimensional wave measurement by image processing (opens in a new tab)

  14. Measurement of Creep Deformation in Weldments

    … has developed a new high temperature strain measurement system using Digital Image Correlation (DIC) in order to investigate spatially varying and time dependent deformation during high temperature creep tests of engineering materials. Several challenges associated with measuring creep …

    the-open-u Download PDF for Measurement of Creep Deformation in Weldments (opens in a new tab)

  15. Stress and creep damage evolution in materials for ultra-supercritical power plants

    … towards t he weld root region and these were not fully relieved by the applied PWHT. In both conditions substantial tensile direct and hydrostatic stresses existed across the HAZ, including the fine-grained and intercritically-annealed regions, where premature Type IV creep failures manifest in …

    the-open-u Download PDF for Stress and creep damage evolution in materials for ultra-supercritical power plants (opens in a new tab)

  16. Fundamental Experimental Studies In Scaling, Blast Mitigation and Material Processing

    … In both studies, the primary experimental measurement method is three-dimensional digital image correlation (3D-DIC), a non-contacting full-field measurement method that is applicable for both high-rate loading and quasi-static loading conditions. Scaling and Blast Mitigation Studies: A …

    south-carolina Repository record for Fundamental Experimental Studies In Scaling, Blast Mitigation and Material Processing (opens in a new tab)

  17. Ultrasonic velocity tomography method for damage evaluation in rocks

    … Tomography (UVT) technique is one of the full-field measurement technique that can be used, independently or in combination with other techniques, to study the changes in mechanical properties in the material, by mapping the ultrasonic wave velocity in the entire specimen. UVT is capable …

    colo-mines Repository record for Ultrasonic velocity tomography method for damage evaluation in rocks (opens in a new tab)

  18. Adaptive Fringe Projection and Error-Compensated Calibration for Compact 3D Shape-Measurement Systems

    Measurement of the three-dimensional (3-D) shape of an object is needed for both industrial and consumer applications. In industrial applications, compact measurement systems are needed to accomplish certain tasks such as measuring an interior surface in a confined space. In consumer applications, …

    waterloo Repository record for Adaptive Fringe Projection and Error-Compensated Calibration for Compact 3D Shape-Measurement Systems (opens in a new tab)

  19. Experimental and Numerical Nonlinear Dynamics and Stress Field Analysis of Post-Buckled Composite Plates

    … dynamic response and corresponding stress fields can be an important step to help assure the structural integrity of composite structures. To address this issue, this work experimentally and numerically investigates nonlinear dynamics and snap-through of post-buckled laminated composite …

    washington Repository record for Experimental and Numerical Nonlinear Dynamics and Stress Field Analysis of Post-Buckled Composite Plates (opens in a new tab)

Page 1 of 2